Проблемы с мышью (Зависает мышка)

[axad2008]

Здравствуйте. Не знаю даже как объяснить проблему. Сам я новичок в линуксе, а проблема у меня вот такая После 5-10 минут работы за компьютером мышка просто застывает, а система сома по себе работает, как захочу сделать перезагрузку, вот то и система зависает, клава тож зависает, нум лок не отключается, Плизззз помогите

[Max_Sys]

А как Вы узнали, что система продолжает работать после зависания мыши?
Посмотрите логи в /var/log. Что там про железки?
Или попробуйте, например, как-нибудь залогинится к компу по ssh и посмотреть, что напишет dmesg.

[axad2008]

спасибо что ответили Система работает, музыка играет, можно клавиатурой управлять, сворачивать окна ну и т.д. после команды перезагрузка всё зависает.
Вот что выдаёт dmesg:

Код:

Linux version 2.6.27.14-desktop-1mnb (qateam@titan.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Wed Feb 18 03:40:45 EST 2009 Command line: BOOT_IMAGE=linux root=UUID=3f539ebe-075f-406f-a0d7-877f43fb5b56 resume=UUID=c9b19db5-9cb3-49ac-af30-f16c559eaca1 splash=silent vga=788 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000afee0000 (usable) BIOS-e820: 00000000afee0000 - 00000000afee3000 (ACPI NVS) BIOS-e820: 00000000afee3000 - 00000000afef0000 (ACPI data) BIOS-e820: 00000000afef0000 - 00000000aff00000 (reserved) BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.5 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0xafee0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 00afe00000 page 2M 00afe00000 - 00afee0000 page 4k kernel direct mapping tables up to afee0000 @ 10000-15000 last_map_addr: afee0000 end: afee0000 RAMDISK: 37c06000 - 37fefbe1 ACPI: RSDP 000F7520, 0024 (r2 Nvidia) ACPI: XSDT AFEE3100, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: FACP AFEED3C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609] ACPI: DSDT AFEE3280, A0D8 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) ACPI: FACS AFEE0A80, 0040 ACPI: HPET AFEED600, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) ACPI: MCFG AFEED680, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: APIC AFEED500, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD 0) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-00000000afee0000 Bootmem setup node 0 0000000000000000-00000000afee0000 NODE_DATA [0000000000013000 - 0000000000017fff] bootmap [0000000000018000 - 000000000002dfdf] pages 16 (6 early reservations) ==> bootmem [0000000000 - 00afee0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00007f388c] TEXT DATA BSS ==> [0000200000 - 00007f388c] #3 [0037c06000 - 0037fefbe1] RAMDISK ==> [0037c06000 - 0037fefbe1] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] found SMP MP-table at [ffff8800000f5990] 000f5990 [ffffe20000000000-ffffe200027fffff] PMD -> [ffff880001200000-ffff8800039fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000afee0 On node 0 totalpages: 720495 DMA zone: 2299 pages, LIFO batch:0 DMA32 zone: 706715 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfeff0000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) PERCPU: Allocating 51744 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 709014 Policy zone: DMA32 Kernel command line: BOOT_IMAGE=linux root=UUID=3f539ebe-075f-406f-a0d7-877f43fb5b56 resume=UUID=c9b19db5-9cb3-49ac-af30-f16c559eaca1 splash=silent vga=788 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1799.951 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ 40000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Memory: 2830500k/2882432k available (3084k kernel code, 51480k reserved, 1559k data, 540k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.89 BogoMIPS (lpj=1799949) Security Framework initialized AppArmor: AppArmor disabled by boottime parameter Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Hook version: 2.6.27-2.3 2008/08/29 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 00aff00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine Early unpacking initramfs... done Freeing initrd memory: 4006k freed ACPI: Core revision 20080609 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom&#153; 9150e Quad-Core Processor stepping 03 Using local APIC timer interrupts. APIC timer calibration result 12499657 Detected 12.499 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3600.07 BogoMIPS (lpj=1800039) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Phenom&#153; 9150e Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/2 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 3599.97 BogoMIPS (lpj=1799989) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: AMD Phenom&#153; 9150e Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 3599.99 BogoMIPS (lpj=1799999) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 3/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: AMD Phenom&#153; 9150e Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (14399.95 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-3 level CPU groups: 0 1 2 3 domain 1: span 0-3 level NODE groups: 0-3 CPU1 attaching sched-domain: domain 0: span 0-3 level CPU groups: 1 2 3 0 domain 1: