Видеокарта intel 82945G (Поменяли оборудование, в ubuntu отказался работать GNOME.)

nVidia, ATI, SIS, VIA и др.

Модератор: Модераторы разделов

J2ME
Сообщения: 3

Видеокарта intel 82945G

Сообщение J2ME »

Поменяли оборудование (материнку и ОЗУ), в ubuntu отказался работать GNOME.
Пишет, что проблема в xorge.

Вот мой xorg.conf:

Код: Выделить всё

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Module"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc104"
    Option        "XkbLayout"    "us"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ExplorerPS/2"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
    Driver        "ati"
    BusID        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "Acer AL2017"
    Option        "D-Sub"
#    HorizSync    30-82
#    VertRefresh    56-76
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
    Monitor        "Acer AL2017"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice     "stylus" "SendCoreEvents"
    InputDevice     "cursor" "SendCoreEvents"
    InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
    Mode    0666
EndSection


И прикрепляю Xorg.0.log.

Как быть? Какие действия надо произвести? Что поменять в xorg.conf?
Менял строку
Driver "ati"
на
Driver "intel"
Не помогло.
У вас нет необходимых прав для просмотра вложений в этом сообщении.
Спасибо сказали:
Вернуться к началу
J2ME
Сообщения: 3

Re: Видеокарта intel 82945G

Сообщение J2ME »

Решил проблему. Прописал драйвер i810.
Но с расширением проблемы теперь.
Поначалу всё отображалось, но расширение маленькое, больше 1024 на что-то там не ставилось.
А мне необходимо 1400x1050.
Погуглив, узнал, что мне может помочь утилита 915resolution.
Пошаманив, занес в 3c модэ такие параметры 24 bit и 1400x1050.

Но теперь монитор вообще ничего на экран не выводит. Просто пишет "Вход не поддерживается".
Как бы не менял параметры 915resolution и конфиг xorg.conf. Тоже самое всё время "Вход не поддерживается".

Вот мой xorg.conf

Код: Выделить всё

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Module"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc104"
    Option        "XkbLayout"    "us"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ExplorerPS/2"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
        Identifier  "Card0"
        Driver      "i810"
        VendorName  "Intel Corporation"
        BoardName   "945G Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
EndSection

Section "Monitor"
    Identifier    "Acer AL2017"
    Option        "D-Sub"
#    HorizSync    30-82
#    VertRefresh    56-76
EndSection


Section "Screen"
    Identifier    "Default Screen"
    Device        "Card0"
    Monitor        "Acer AL2017"
    DefaultDepth    24

    SubSection "Display"
        Depth        24
        Modes        "1400x1050"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice     "stylus" "SendCoreEvents"
    InputDevice     "cursor" "SendCoreEvents"
    InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
    Mode    0666
EndSection
Спасибо сказали:
Вернуться к началу

Вернуться в «Видео-карты и мониторы»