Модератор: Модераторы разделов
/etc/init.d/halt добавляем строку "modprobe -r snd-hda-intel" в тело функции do_stop, как показано ниже:
....
do_stop () {
modprobe -r snd-hda-intel
if [ "$INIT_HALT" = "" ]
Код: Выделить всё
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 2210.614 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2048304k/2097088k available (3112k kernel code, 48396k reserved, 1575k data, 536k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4421.22 BogoMIPS (lpj=8842456)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU 0/0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004018] ACPI: Core revision 20080609
[ 0.005494] ACPI: Checking initramfs for custom DSDT
[ 0.348437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.389475] CPU0: Intel® Pentium® Dual CPU E2200 @ 2.20GHz stepping 0d
[ 0.389478] Using local APIC timer interrupts.
[ 0.392026] APIC timer calibration result 12560328
[ 0.392027] Detected 12.560 MHz APIC timer.
[ 0.392159] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4421.28 BogoMIPS (lpj=8842567)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.480412] CPU1: Intel® Pentium® Dual CPU E2200 @ 2.20GHz stepping 0d
[ 0.480434] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.484067] Brought up 2 CPUs
[ 0.484069] Total of 2 processors activated (8842.51 BogoMIPS).
[ 0.484113] CPU0 attaching sched-domain:
[ 0.484116] domain 0: span 0-1 level MC
[ 0.484118] groups: 0 1
[ 0.484121] domain 1: span 0-1 level NODE
[ 0.484123] groups: 0-1
[ 0.484127] CPU1 attaching sched-domain:
[ 0.484128] domain 0: span 0-1 level MC
[ 0.484130] groups: 1 0
[ 0.484133] domain 1: span 0-1 level NODE
[ 0.484134] groups: 0-1
[ 0.484221] net_namespace: 1552 bytes
[ 0.484221] Booting paravirtualized kernel on bare hardware
[ 0.484288] Time: 18:40:49 Date: 03/16/09
[ 0.484317] NET: Registered protocol family 16
[ 0.484337] ACPI: bus type pci registered
[ 0.484337] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[ 0.484337] PCI: Using configuration type 1 for base access
[ 0.484471] ACPI: EC: Look up EC in DSDT
[ 0.491821] ACPI: Interpreter enabled
[ 0.491824] ACPI: (supports S0 S3 S4 S5)
[ 0.491836] ACPI: Using IOAPIC for interrupt routing
[ 0.496139] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.496139] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.496139] pci 0000:00:01.0: PME# disabled
[ 0.496167] PCI: 0000:00:1b.0 reg 10 64bit mmio: [e6000000, e6003fff]
[ 0.496202] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.496205] pci 0000:00:1b.0: PME# disabled
[ 0.496249] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.496252] pci 0000:00:1c.0: PME# disabled
[ 0.496297] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.496301] pci 0000:00:1c.3: PME# disabled
[ 0.496335] PCI: 0000:00:1d.0 reg 20 io port: [b000, b01f]
[ 0.496379] PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f]
[ 0.496423] PCI: 0000:00:1d.2 reg 20 io port: [b800, b81f]
[ 0.496467] PCI: 0000:00:1d.3 reg 20 io port: [bc00, bc1f]
[ 0.496509] PCI: 0000:00:1d.7 reg 10 32bit mmio: [e6004000, e60043ff]
[ 0.496655] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.496659] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.496689] PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
[ 0.496695] PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
[ 0.496700] PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
[ 0.496705] PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
[ 0.496710] PCI: 0000:00:1f.2 reg 20 io port: [f000, f00f]
[ 0.496730] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.496733] pci 0000:00:1f.2: PME# disabled
[ 0.496772] PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
[ 0.496819] PCI: 0000:01:00.0 reg 10 32bit mmio: [e2000000, e2ffffff]
[ 0.496824] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, dfffffff]
[ 0.496836] PCI: 0000:01:00.0 reg 1c 64bit mmio: [e0000000, e1ffffff]
[ 0.496841] PCI: 0000:01:00.0 reg 24 io port: [9000, 907f]
[ 0.496846] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.496890] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.496892] PCI: bridge 0000:00:01.0 32bit mmio: [e0000000, e3ffffff]
[ 0.496897] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, dfffffff]
[ 0.496934] PCI: bridge 0000:00:1c.0 io port: [8000, 8fff]
[ 0.496994] PCI: 0000:03:00.0 reg 10 io port: [a000, a0ff]
[ 0.497015] PCI: 0000:03:00.0 reg 18 64bit mmio: [e5000000, e5000fff]
[ 0.497037] PCI: 0000:03:00.0 reg 30 32bit mmio: [0, ffff]
[ 0.497057] pci 0000:03:00.0: supports D1
[ 0.497059] pci 0000:03:00.0: supports D2
[ 0.497060] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.497065] pci 0000:03:00.0: PME# disabled
[ 0.497096] PCI: bridge 0000:00:1c.3 io port: [a000, afff]
[ 0.497100] PCI: bridge 0000:00:1c.3 32bit mmio: [e4000000, e5ffffff]
[ 0.497149] pci 0000:00:1e.0: transparent bridge