span 0-3 level NODE groups: 0-3 CPU2 attaching sched-domain: domain 0: span 0-3 level CPU groups: 2 3 0 1 domain 1: span 0-3 level NODE groups: 0-3 CPU3 attaching sched-domain: domain 0: span 0-3 level CPU groups: 3 0 1 2 domain 1: span 0-3 level NODE groups: 0-3 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 node 0 link 0: io port [9000, ffff] TOM: 00000000c0000000 aka 3072M Fam 10h mmconf [f0000000, f00fffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, efffffff] node 0 link 0: mmio [f4000000, fe02ffff] node 0 link 0: mmio [f0000000, f06fffff] ==> [f0100000, f06fffff] bus: [00,06] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [c0000000, efffffff] bus: 00 index 3 mmio: [f0700000, fcffffffff] bus: 00 index 4 mmio: [f0100000, f06fffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:01.1 reg 10 io port: [ff00, ff3f] PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f] PCI: 0000:00:01.1 reg 24 io port: [1c40, 1c7f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled PCI: 0000:00:01.3 reg 10 32bit mmio: [fdf80000, fdffffff] PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff] pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff] pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled PCI: 0000:00:04.0 reg 10 32bit mmio: [fe02d000, fe02dfff] pci 0000:00:04.0: supports D1 pci 0000:00:04.0: supports D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled PCI: 0000:00:04.1 reg 10 32bit mmio: [fe02c000, fe02c0ff] pci 0000:00:04.1: supports D1 pci 0000:00:04.1: supports D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.1: PME# disabled PCI: 0000:00:06.0 reg 20 io port: [fc00, fc0f] PCI: 0000:00:07.0 reg 10 32bit mmio: [fe020000, fe023fff] pci 0000:00:07.0: PME# supported from D3hot D3cold pci 0000:00:07.0: PME# disabled PCI: 0000:00:09.0 reg 10 io port: [9f0, 9f7] PCI: 0000:00:09.0 reg 14 io port: [bf0, bf3] PCI: 0000:00:09.0 reg 18 io port: [970, 977] PCI: 0000:00:09.0 reg 1c io port: [b70, b73] PCI: 0000:00:09.0 reg 20 io port: [f700, f70f] PCI: 0000:00:09.0 reg 24 32bit mmio: [fe026000, fe027fff] PCI: 0000:00:0a.0 reg 10 32bit mmio: [fe02b000, fe02bfff] PCI: 0000:00:0a.0 reg 14 io port: [f600, f607] PCI: 0000:00:0a.0 reg 18 32bit mmio: [fe02a000, fe02a0ff] PCI: 0000:00:0a.0 reg 1c 32bit mmio: [fe029000, fe02900f] pci 0000:00:0a.0: supports D1 pci 0000:00:0a.0: supports D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:13.0: PME# disabled pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled PCI: 0000:01:0a.0 reg 10 32bit mmio: [fdeff000, fdefffff] pci 0000:01:0a.0: supports D1 pci 0000:01:0a.0: supports D2 pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:0a.0: PME# disabled pci 0000:00:08.0: transparent bridge PCI: bridge 0000:00:08.0 io port: [e000, efff] PCI: bridge 0000:00:08.0 32bit mmio: [fde00000, fdefffff] PCI: bridge 0000:00:08.0 32bit mmio pref: [fdd00000, fddfffff] PCI: 0000:02:00.0 reg 10 32bit mmio: [fb000000, fbffffff] PCI: 0000:02:00.0 reg 14 64bit mmio: [d8000000, dfffffff] PCI: 0000:02:00.0 reg 1c 64bit mmio: [e6000000, e7ffffff] PCI: 0000:02:00.0 reg 24 io port: [dc00, dc7f] PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff] PCI: bridge 0000:00:0b.0 io port: [d000, dfff] PCI: bridge 0000:00:0b.0 32bit mmio: [fb000000, fcffffff] PCI: bridge 0000:00:0b.0 64bit mmio pref: [d8000000, e7ffffff] PCI: bridge 0000:00:10.0 io port: [c000, cfff] PCI: bridge 0000:00:10.0 32bit mmio: [fdc00000, fdcfffff] PCI: bridge 0000:00:10.0 64bit mmio pref: [fdb00000, fdbfffff] PCI: bridge 0000:00:12.0 io port: [b000, bfff] PCI: bridge 0000:00:12.0 32bit mmio: [fda00000, fdafffff] PCI: bridge 0000:00:12.0 64bit mmio pref: [fd900000, fd9fffff] PCI: bridge 0000:00:13.0 io port: [a000, afff] PCI: bridge 0000:00:13.0 32bit mmio: [fd800000, fd8fffff] PCI: bridge 0000:00:13.0 64bit mmio pref: [fd700000, fd7fffff] PCI: bridge 0000:00:14.0 io port: [9000, 9fff] PCI: bridge 0000:00:14.0 32bit mmio: [fd600000, fd6fffff] PCI: bridge 0000:00:14.0 64bit mmio pref: [fd500000, fd5fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE1C] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LU1B] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0 ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0 ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0 ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 Linux Plug and Play Support v0.97 © Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:parse DMAR table failure. hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 ACPI: RTC can wake from S4 system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1080-0x10ff has been reserved system 00:01: ioport range 0x1400-0x147f has been reserved system 00:01: ioport range 0x1480-0x14ff has been reserved system 00:01: ioport range 0x1800-0x187f has been reserved system 00:01: ioport range 0x1880-0x18ff has been reserved system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved system 00:01: iomem range 0xb0000000-0xbfffffff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:0b: iomem range 0xcd000-0xcffff has been reserved system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved system 00:0b: iomem range 0xfc000-0xfffff could not be reserved system 00:0b: iomem range 0xfeff0000-0xfeff00ff could not be reserved system 00:0b: iomem range 0xafee0000-0xafefffff could not be reserved system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0x100000-0xafedffff could not be reserved system 00:0b: iomem range 0xafff0000-0xbffeffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 pci 0000:00:08.0: IO window: 0xe000-0xefff pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:08.