Проблемы после Обновления xorg-server 1.6.x (Клава и мышь отказываются работать в иксах)

dobroid · Сообщение **dobroid** » 06.12.2008 17:16

Здравствуйте уважаемые!

Установил Arch. Поставил иксы, они успешно загружаются, но клавиатура и мышь отказываются работать. Уже несколько дней пытаюсь разобраться с проблемой. xorg.conf перековырял весь, ничего не помогает. Помогите советом, какой конфиг поправить, чего скачать/удалить/запустить.

Все что мог погуглил, похожие проблемы были, но решения проблемы так и не нашел.

Спасибо!

Сообщение **(asper** » 06.12.2008 17:34

Плохо искали, проблема наверное из-за перехода Арча на новые Х-ы 7.4 новость
Вот пару ссылок :
http://bbs.archlinux.org/viewtopic.php?id=59922&p=1
http://bbs.archlinux.org/viewtopic.php?id=59963
http://bbs.archlinux.org/viewtopic.php?id=59993&p=1
http://wiki.archlinux.org/index.php/Xorg_input_hotplugging

Я у себя сделал так:
тк времени особо разбираться не было в xorg.conf оставил всё по старинке, только привёл свой xorg.conf к такому виду:

Код: Выделить всё

Section "Files"
#    RgbPath         "/usr/share/X11/rgb"
...
EndSection

Section "ServerFlags"
    ...
    Option "AllowEmptyInput" "False"
    Option "AutoAddDevices" "False"
EndSection

Section "Device"
...
Option "BackingStore" "false"
...
EndSection

Надеюсь вам поможет

ishitori · Сообщение **ishitori** » 06.12.2008 19:09

вот здесь была пара постов на эту тему:
Кеды в арче

dobroid · Сообщение **dobroid** » 06.12.2008 21:16

Огромное спасибо. Я уже в линуксе. Все работает

Vaganto · Сообщение **Vaganto** » 07.12.2008 18:07

Тоже столкнулся с этой проблемой вчера

Решение было найдено за 15 минут на арч вики. Решил всётаки разобраться и сделал как надо через HAL.
Всётаки к новому надо привыкать сразу...
Если будете искать статью на арч вики - ищите английскую. Статья свежая, перевода нету.

Malar · Сообщение **Malar** » 07.12.2008 21:44

Vaganto, поделитесь, пожалуйста, ссылкой

ishitori · Сообщение **ishitori** » 07.12.2008 22:34

Malar писал(а): ↑
07.12.2008 21:44
Vaganto, поделитесь, пожалуйста, ссылкой

не очень-то вы любите читать:

((asper) писал(а):Плохо искали, проблема наверное из-за перехода Арча на новые Х-ы 7.4 новость
Вот пару ссылок :
http://bbs.archlinux.org/viewtopic.php?id=59922&p=1
http://bbs.archlinux.org/viewtopic.php?id=59963
http://bbs.archlinux.org/viewtopic.php?id=59993&p=1
http://wiki.archlinux.org/index.php/Xorg_input_hotplugging

+ в основной статье по xorg написано.

unclegreen · Сообщение **unclegreen** » 27.12.2008 07:03

(asper

Section "Files"
# RgbPath "/usr/share/X11/rgb"
...
EndSection

Section "ServerFlags"
...
Option "AllowEmptyInput" "False"
Option "AutoAddDevices" "False"
EndSection

Section "Device"
...
Option "BackingStore" "false"
...
EndSection

мне помогло, когда я у себя добавил приведённые выше строчки, не могли бы вы разьяснить, что именно они значат, потому что я не совсем понял.
заранее спасибо.

vux · Сообщение **vux** » 11.01.2009 09:16

Обновился и теперь когда запускаются Х-ы клава и миша не работают-какбы не видет драйвера
Методом тыка понял что при установке evdev (xf86-input-evdev) и запуске hal - все начинает работать
но все записи про устройства ввода в xorg.conf игнорируются. Изза этого раскладки я переключить не могу. И вообще хотелось бы не держать hal в памяти только изза этого (((

xorg.conf

Код:

