-- Debian 5.0 Lenny i386, uname -a такое:
Код: Выделить всё
askinfra@infra:~$ uname -a
Linux infra 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux
и рабочая среда Gnome 2.22.3
-- WinXP Home SP3 32-bit
Железо:
-- сист.плата Intel D865GBF(L) BIOS P25
-- монитор NEC MultiSync 90GX2 Pro (внутри USB-хаб)
-- флешка Kingston DataTraveller II 1Gb
-- флешка Transcend JF V60 2Gb
Проблема: на Дебиане при втыкании флешки иногда не монтирует, по нескольку секунд моргает светодиод на флешке и в dmesg == ошибки, см ниже, иногда перестает моргать иногда моргает пока не вынешь флэшку.
Код: Выделить всё
infra:~# dmesg | tail -n 100
[12949.437211] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12949.439442] sd 20:0:0:0: [sdf] Write Protect is off
[12949.439450] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12949.439456] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12949.441208] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12949.441208] sd 20:0:0:0: [sdf] Write Protect is off
[12949.441208] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12949.441208] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12949.441208] sdf: sdf1
[12949.516247] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12949.713713] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12949.908838] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12950.004577] end_request: I/O error, dev sdf, sector 64
[12950.039196] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12950.039196] sd 20:0:0:0: [sdf] Write Protect is off
[12950.039196] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12950.039196] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12950.039196] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12950.039196] sd 20:0:0:0: [sdf] Write Protect is off
[12950.039196] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12950.039196] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12950.039196] sdf: sdf1
[12950.336929] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12950.604892] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12950.818411] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12951.012509] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12951.116739] end_request: I/O error, dev sdf, sector 4003520
[12951.118137] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12951.126135] sd 20:0:0:0: [sdf] Write Protect is off
[12951.126135] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12951.126135] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12951.211426] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12951.398009] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12951.571010] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12951.670145] end_request: I/O error, dev sdf, sector 0
[12951.670145] __ratelimit: 145 messages suppressed
[12951.670145] Buffer I/O error on device sdf, logical block 0
[12951.765165] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12951.950327] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12952.139697] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12952.246168] end_request: I/O error, dev sdf, sector 8
[12952.246168] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12952.246168] sd 20:0:0:0: [sdf] Write Protect is off
[12952.246168] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12952.246168] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12952.270165] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12952.274164] sd 20:0:0:0: [sdf] Write Protect is off
[12952.274164] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12952.274164] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12952.274164] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12952.274240] sd 20:0:0:0: [sdf] Write Protect is off
[12952.274240] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12952.274240] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12952.274240] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12952.549070] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12952.720564] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12952.824554] end_request: I/O error, dev sdf, sector 0
[12952.824786] ldm_validate_partition_table(): Disk read failed.
[12952.824786] Dev sdf: unable to read RDB block 0
[12952.824786] unable to read partition table
[12952.829836] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12952.829836] sd 20:0:0:0: [sdf] Write Protect is off
[12952.829836] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12952.829836] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12952.829836] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12952.833839] sd 20:0:0:0: [sdf] Write Protect is off
[12952.833839] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12952.833839] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12952.833839] sdf: sdf1
[12952.994000] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12953.171589] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12953.382689] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12953.488190] end_request: I/O error, dev sdf, sector 104
[12953.566216] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12953.711280] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12953.713280] sd 20:0:0:0: [sdf] Write Protect is off
[12953.713280] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12953.713280] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12953.717280] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12953.717280] sd 20:0:0:0: [sdf] Write Protect is off
[12953.717280] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12953.717280] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12953.717280] sdf: sdf1
[12953.986873] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12954.185849] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12954.375025] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12954.476778] end_request: I/O error, dev sdf, sector 32
[12954.527961] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12954.527961] sd 20:0:0:0: [sdf] Write Protect is off
[12954.527961] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12954.527961] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12954.530442] sd 20:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[12954.531959] sd 20:0:0:0: [sdf] Write Protect is off
[12954.531959] sd 20:0:0:0: [sdf] Mode Sense: 03 00 00 00
[12954.531959] sd 20:0:0:0: [sdf] Assuming drive cache: write through
[12954.531959] sdf: sdf1
[12954.647251] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12954.930905] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12955.115625] usb 5-1.1: reset high speed USB device using ehci_hcd and address 26
[12955.521924] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[13633.068530] sd 35:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13633.068530] sd 35:0:0:0: [sdf] Write Protect is off
[13633.068530] sd 35:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13633.068530] sd 35:0:0:0: [sdf] Assuming drive cache: write through
[13633.072534] sd 35:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13633.072534] sd 35:0:0:0: [sdf] Write Protect is off
[13633.072534] sd 35:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13633.072534] sd 35:0:0:0: [sdf] Assuming drive cache: write through
[13633.072534] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 41
[13633.309910] usb 5-1.1: reset high speed USB device using ehci_hcd and address 41
[13633.494575] usb 5-1.1: reset high speed USB device using ehci_hcd and address 41
[13633.592168] end_request: I/O error, dev sdf, sector 0
[13633.593166] ldm_validate_partition_table(): Disk read failed.
