Код:
...
LD arch/x86/lib/built-in.o
CC arch/x86/lib/bitops_32.o
CC arch/x86/lib/delay_32.o
AS arch/x86/lib/getuser_32.o
CC arch/x86/lib/memcpy_32.o
AS arch/x86/lib/putuser_32.o
CC arch/x86/lib/string_32.o
CC arch/x86/lib/strstr_32.o
CC arch/x86/lib/usercopy_32.o
AR arch/x86/lib/lib.a
LD vmlinux.o
MODPOST vmlinux.o
WARNING: modpost: Found 25 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC arch/x86/boot/version.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
AS arch/x86/boot/compressed/head_32.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
GZIP arch/x86/boot/compressed/vmlinux.bin.gz
LD arch/x86/boot/compressed/piggy.o
LD arch/x86/boot/compressed/vmlinux
OBJCOPY arch/x86/boot/vmlinux.bin
BUILD arch/x86/boot/bzImage
Root device is (8, 2)
Setup is 11192 bytes (padded to 11264 bytes).
System is 2661 kB
Kernel: arch/x86/boot/bzImage is ready (#8)
Building modules, stage 2.
MODPOST 1 modules
CC drivers/scsi/scsi_wait_scan.mod.o
LD [M] drivers/scsi/scsi_wait_scan.ko
INSTALL drivers/scsi/scsi_wait_scan.ko
DEPMOD 2.6.25-gentoo-r7Конец сборки по команде make CONFIG_DEBUG_SECTION_MISMATCH=y выглядит так:
Код:
...
LD lib/built-in.o
WARNING: lib/built-in.o(.data+0x1c): Section mismatch in reference from the variable percpu_counter_hotcpu_callback_nb.9386 to the function .cpuinit.text:percpu_counter_hotcpu_callback()
The variable percpu_counter_hotcpu_callback_nb.9386 references
the function __cpuinit percpu_counter_hotcpu_callback()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
CC lib/argv_split.o
CC lib/bug.o
CC lib/cmdline.o
CC lib/cpumask.o
CC lib/ctype.o
CC lib/dec_and_lock.o
CC lib/dump_stack.o
CC lib/extable.o
CC lib/idr.o
CC lib/int_sqrt.o
CC lib/ioremap.o
CC lib/irq_regs.o
CC lib/klist.o
CC lib/kobject.o
CC lib/kobject_uevent.o
CC lib/kref.o
CC lib/prio_heap.o
CC lib/prio_tree.o
CC lib/proportions.o
CC lib/radix-tree.o
CC lib/rbtree.o
CC lib/reciprocal_div.o
CC lib/rwsem.o
CC lib/semaphore-sleepers.o
CC lib/sha1.o
CC lib/string.o
CC lib/vsprintf.o
AR lib/lib.a
CC arch/x86/lib/msr-on-cpu.o
LD arch/x86/lib/built-in.o
CC arch/x86/lib/bitops_32.o
CC arch/x86/lib/delay_32.o
AS arch/x86/lib/getuser_32.o
CC arch/x86/lib/memcpy_32.o
AS arch/x86/lib/putuser_32.o
CC arch/x86/lib/string_32.o
CC arch/x86/lib/strstr_32.o
CC arch/x86/lib/usercopy_32.o
AR arch/x86/lib/lib.a
LD vmlinux.o
MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0xf433): Section mismatch in reference from the function cpu_exit_clear() to the function .cpuinit.text:cpu_uninit()
The function cpu_exit_clear() references
the function __cpuinit cpu_uninit().
This is often because cpu_exit_clear lacks a __cpuinit
annotation or the annotation of cpu_uninit is wrong.
WARNING: vmlinux.o(.text+0x182f8): Section mismatch in reference from the function init_hrtick() to the function .cpuinit.text:register_cpu_notifier()
The function init_hrtick() references
the function __cpuinit register_cpu_notifier().
This is often because init_hrtick lacks a __cpuinit
annotation or the annotation of register_cpu_notifier is wrong.
WARNING: vmlinux.o(.text+0x373f7): Section mismatch in reference from the function take_cpu_down() to the variable .cpuinit.data:cpu_chain
The function take_cpu_down() references
the variable __cpuinitdata cpu_chain.
This is often because take_cpu_down lacks a __cpuinitdata
annotation or the annotation of cpu_chain is wrong.
WARNING: vmlinux.o(.text+0x37474): Section mismatch in reference from the function _cpu_down() to the variable .cpuinit.data:cpu_chain
The function _cpu_down() references
the variable __cpuinitdata cpu_chain.
This is often because _cpu_down lacks a __cpuinitdata
annotation or the annotation of cpu_chain is wrong.
WARNING: vmlinux.o(.text+0x3749c): Section mismatch in reference from the function _cpu_down() to the variable .cpuinit.data:cpu_chain
The function _cpu_down() references
the variable __cpuinitdata cpu_chain.
This is often because _cpu_down lacks a __cpuinitdata
annotation or the annotation of cpu_chain is wrong.
WARNING: vmlinux.o(.text+0x37519): Section mismatch in reference from the function _cpu_down() to the variable .cpuinit.data:cpu_chain
The function _cpu_down() references
the variable __cpuinitdata cpu_chain.