Section "ServerLayout"
	Identifier	 "Layout0"
	Screen	  0  "Screen0" 0 0
	InputDevice	"Keyboard0" "CoreKeyboard"
	InputDevice	"Mouse0" "CorePointer"
	Option "StandbyTime" "100"
	Option "SuspendTime" "100"
	Option "OffTime" "100"
EndSection

Section "Files"
	#RgbPath		 "/usr/lib/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath	 "/usr/share/fonts/misc"
	FontPath	 "/usr/share/fonts/100dpi:unscaled"
	FontPath	 "/usr/share/fonts/75dpi:unscaled"
	FontPath	 "/usr/share/fonts/TTF"
	FontPath	 "/usr/share/fonts/Type1"
	FontPath	 "/usr/share/fonts/cyrillic"
	FontPath	 "/usr/share/fonts/local"
EndSection

Section "Module"
	Load		   "dbe"
	Load		   "extmod"
	Load		   "freetype"
	Load		   "glx"
EndSection

Section "ServerFlags"
	Option		 "Xinerama" "0"
EndSection

Section "InputDevice"
	# generated from default
	Identifier	 "Mouse0"
	Driver		 "mouse"
	Option		 "Protocol" "auto"
	Option		 "Device" "/dev/input/mice"
	Option		 "Emulate3Buttons" "no"
	Option		 "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
	# generated from default
	Identifier	 "Keyboard0"
	Driver		 "kbd"
	Option "XkbLayout" "us,ru(winkeys)"
	Option "XkbOptions" "grp:caps_toggle"
EndSection

Section "Monitor"
	# HorizSync source: edid, VertRefresh source: edid
	Identifier	 "Monitor0"
	VendorName	 "Unknown"
	ModelName	  "Samsung SyncMaster"
	HorizSync	   30.0 - 96.0
	VertRefresh	 50.0 - 160.0
	Option		 "DPMS" "true"
EndSection

Section "Device"
	Identifier	 "Videocard0"
	Driver		 "nv"
	VendorName	 "NVIDIA Corporation"
	BoardName	  "GeForce4 MX 440 with AGP8X"
	Option		 "NoLogo" "true"
	Option		 "DPI" "96 x 96"

EndSection

Section "Screen"
	Identifier	 "Screen0"
	Device		 "Videocard0"
	Monitor		"Monitor0"
	DefaultDepth   24
	Option		 "metamodes" "CRT: 1280x1024_85 +0+0; CRT: nvidia-auto-select +0+0"
	SubSection	 "Display"
		Depth	   24
		Modes	  "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

sirocco · Сообщение **sirocco** » 11.01.2009 11:18

http://wiki.archlinux.org/index.php/Xorg_i..._turn_it_off.3F

vux · Сообщение **vux** » 11.01.2009 11:39

working well !!!

Sergey T · Сообщение **Sergey T** » 28.07.2009 19:44

Поставил на новый ноут Арч. Тоже сабж проявился. В логе пишет, что не найдены модули mouse и kbd.
В /usr/lib/xorg/modules таких модулей естественно не обнаружилось. В папке input есть только какой-то edev. Что там нужно сделать?
ЗЫ
Гуглил, но вразумительного ответа пока ненашел. Английским не владею.

Sleeep · Сообщение **Sleeep** » 28.07.2009 21:30

Сейчас большинство настроек xorg делается через политики HAL.
В xorg.conf я оставил информацию о видеокарте, мониторе и шрифтах, остальное убрал.
Мышь подхватилась автоматом, а для настройки клавиатуры

Код: Выделить всё

# cp /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi /etc/hal/fdi/policy/10-keymap.fdi
# vi /etc/hal/fdi/policy/10-keymap.fdi

Cинтаксис похож на тот, что был в xorg.conf

В /etc/rc.conf нужно добавить hal и dbus, в секцию daemons.

sirocco · Сообщение **sirocco** » 28.07.2009 22:41

Sergey T писал(а): ↑
28.07.2009 19:44
Гуглил, но вразумительного ответа пока ненашел. Английским не владею.

Поиском, к сожалению, тоже. Поищите на этом форуме и на http://archlinux.org.ru/forum/, на много раз уже пережёвывалось.