[13633.593166] Dev sdf: unable to read RDB block 0
[13633.593232] unable to read partition table
infra:~# dmesg | tail -n 100
[13801.316598] Dev sdf: unable to read RDB block 0
[13801.316598] unable to read partition table
[13802.840017] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13802.840017] sd 39:0:0:0: [sdf] Write Protect is off
[13802.840017] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13802.840017] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13802.840017] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13802.840017] sd 39:0:0:0: [sdf] Write Protect is off
[13802.840017] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13802.840017] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13802.840017] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13803.112024] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13803.314110] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13803.410519] end_request: I/O error, dev sdf, sector 0
[13803.410519] ldm_validate_partition_table(): Disk read failed.
[13803.410519] Dev sdf: unable to read RDB block 0
[13803.410519] unable to read partition table
[13805.025620] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13805.025620] sd 39:0:0:0: [sdf] Write Protect is off
[13805.025620] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13805.025620] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13805.029802] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13805.032836] sd 39:0:0:0: [sdf] Write Protect is off
[13805.032844] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13805.032849] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13805.032856] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13805.238318] sdf1
[13805.355468] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13805.556450] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13805.766120] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13805.862294] end_request: I/O error, dev sdf, sector 8
[13805.862306] __ratelimit: 27 messages suppressed
[13805.862312] Buffer I/O error on device sdf, logical block 1
[13805.916518] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13805.916518] sd 39:0:0:0: [sdf] Write Protect is off
[13805.916518] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13805.916518] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13805.916518] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13805.918899] sd 39:0:0:0: [sdf] Write Protect is off
[13805.918907] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13805.918914] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13805.918922] sdf: sdf1
[13806.089653] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13806.269068] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13806.544836] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13806.774440] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13806.960839] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.140949] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.235383] end_request: I/O error, dev sdf, sector 344
[13807.334885] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.527198] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.697940] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.798648] end_request: I/O error, dev sdf, sector 512
[13807.799986] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13807.799986] sd 39:0:0:0: [sdf] Write Protect is off
[13807.799986] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13807.799986] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13807.803987] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13807.803987] sd 39:0:0:0: [sdf] Write Protect is off
[13807.803987] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13807.803987] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13807.803987] sdf:<2>ldm_validate_partition_table(): Disk read failed.
[13807.803987] Dev sdf: unable to read RDB block 0
[13807.803987] unable to read partition table
[13807.816045] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13807.818374] sd 39:0:0:0: [sdf] Write Protect is off
[13807.818381] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13807.818387] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13807.820043] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13807.820043] sd 39:0:0:0: [sdf] Write Protect is off
[13807.820043] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13807.820043] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13807.820043] sdf: sdf1
[13807.948979] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13808.160465] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13808.332836] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13808.428975] end_request: I/O error, dev sdf, sector 4003518
[13808.509177] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13808.511076] sd 39:0:0:0: [sdf] Write Protect is off
[13808.511076] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13808.511076] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13808.511076] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13808.514046] sd 39:0:0:0: [sdf] Write Protect is off
[13808.514046] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13808.514046] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13808.514046] sdf: sdf1
[13808.796586] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13808.988729] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13809.165931] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13809.266502] end_request: I/O error, dev sdf, sector 96
[13809.307754] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13809.311764] sd 39:0:0:0: [sdf] Write Protect is off
[13809.311764] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13809.311764] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13809.319752] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13809.326282] sd 39:0:0:0: [sdf] Write Protect is off
[13809.326290] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13809.326296] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13809.326305] sdf: sdf1
[13809.586163] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
infra:~# dmesg | tail -n 100
[13801.316598] Dev sdf: unable to read RDB block 0
[13801.316598] unable to read partition table
[13802.840017] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13802.840017] sd 39:0:0:0: [sdf] Write Protect is off
[13802.840017] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13802.840017] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13802.840017] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13802.840017] sd 39:0:0:0: [sdf] Write Protect is off
[13802.840017] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13802.840017] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13802.840017] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13803.112024] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13803.314110] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13803.410519] end_request: I/O error, dev sdf, sector 0
[13803.410519] ldm_validate_partition_table(): Disk read failed.