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0b.0: IO window: 0xd000-0xdfff pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 pci 0000:00:10.0: IO window: 0xc000-0xcfff pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:10.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff pci 0000:00:12.0: PCI bridge, secondary bus 0000:04 pci 0000:00:12.0: IO window: 0xb000-0xbfff pci 0000:00:12.0: MEM window: 0xfda00000-0xfdafffff pci 0000:00:12.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff pci 0000:00:13.0: PCI bridge, secondary bus 0000:05 pci 0000:00:13.0: IO window: 0xa000-0xafff pci 0000:00:13.0: MEM window: 0xfd800000-0xfd8fffff pci 0000:00:13.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff pci 0000:00:14.0: PCI bridge, secondary bus 0000:06 pci 0000:00:14.0: IO window: 0x9000-0x9fff pci 0000:00:14.0: MEM window: 0xfd600000-0xfd6fffff pci 0000:00:14.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff pci 0000:00:08.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16 pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:10.0: setting latency timer to 64 ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16 pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:12.0: setting latency timer to 64 ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16 pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:13.0: setting latency timer to 64 ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16 pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:14.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [e000, efff] bus: 01 index 1 mmio: [fde00000, fdefffff] bus: 01 index 2 mmio: [fdd00000, fddfffff] bus: 01 index 3 io port: [0, ffff] bus: 01 index 4 mmio: [0, ffffffffffffffff] bus: 02 index 0 io port: [d000, dfff] bus: 02 index 1 mmio: [fb000000, fcffffff] bus: 02 index 2 mmio: [d8000000, e7ffffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [c000, cfff] bus: 03 index 1 mmio: [fdc00000, fdcfffff] bus: 03 index 2 mmio: [fdb00000, fdbfffff] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [b000, bfff] bus: 04 index 1 mmio: [fda00000, fdafffff] bus: 04 index 2 mmio: [fd900000, fd9fffff] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 io port: [a000, afff] bus: 05 index 1 mmio: [fd800000, fd8fffff] bus: 05 index 2 mmio: [fd700000, fd7fffff] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 io port: [9000, 9fff] bus: 06 index 1 mmio: [fd600000, fd6fffff] bus: 06 index 2 mmio: [fd500000, fd5fffff] bus: 06 index 3 mmio: [0, 0] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 audit: initializing netlink socket (disabled) type=2000 audit(1235514499.827:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 5536 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:07.0: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0a.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:12.0: Enabling HT MSI Mapping pci 0000:00:13.0: Enabling HT MSI Mapping pci 0000:00:14.0: Enabling HT MSI Mapping pci 0000:02:00.0: Boot video device pcieport-driver 0000:00:10.0: setting latency timer to 64 pcieport-driver 0000:00:10.0: found MSI capability pci_express 0000:00:10.0:pcie00: allocate port service pcieport-driver 0000:00:12.0: setting latency timer to 64 pcieport-driver 0000:00:12.0: found MSI capability pci_express 0000:00:12.0:pcie00: allocate port service pcieport-driver 0000:00:13.0: setting latency timer to 64 pcieport-driver 0000:00:13.0: found MSI capability pci_express 0000:00:13.0:pcie00: allocate port service pcieport-driver 0000:00:14.0: setting latency timer to 64 pcieport-driver 0000:00:14.0: found MSI capability pci_express 0000:00:14.0:pcie00: allocate port service vesafb: framebuffer at 0xe7000000, mapped to 0xffffc20005100000, using 1875k, total 14336k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device hpet_resources: 0xfeff0000 is busy Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 540k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.14-desktop-1mnb ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 22 ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:04.1: setting latency timer to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: debug port 1 ehci_hcd 0000:00:04.1: cache line size of 64 is not supported ehci_hcd 0000:00:04.1: irq 22, io mem 0xfe02c000 usb 1-5: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb 1-5: configuration #1 chosen from 1 choice usb 1-5: New USB device found, idVendor=058f, idProduct=6362 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: Mass Storage Device usb 1-5: Manufacturer: Generic usb 1-5: SerialNumber: 058F312D81B usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.14-desktop-1mnb ehci_hcd usb usb2: SerialNumber: 0000:00:04.