Sergey T · Сообщение **Sergey T** » 29.07.2009 06:12

sirocco писал(а): ↑
28.07.2009 22:41
Поиском, к сожалению, тоже. Поищите на этом форуме и на http://archlinux.org.ru/forum/, на много раз уже пережёвывалось.

Спасибо, но там я уже был

sirocco · Сообщение **sirocco** » 29.07.2009 17:05

Sergey T писал(а): ↑
29.07.2009 06:12
Спасибо, но там я уже был

Даже и не сомневаюсь, что были. Толку-то?

http://archlinux.org.ru/forum/viewtopic.php?f=8&t=1711

http://archlinux.org.ru/forum/viewtopic.ph...921&p=14774

Jungle · Сообщение **Jungle** » 06.09.2009 01:49

Делал и через hal и через xorg.conf, результат один - пустой чёрный экран. Клавиатура работает, мышь тоже (судя по Xorg.0.log). Как ни извращался - ничего не помогает. Видеокарта втроенная Intel 82815, драйверы xf86-video-intel (legacy с тем же результатом). Если поставить в xorg.conf "vesa" вместо "intel", то чёрный экран сменяется на бегущие полосы. Уже и не знаю что делать.

gr1nd · Сообщение **gr1nd** » 06.09.2009 01:51

Jungle писал(а): ↑
06.09.2009 01:49
Делал и через hal и через xorg.conf, результат один - пустой чёрный экран. Клавиатура работает, мышь тоже (судя по Xorg.0.log). Как ни извращался - ничего не помогает. Видеокарта втроенная Intel 82815, драйверы xf86-video-intel (legacy с тем же результатом). Если поставить в xorg.conf "vesa" вместо "intel", то чёрный экран сменяется на бегущие полосы. Уже и не знаю что делать.

Это когда?Сразу после команды тестировать сконфигуренный Икс?

Jungle · Сообщение **Jungle** » 06.09.2009 14:30

Это когда?Сразу после команды тестировать сконфигуренный Икс?

Без разницы:
- с чистым xorg.conf без hal'а после Xorg -configure;
- с модифицированным xorg.conf (всякие BackingStore, AutoAddDevices и проч) без hal'а;
- с модифицированным xorg.conf c hal'ом;
- просто startx (без xorg.conf)
- startx c hal (без xorg.conf)

Под словами "с/без hal" подразумеваю правку *.fdi

P.S. Помнится, в 2008.06 всё заработало практически без выкрутасов.

sirocco · Сообщение **sirocco** » 06.09.2009 15:10

Jungle писал(а): ↑
06.09.2009 14:30
- startx c hal (без xorg.conf)

Под словами "с/без hal" подразумеваю правку *.fdi

Что там в *.fdi править-то, кроме раскладки?
Что стоит "после" xorg (боксы, гном, кде, ...)?
Что в ~/.xinitrc

Да, для интела лучше бы через KMS

Jungle · Сообщение **Jungle** » 06.09.2009 16:48

sirocco
Стоит xfce

~/.xinitrc

Код: Выделить всё

#!/bin/sh

case "$1" in
# exec gnome-session
# exec startkde
    xfce4)
    exec startxfce4
;;
    icewm)
    exec icewm
;;
    openbox)
    exec openbox
;;
    lxde)
    exec startlxde
;;
       *)
    exec startxfce4
;;
esac

Выяснил следующее. Если после логина сразу запустить X (startx), то загружается нормально, только разрешение выставляется 1600x1200. C xorg.conf - чёрный экран. Вероятно, всё-таки что-то неправильно в xorg.conf. Только что - никто не знает.

Вот лог.

Xorg.0.log

Код: Выделить всё

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux compy 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
Build Date: 04 September 2009  03:37:03PM