[13803.410519] Dev sdf: unable to read RDB block 0
[13803.410519] unable to read partition table
[13805.025620] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13805.025620] sd 39:0:0:0: [sdf] Write Protect is off
[13805.025620] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13805.025620] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13805.029802] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13805.032836] sd 39:0:0:0: [sdf] Write Protect is off
[13805.032844] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13805.032849] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13805.032856] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13805.238318] sdf1
[13805.355468] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13805.556450] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13805.766120] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13805.862294] end_request: I/O error, dev sdf, sector 8
[13805.862306] __ratelimit: 27 messages suppressed
[13805.862312] Buffer I/O error on device sdf, logical block 1
[13805.916518] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13805.916518] sd 39:0:0:0: [sdf] Write Protect is off
[13805.916518] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13805.916518] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13805.916518] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13805.918899] sd 39:0:0:0: [sdf] Write Protect is off
[13805.918907] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13805.918914] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13805.918922] sdf: sdf1
[13806.089653] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13806.269068] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13806.544836] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13806.774440] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13806.960839] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.140949] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.235383] end_request: I/O error, dev sdf, sector 344
[13807.334885] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.527198] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.697940] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13807.798648] end_request: I/O error, dev sdf, sector 512
[13807.799986] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13807.799986] sd 39:0:0:0: [sdf] Write Protect is off
[13807.799986] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13807.799986] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13807.803987] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13807.803987] sd 39:0:0:0: [sdf] Write Protect is off
[13807.803987] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13807.803987] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13807.803987] sdf:<2>ldm_validate_partition_table(): Disk read failed.
[13807.803987] Dev sdf: unable to read RDB block 0
[13807.803987] unable to read partition table
[13807.816045] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13807.818374] sd 39:0:0:0: [sdf] Write Protect is off
[13807.818381] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13807.818387] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13807.820043] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13807.820043] sd 39:0:0:0: [sdf] Write Protect is off
[13807.820043] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13807.820043] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13807.820043] sdf: sdf1
[13807.948979] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13808.160465] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13808.332836] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13808.428975] end_request: I/O error, dev sdf, sector 4003518
[13808.509177] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13808.511076] sd 39:0:0:0: [sdf] Write Protect is off
[13808.511076] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13808.511076] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13808.511076] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13808.514046] sd 39:0:0:0: [sdf] Write Protect is off
[13808.514046] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13808.514046] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13808.514046] sdf: sdf1
[13808.796586] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13808.988729] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13809.165931] usb 5-1.1: reset high speed USB device using ehci_hcd and address 45
[13809.266502] end_request: I/O error, dev sdf, sector 96
[13809.307754] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13809.311764] sd 39:0:0:0: [sdf] Write Protect is off
[13809.311764] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13809.311764] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13809.319752] sd 39:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[13809.326282] sd 39:0:0:0: [sdf] Write Protect is off
[13809.326290] sd 39:0:0:0: [sdf] Mode Sense: 03 00 00 00
[13809.326296] sd 39:0:0:0: [sdf] Assuming drive cache: write through
[13809.326305] sdf: sdf1
[13809.586163] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[14361.449261] scsi 54:0:0:0: Direct-Access JetFlash TS2GJFV60 8.07 PQ: 0 ANSI: 2
[14361.457312] sd 54:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14361.457312] sd 54:0:0:0: [sdf] Write Protect is off
[14361.457312] sd 54:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14361.457312] sd 54:0:0:0: [sdf] Assuming drive cache: write through
[14361.461270] sd 54:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14361.461270] sd 54:0:0:0: [sdf] Write Protect is off
[14361.461270] sd 54:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14361.461270] sd 54:0:0:0: [sdf] Assuming drive cache: write through
[14361.461270] sdf: sdf1
[14361.493267] sd 54:0:0:0: [sdf] Attached SCSI removable disk
[14509.512795] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14509.726050] sdf1
[14509.833164] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14510.023413] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14510.227350] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14510.325121] end_request: I/O error, dev sdf, sector 4005760
[14510.334600] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14510.337015] sd 56:0:0:0: [sdf] Write Protect is off
[14510.337024] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14510.337030] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14510.338419] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14510.338419] sd 56:0:0:0: [sdf] Write Protect is off
[14510.338419] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14510.338419] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14510.338419] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14510.608652] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14510.792493] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14510.889980] end_request: I/O error, dev sdf, sector 0
[14510.889978] ldm_validate_partition_table(): Disk read failed.