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 21 ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.14-desktop-1mnb ohci_hcd usb usb3: SerialNumber: 0000:00:02.0 ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 20 ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:04.0: setting latency timer to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:04.0: irq 20, io mem 0xfe02d000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.14-desktop-1mnb ohci_hcd usb usb4: SerialNumber: 0000:00:04.0 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. ahci 0000:00:09.0: version 3.0 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio ahci 0000:00:09.0: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 23 ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 23 ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 23 ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 23 ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 23 ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 23 usb 4-1: new low speed USB device using ohci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 4-1: New USB device found, idVendor=15d9, idProduct=0a33 usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-1: Product: USB Mouse ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD161HJ GF10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk pata_amd 0000:00:06.0: version 0.3.10 pata_amd 0000:00:06.0: setting latency timer to 64 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 ata7.01: ATAPI: ATAPI DVD A DH20A4P, 9P53, max UDMA/66 ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (600:30:0x1c) ata7.01: limited to UDMA/33 due to 40-wire cable ata7.01: configured for UDMA/33 ata8: port disabled. ignoring. isa bounce pool size: 16 pages scsi 6:0:1:0: CD-ROM ATAPI DVD A DH20A4P 9P53 PQ: 0 ANSI: 5 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ohci1394 0000:01:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[8/8] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000134d29b] EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda6: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 254713 EXT3-fs: sda6: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. TomoyoLinux Mandatory Access Control disabled by default. You need to install ccs-tools if you want to enable it. Initializing USB Mass Storage driver... scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 6:0:1:0: Attached scsi generic sg1 type 5 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:1:0: Attached scsi CD-ROM sr0 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, hpet irqs input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 processor ACPI0007:02: registered as cooling_device2 input: Power Button (CM) as /class/input/input3 processor ACPI0007:03: registered as cooling_device3 ACPI: Power Button (CM) [PWRB] ACPI: WMI: Mapper loaded ACPI: Expecting a [Reference] package element, found type 0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) fan PNP0C0B:00: registered as cooling_device4 ACPI: Fan [FAN] (on) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:0a.0: setting latency timer to 64 input: PC Speaker as /class/input/input4 usbcore: registered new interface driver hiddev input: USB Mouse as /class/input/input5 input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:04.0-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1f:c6:73:83:a1 forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3 ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:07.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EXT3 FS on sda6, internal journal scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 8:0:0:0: [sdb] Attached SCSI removable disk sd 8:0:0:0: Attached scsi generic sg2 type 0 scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 8:0:0:1: [sdc] Attached SCSI removable disk sd 8:0:0:1: Attached scsi generic sg3 type 0 scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 8:0:0:2: [sdd] Attached SCSI removable disk sd 8:0:0:2: Attached scsi generic sg4 type 0 scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 8:0:0:3: [sde] Attached SCSI removable disk sd 8:0:0:3: Attached scsi generic sg5 type 0 usb-storage: device scan complete kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) loop: module loaded Adding 4088500k swap on /dev/sda7. Priority:-1 extents:1 across:4088500k NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20 nvidia 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) -> IRQ 20 nvidia 0000:02:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.70 Wed Aug 27 12:46:19 PDT 2008 ip_tables: © 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. ClusterIP Version 0.8 loaded successfully eth0: no IPv6 routers present ip6_tables: © 2000-2006 Netfilter Core Team netfilter PSD loaded - © astaro AG IFWLOG: register target

[Max_Sys]

А виснут иксы или ядро (хотя, скорее всего X)?
Может покрутить настройки xorg.conf... Например использовать evdev.