    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep  6 20:27:37 2009
(II) Loader magic: 0xec0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:1132:8086:1132 Intel Corporation 82815 Chipset Graphics Controller (CGC) rev 4, Mem @ 0xe0000000/67108864, 0xe4100000/524288
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default intel Device 0"
        Driver    "intel"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default intel Screen 0"
        Device    "Builtin Default intel Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default i810 Device 0"
        Driver    "i810"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default i810 Screen 0"
        Device    "Builtin Default i810 Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default intel Screen 0"
        Screen    "Builtin Default i810 Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/Type1,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) UnloadModule: "i810"
(II) Unloading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Failed to load module "i810" (already loaded, 136140333)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 16/16
(==) intel(0): Depth 16, (==) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel(R) 815 Chipset Video BIOS
(II) intel(0): VESA VBE OEM Software Rev: 4.2
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(R) 815 Chipset
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level 2
(II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
(II) intel(0): VESA VBE DDC read successfully
(II) intel(0): Manufacturer: CTX  Model: 5371  Serial#: 0
(II) intel(0): Year: 2001  Week: 0
(II) intel(0): EDID Version: 1.1
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) intel(0): Signal levels configurable
(II) intel(0): Sync:  Separate  CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 25
(II) intel(0): Gamma: 2.10
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): redX: 0.625 redY: 0.340   greenX: 0.280 greenY: 0.600
(II) intel(0): blueX: 0.151 blueY: 0.070   whiteX: 0.283 whiteY: 0.297
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@87Hz (interlaced)
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 640  vsize 480  refresh: 120  vid: 31793
(II) intel(0): #1: hsize: 800  vsize 600  refresh: 120  vid: 31813
(II) intel(0): #2: hsize: 1024  vsize 768  refresh: 100  vid: 26721
(II) intel(0): #3: hsize: 1152  vsize 864  refresh: 85  vid: 22897
(II) intel(0): #4: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) intel(0): #5: hsize: 1600  vsize 1200  refresh: 65  vid: 17833
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 36.0 MHz   Image Size:  310 x 232 mm
(II) intel(0): h_active: 640  h_sync: 672  h_sync_end 720 h_blank_end 832 h_border: 0
(II) intel(0): v_active: 480  v_sync: 481  v_sync_end 484 v_blanking: 509 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 56.2 MHz   Image Size:  310 x 232 mm
(II) intel(0): h_active: 800  h_sync: 832  h_sync_end 896 h_blank_end 1048 h_border: 0
(II) intel(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking: 631 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 94.5 MHz   Image Size:  310 x 232 mm
(II) intel(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) intel(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
(II) intel(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 86 kHz, PixClock max 180 MHz
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e98715300000000
(II) intel(0):     000b01011d21196ee80ec8a057479926
(II) intel(0):     12484cbfff80317c457c61687159818f
(II) intel(0):     a94501010101100e80c020e01d102030
(II) intel(0):     130036e810000018f91520f830581f20
(II) intel(0):     2040130036e81000001eea2400604100
(II) intel(0):     28303060130036e81000001e000000fd
(II) intel(0):     0032a01e5612000a2020202020200033
(II) intel(0): EDID vendor "CTX", prod id 21361
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0   36.00  640 672 720 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  175.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(--) intel(0): Chipset: "i815"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xE4100000
(II) intel(0): Kernel reported 81920 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 327676k available
(==) intel(0): Will alloc AGP framebuffer: 24576 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): <default monitor>: Using hsync range of 30.00-86.00 kHz
(II) intel(0): <default monitor>: Using vrefresh range of 50.00-160.00 Hz
(II) intel(0): <default monitor>: Using maximum pixel clock of 180.00 MHz
(II) intel(0): Estimated virtual size for aspect ratio 1.3200 is 1600x1200
(II) intel(0): Clock range:   9.50 to 163.00 MHz
(II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (unknown reason)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using driver mode "1024x768" (unknown reason)
(II) intel(0): Not using driver mode "1600x1200" (bad mode clock/interlace/doublescan)
(--) intel(0): Virtual size is 1600x1200 (pitch 1600)
(**) intel(0): *Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(**) intel(0): *Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) intel(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz)
(**) intel(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
(**) intel(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) intel(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) intel(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) intel(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) intel(0): *Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) intel(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz)
(**) intel(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) intel(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(**) intel(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(**) intel(0): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(**) intel(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) intel(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(**) intel(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) intel(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) intel(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) intel(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) intel(0): *Driver mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz
(II) intel(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(**) intel(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) intel(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) intel(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(**) intel(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) intel(0): *Driver mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) intel(0): Modeline "640x480"x85.0   36.00  640 672 720 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) intel(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(**) intel(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(**) intel(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) intel(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(**) intel(0): Display dimensions: (330, 250) mm
(**) intel(0): DPI set to (123, 121)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) intel(0): page flipping disabled
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[B](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i810" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xe0000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0xe4100000
(II) intel(0): [agp] dcacheHandle : 0x0
(II) intel(0): [agp] GART: no dcache memory found
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound depthbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 384 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : d9b000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 162.0 MHz [ 0x19 0x6 0x10 ] [ 27 8 1 ]
(II) intel(0): chose watermark 0x22416000: (tab.freq 162.0)
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
        20 128x128 slots
        4 256x256 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: drmOpenMinor returns 14
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event6"
(II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_variant" "winkeys"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event5"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_variant" "winkeys"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_variant" "winkeys"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_variant" "winkeys"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp"
(II) intel(0): Setting dot clock to 135.0 MHz [ 0x2b 0x6 0x20 ] [ 45 8 2 ]
(II) intel(0): chose watermark 0x22314000: (tab.freq 135.0)