[14510.889979] Dev sdf: unable to read RDB block 0
[14510.889979] unable to read partition table
[14511.644122] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14511.644122] sd 56:0:0:0: [sdf] Write Protect is off
[14511.644122] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14511.644122] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14511.644122] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14511.648125] sd 56:0:0:0: [sdf] Write Protect is off
[14511.648125] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14511.648125] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14511.648125] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14511.915812] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14512.106255] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14512.212868] end_request: I/O error, dev sdf, sector 0
[14512.212879] __ratelimit: 51 messages suppressed
[14512.212886] Buffer I/O error on device sdf, logical block 0
[14512.212841] ldm_validate_partition_table(): Disk read failed.
[14512.212841] Dev sdf: unable to read RDB block 0
[14512.212841] unable to read partition table
[14513.807563] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14513.807632] sd 56:0:0:0: [sdf] Write Protect is off
[14513.807642] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14513.807647] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14513.811567] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14513.811567] sd 56:0:0:0: [sdf] Write Protect is off
[14513.811567] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14513.811567] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14513.811567] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14514.089016] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14514.285024] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14514.387115] end_request: I/O error, dev sdf, sector 0
[14514.387253] ldm_validate_partition_table(): Disk read failed.
[14514.387306] Dev sdf: unable to read RDB block 0
[14514.387315] unable to read partition table
[14515.980127] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14515.980127] sd 56:0:0:0: [sdf] Write Protect is off
[14515.980127] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14515.980127] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14515.980127] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14515.988134] sd 56:0:0:0: [sdf] Write Protect is off
[14515.988134] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14515.988134] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14515.988134] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14516.258451] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14516.443334] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14516.538987] end_request: I/O error, dev sdf, sector 0
[14516.541113] ldm_validate_partition_table(): Disk read failed.
[14516.541113] Dev sdf: unable to read RDB block 0
[14516.541113] unable to read partition table
[14518.147242] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14518.147242] sd 56:0:0:0: [sdf] Write Protect is off
[14518.147242] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14518.147242] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14518.151243] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14518.151243] sd 56:0:0:0: [sdf] Write Protect is off
[14518.151243] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14518.151243] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14518.151243] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14518.422193] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14518.597897] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14518.693888] end_request: I/O error, dev sdf, sector 0
[14518.693900] __ratelimit: 41 messages suppressed
[14518.693906] Buffer I/O error on device sdf, logical block 0
[14518.695976] ldm_validate_partition_table(): Disk read failed.
[14518.695976] Dev sdf: unable to read RDB block 0
[14518.695976] unable to read partition table
[14520.263744] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14520.263744] sd 56:0:0:0: [sdf] Write Protect is off
[14520.263744] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14520.263744] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14520.267747] sd 56:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14520.271768] sd 56:0:0:0: [sdf] Write Protect is off
[14520.271778] sd 56:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14520.271783] sd 56:0:0:0: [sdf] Assuming drive cache: write through
[14520.271790] sdf:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14520.550620] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14520.741356] usb 5-1.1: reset high speed USB device using ehci_hcd and address 63
[14520.833894] end_request: I/O error, dev sdf, sector 0
[14520.833894] ldm_validate_partition_table(): Disk read failed.