This is often because _cpu_down lacks a __cpuinitdata
annotation or the annotation of cpu_chain is wrong.
WARNING: vmlinux.o(.text+0x37559): Section mismatch in reference from the function _cpu_down() to the variable .cpuinit.data:cpu_chain
The function _cpu_down() references
the variable __cpuinitdata cpu_chain.
This is often because _cpu_down lacks a __cpuinitdata
annotation or the annotation of cpu_chain is wrong.
WARNING: vmlinux.o(.text+0x3763a): Section mismatch in reference from the function unregister_cpu_notifier() to the variable .cpuinit.data:cpu_chain
The function unregister_cpu_notifier() references
the variable __cpuinitdata cpu_chain.
This is often because unregister_cpu_notifier lacks a __cpuinitdata
annotation or the annotation of cpu_chain is wrong.
WARNING: vmlinux.o(.text+0x15c338): Section mismatch in reference from the function acpi_processor_install_hotplug_notify() to the function .cpuinit.text:register_cpu_notifier()
The function acpi_processor_install_hotplug_notify() references
the function __cpuinit register_cpu_notifier().
This is often because acpi_processor_install_hotplug_notify lacks a __cpuinit
annotation or the annotation of register_cpu_notifier is wrong.
WARNING: vmlinux.o(.text+0x16f997): Section mismatch in reference from the function store_online() to the function .cpuinit.text:cpu_up()
The function store_online() references
the function __cpuinit cpu_up().
This is often because store_online lacks a __cpuinit
annotation or the annotation of cpu_up is wrong.
WARNING: vmlinux.o(.text+0x26cf82): Section mismatch in reference from the function cpufreq_register_driver() to the function .cpuinit.text:register_cpu_notifier()
The function cpufreq_register_driver() references
the function __cpuinit register_cpu_notifier().
This is often because cpufreq_register_driver lacks a __cpuinit
annotation or the annotation of register_cpu_notifier is wrong.
WARNING: vmlinux.o(.data+0x3190): Section mismatch in reference from the variable profile_cpu_callback_nb.18921 to the function .devinit.text:profile_cpu_callback()
The variable profile_cpu_callback_nb.18921 references
the function __devinit profile_cpu_callback()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x4974): Section mismatch in reference from the variable workqueue_cpu_callback_nb.13238 to the function .devinit.text:workqueue_cpu_callback()
The variable workqueue_cpu_callback_nb.13238 references
the function __devinit workqueue_cpu_callback()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x5580): Section mismatch in reference from the variable relay_hotcpu_callback_nb.17892 to the function .cpuinit.text:relay_hotcpu_callback()
The variable relay_hotcpu_callback_nb.17892 references
the function __cpuinit relay_hotcpu_callback()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0xa8e4): Section mismatch in reference from the variable cpu_callback_nb.23302 to the function .devinit.text:cpu_callback()
The variable cpu_callback_nb.23302 references
the function __devinit cpu_callback()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0xfd30): Section mismatch in reference from the variable percpu_counter_hotcpu_callback_nb.9386 to the function .cpuinit.text:percpu_counter_hotcpu_callback()
The variable percpu_counter_hotcpu_callback_nb.9386 references
the function __cpuinit percpu_counter_hotcpu_callback()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x177e8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_ite887x_exit()
The variable pci_serial_quirks references
the function __devexit pci_ite887x_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x17804): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
The variable pci_serial_quirks references
the function __devexit pci_plx9050_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x17820): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
The variable pci_serial_quirks references
the function __devexit pci_plx9050_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x17858): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
The variable pci_serial_quirks references
the function __devexit pci_plx9050_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x17874): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
The variable pci_serial_quirks references
the function __devexit pci_plx9050_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x17890): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
The variable pci_serial_quirks references
the function __devexit pci_plx9050_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x178ac): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit()
The variable pci_serial_quirks references
the function __devexit sbs_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x178c8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit()
The variable pci_serial_quirks references
the function __devexit sbs_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x178e4): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit()
The variable pci_serial_quirks references
the function __devexit sbs_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x17900): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit()
The variable pci_serial_quirks references
the function __devexit sbs_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x19340): Section mismatch in reference from the variable topology_cpu_callback_nb.10932 to the function .cpuinit.text:topology_cpu_callback()
The variable topology_cpu_callback_nb.10932 references
the function __cpuinit topology_cpu_callback()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC arch/x86/boot/version.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
AS arch/x86/boot/compressed/head_32.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
GZIP arch/x86/boot/compressed/vmlinux.bin.gz
LD arch/x86/boot/compressed/piggy.o
LD arch/x86/boot/compressed/vmlinux
OBJCOPY arch/x86/boot/vmlinux.bin
BUILD arch/x86/boot/bzImage
Root device is (8, 2)
Setup is 11192 bytes (padded to 11264 bytes).
System is 2699 kB
Kernel: arch/x86/boot/bzImage is ready (#7)
Building modules, stage 2.
MODPOST 1 modules
CC drivers/scsi/scsi_wait_scan.mod.o
LD [M] drivers/scsi/scsi_wait_scan.koВот почему у меня собираются только 3 модуля, а никаких, например, для звука нету?
Конфиг прикладываю.