Сообщение **(asper** » 06.09.2009 18:31

Jungle писал(а): ↑
06.09.2009 16:48
Вероятно, всё-таки что-то неправильно в xorg.conf. Только что - никто не знает.

Так выложите уже и свой xorg.conf тогда, может кто чего и скажет.

Jungle · Сообщение **Jungle** » 06.09.2009 20:25

(asper писал(а): ↑
06.09.2009 18:31
Так выложите уже и свой xorg.conf тогда, может кто чего и скажет.

xorg.conf

Код: Выделить всё

Section "ServerLayout"
    Identifier  "X.org Configured"
    Screen  0  "Screen0"  0  0
#    InputDevice  "Mouse0"  "CorePointer"
#    InputDevice  "Keyboard0"  "CoreKeyboard"
EndSection

Section "ServerFlags"
    Option "RandR"  "on"
    Option "AllowEmptyInput"  "false"
#    Option  "AutoAddDevices"  "false"
EndSection

#
# use hal settings
#
#Section "InputDevice"
#    Identifier  "Keyboard0"
#    Driver      "kbd"
#    Option      "XkbLayout"   "us,ru(winkeys)"
#    Option      "XkbOptions"  "grp:ctrl_shift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp"
#EndSection

#Section "InputDevice"
#    Identifier  "Mouse0"
#    Driver      "mouse"
#    Option        "Protocol" "auto"
#    Option        "Device" "/dev/input/mice"
#    Option        "ZAxisMapping" "4 5 6 7"
#EndSection

Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    SubSection  "extmod"
      Option    "omit xfree86-dga"
    EndSubSection
EndSection

Section "Monitor"
#    DisplaySize      330   250    # mm
    Identifier   "Monitor0"
    VendorName   "CTX"
    ModelName    "5371"
    HorizSync    30.0 - 86.0
    VertRefresh  50.0 - 160.0
#    VertRefresh  50.0 - 85.0
    Option  "DPMS"
    Option  "PreferredMode"  "1280x1024"
#    Option  "ModeValidation" "NoEdidModes"
#    Option  "UseEdid" "false"
EndSection

Section "Device"
#    Option  "BackingStore"  "off"
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82815 Chipset Graphics Controller (CGC)"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultDepth    16
    SubSection "Display"
        Depth     16
        Modes "1280x1024" "1024x768" "800x600"
        Viewport   0 0
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes "1280x1024" "1024x768" "800x600"
        Viewport   0 0
#        Virtual    1280 1024
    EndSubSection
EndSection

Section "DRI"
    Mode 0666
EndSection

Jungle · Сообщение **Jungle** » 15.09.2009 07:50

Отбой. Всё нормально. Оказывается, для проверки надо запускать

Код: Выделить всё

X -config config_file -retro

С моим xorg.conf порядок, я его скопировал в /etc/X11 и при загрузке X стартует корректно

sirocco · Сообщение **sirocco** » 28.07.2010 19:43

Пора бы новость того, отцепить? Нехай утонет?

unixforum.org

Проблемы после Обновления xorg-server 1.6.x (Клава и мышь отказываются работать в иксах)

Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x

Re: Проблемы после Обновления xorg-server 1.6.x