[14520.833894] Dev sdf: unable to read RDB block 0
[14520.833894] unable to read partition table
[14684.839564] usb-storage: device scan complete
[14684.841538] scsi 61:0:0:0: Direct-Access JetFlash TS2GJFV60 8.07 PQ: 0 ANSI: 2
[14684.842536] sd 61:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14684.842673] sd 61:0:0:0: [sdf] Write Protect is off
[14684.842673] sd 61:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14684.842673] sd 61:0:0:0: [sdf] Assuming drive cache: write through
[14684.846537] sd 61:0:0:0: [sdf] 4005888 512-byte hardware sectors (2051 MB)
[14684.846537] sd 61:0:0:0: [sdf] Write Protect is off
[14684.846537] sd 61:0:0:0: [sdf] Mode Sense: 03 00 00 00
[14684.846537] sd 61:0:0:0: [sdf] Assuming drive cache: write through
[14684.846537] sdf: sdf1
[14684.886205] sd 61:0:0:0: [sdf] Attached SCSI removable disk
[15256.887034] usb-storage: device scan complete
[15256.887034] scsi 72:0:0:0: Direct-Access JetFlash TS2GJFV60 8.07 PQ: 0 ANSI: 2
[15256.887091] sd 72:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15256.887091] sd 72:0:0:0: [sdg] Write Protect is off
[15256.887091] sd 72:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15256.887091] sd 72:0:0:0: [sdg] Assuming drive cache: write through
[15256.887091] sd 72:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15256.887091] sd 72:0:0:0: [sdg] Write Protect is off
[15256.887091] sd 72:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15256.887091] sd 72:0:0:0: [sdg] Assuming drive cache: write through
[15256.887091] sdg: sdg1
[15256.928315] sd 72:0:0:0: [sdg] Attached SCSI removable disk
infra:~# dmesg | tail -n 100
[15399.190066] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15399.364058] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15399.472535] end_request: I/O error, dev sdg, sector 0
[15399.472537] ldm_validate_partition_table(): Disk read failed.
[15399.472537] Dev sdg: unable to read RDB block 0
[15399.472537] unable to read partition table
[15399.476539] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15399.476539] sd 75:0:0:0: [sdg] Write Protect is off
[15399.476539] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15399.476539] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15399.480538] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15399.480538] sd 75:0:0:0: [sdg] Write Protect is off
[15399.480538] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15399.480538] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15399.480538] sdg:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15399.734918] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15399.904427] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15400.002129] end_request: I/O error, dev sdg, sector 0
[15400.003062] ldm_validate_partition_table(): Disk read failed.
[15400.003062] Dev sdg: unable to read RDB block 0
[15400.003062] unable to read partition table
[15401.041635] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15401.041635] sd 75:0:0:0: [sdg] Write Protect is off
[15401.041635] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15401.041635] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15401.041635] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15401.041635] sd 75:0:0:0: [sdg] Write Protect is off
[15401.041635] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15401.041635] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15401.041635] sdg:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15401.310242] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15401.490031] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15401.586278] end_request: I/O error, dev sdg, sector 0
[15401.586290] __ratelimit: 63 messages suppressed
[15401.586296] Buffer I/O error on device sdg, logical block 0
[15401.586278] ldm_validate_partition_table(): Disk read failed.
[15401.586278] Dev sdg: unable to read RDB block 0
[15401.586278] unable to read partition table
[15403.203204] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15403.203204] sd 75:0:0:0: [sdg] Write Protect is off
[15403.203204] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15403.203204] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15403.203204] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15403.203204] sd 75:0:0:0: [sdg] Write Protect is off
[15403.203204] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15403.203204] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15403.203204] sdg:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15403.473670] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15403.661337] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15403.764427] end_request: I/O error, dev sdg, sector 0
[15403.765429] ldm_validate_partition_table(): Disk read failed.
[15403.765429] Dev sdg: unable to read RDB block 0
[15403.765429] unable to read partition table
[15405.365161] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15405.365161] sd 75:0:0:0: [sdg] Write Protect is off
[15405.365161] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15405.365161] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15405.365161] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15405.365161] sd 75:0:0:0: [sdg] Write Protect is off
[15405.365161] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15405.365161] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15405.365161] sdg:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15405.627361] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15405.790837] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15405.884550] end_request: I/O error, dev sdg, sector 0
[15405.884550] ldm_validate_partition_table(): Disk read failed.
[15405.884550] Dev sdg: unable to read RDB block 0
[15405.884550] unable to read partition table
[15407.487203] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15407.487203] sd 75:0:0:0: [sdg] Write Protect is off
[15407.487203] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15407.487203] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15407.487861] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15407.491205] sd 75:0:0:0: [sdg] Write Protect is off
[15407.491205] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15407.491205] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15407.491205] sdg:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15407.774408] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15407.953591] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15408.050816] end_request: I/O error, dev sdg, sector 0
[15408.050816] __ratelimit: 41 messages suppressed
[15408.050816] Buffer I/O error on device sdg, logical block 0
[15408.053370] ldm_validate_partition_table(): Disk read failed.
[15408.053370] Dev sdg: unable to read RDB block 0
[15408.053370] unable to read partition table
[15409.647656] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15409.647656] sd 75:0:0:0: [sdg] Write Protect is off
[15409.647656] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15409.647656] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15409.647656] sd 75:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[15409.651656] sd 75:0:0:0: [sdg] Write Protect is off
[15409.651656] sd 75:0:0:0: [sdg] Mode Sense: 03 00 00 00
[15409.651656] sd 75:0:0:0: [sdg] Assuming drive cache: write through
[15409.651656] sdg:<6>usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15409.911846] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15410.085088] usb 5-1.1: reset high speed USB device using ehci_hcd and address 82
[15410.187803] end_request: I/O error, dev sdg, sector 0
[15410.187803] ldm_validate_partition_table(): Disk read failed.
[15410.187803] Dev sdg: unable to read RDB block 0
[15410.187803] unable to read partition table
[16025.597726] scsi 90:0:0:0: Direct-Access JetFlash TS2GJFV60 8.07 PQ: 0 ANSI: 2
[16025.597726] sd 90:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[16025.600002] sd 90:0:0:0: [sdg] Write Protect is off
[16025.600013] sd 90:0:0:0: [sdg] Mode Sense: 03 00 00 00
[16025.600018] sd 90:0:0:0: [sdg] Assuming drive cache: write through
[16025.601732] sd 90:0:0:0: [sdg] 4005888 512-byte hardware sectors (2051 MB)
[16025.601732] sd 90:0:0:0: [sdg] Write Protect is off
[16025.601732] sd 90:0:0:0: [sdg] Mode Sense: 03 00 00 00
[16025.601732] sd 90:0:0:0: [sdg] Assuming drive cache: write through
[16025.601732] sdg: sdg1
[16025.640886] sd 90:0:0:0: [sdg] Attached SCSI removable disk
[ 731.556298] usb 5-1.1: new high speed USB device using ehci_hcd and address 34
[ 731.706270] usb 5-1.1: unable to read config index 0 descriptor/all
[ 731.706270] usb 5-1.1: can't read configurations, error -32
[ 731.777374] usb 5-1.1: new high speed USB device using ehci_hcd and address 35
[ 731.922364] usb 5-1.1: device descriptor read/64, error -32
[ 732.098341] usb 5-1.1: device descriptor read/64, error -32
[ 732.278100] usb 5-1.1: new high speed USB device using ehci_hcd and address 36
[ 732.682602] usb 5-1.1: device not accepting address 36, error -32
[ 732.758417] usb 5-1.1: new high speed USB device using ehci_hcd and address 37
[ 733.333521] usb 5-1.1: device not accepting address 37, error -32
[ 733.333597] hub 5-1:1.0: unable to enumerate USB device on port 1
infra:~# lsusb
Bus 004 Device 002: ID 05e3:070e Genesys Logic, Inc. X-PRO CR20xA USB 2.0 Internal Card Reader
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[ 999.087209] usb-storage: device scan complete
[ 999.107225] scsi 36:0:0:0: Direct-Access JetFlash TS2GJFV60 8.07 PQ: 0 ANSI: 2
[ 999.112209] sd 36:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 999.112330] sd 36:0:0:0: [sdb] Write Protect is off
[ 999.112330] sd 36:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 999.112330] sd 36:0:0:0: [sdb] Assuming drive cache: write through
[ 999.116210] sd 36:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 999.116210] sd 36:0:0:0: [sdb] Write Protect is off
[ 999.116210] sd 36:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 999.116210] sd 36:0:0:0: [sdb] Assuming drive cache: write through
[ 999.116210] sdb: sdb1
[ 999.148301] sd 36:0:0:0: [sdb] Attached SCSI removable disk
Статистику набирал на Transcend JetFlash V60, но пара втыканий Kingston-а показала, что проблема не в конкретной флешке.
В Дебиане == втыкал 50 раз, дальше уже неинтересно стало. проблемы были замечены в 3, 15, 19, 23, 33, 39, 40, 41, 43, 46 и 49-м втыкании
В WinXP == все шоколадно. 100раз вынимал-втыкал == ни одного сбоя, открывается в проводнике без проблем
Также втыкал Transcend в другую систему == EeePC 901 с ОС XANDROS (`uname -r` == 2.6.21.4-eeepc)== там тоже все ок, проблем нет, из 100 циклов вынимания-втыкания ни один не вылетел с ошибкой, открывалось ок.
Кто сталкивался с проблемой и в чем может быть дело?