[ 0.497153] PCI: bridge 0000:00:1e.0 io port: [7000, 7fff]
[ 0.497180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.497400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.497496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.497591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.508518] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.508518] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.508518] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.508518] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.508541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.508643] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.508744] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.508847] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.508898] Linux Plug and Play Support v0.97 © Adam Belay
[ 0.508898] pnp: PnP ACPI init
[ 0.508898] ACPI: bus type pnp registered
[ 0.512427] pnp: PnP ACPI: found 15 devices
[ 0.512427] ACPI: ACPI bus type pnp unregistered
[ 0.512427] PCI: Using ACPI for IRQ routing
[ 0.540047] NET: Registered protocol family 8
[ 0.540050] NET: Registered protocol family 20
[ 0.540076] NetLabel: Initializing
[ 0.540076] NetLabel: domain hash size = 128
[ 0.540076] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.540085] NetLabel: unlabeled traffic allowed by default
[ 0.540110] PCI-GART: No AMD northbridge found.
[ 0.540120] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.540124] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.542346] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.542348] actual entries 65586
[ 0.542448] AppArmor: AppArmor Filesystem Enabled
[ 0.542468] ACPI: RTC can wake from S4
[ 0.544045] Switched to high resolution mode on CPU 0
[ 0.544475] Switched to high resolution mode on CPU 1
[ 0.556060] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.556065] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.556069] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.556073] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.556076] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.556096] system 00:0b: ioport range 0x400-0x4bf could not be reserved
[ 0.556105] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 0.556115] system 00:0d: iomem range 0xcca00-0xcffff has been reserved
[ 0.556119] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.556123] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.556127] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.556131] system 00:0d: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.556135] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.556139] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.556143] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.556147] system 00:0d: iomem range 0xfed13000-0xfed1dfff could not be reserved
[ 0.556151] system 00:0d: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 0.556156] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.556160] system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 0.556168] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.556170] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.561234] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.561237] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.561240] pci 0000:00:01.0: MEM window: 0xe0000000-0xe3ffffff
[ 0.561243] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
[ 0.561247] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.561250] pci 0000:00:1c.0: IO window: 0x8000-0x8fff
[ 0.561254] pci 0000:00:1c.0: MEM window: disabled
[ 0.561257] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.561263] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.561266] pci 0000:00:1c.3: IO window: 0xa000-0xafff
[ 0.561270] pci 0000:00:1c.3: MEM window: 0xe4000000-0xe5ffffff
[ 0.561274] pci 0000:00:1c.3: PREFETCH window: 0x00000088000000-0x000000880fffff
[ 0.561279] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.561282] pci 0000:00:1e.0: IO window: 0x7000-0x7fff
[ 0.561286] pci 0000:00:1e.0: MEM window: disabled
[ 0.561289] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.561305] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.561309] pci 0000:00:01.0: setting latency timer to 64
[ 0.561316] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.561320] pci 0000:00:1c.0: setting latency timer to 64
[ 0.561327] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.561331] pci 0000:00:1c.3: setting latency timer to 64
[ 0.561337] pci 0000:00:1e.0: setting latency timer to 64
[ 0.561340] bus: 00 index 0 io port: [0, ffff]
[ 0.561341] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.561343] bus: 01 index 0 io port: [9000, 9fff]
[ 0.561344] bus: 01 index 1 mmio: [e0000000, e3ffffff]
[ 0.561346] bus: 01 index 2 mmio: [c0000000, dfffffff]
[ 0.561347] bus: 01 index 3 mmio: [0, 0]
[ 0.561349] bus: 02 index 0 io port: [8000, 8fff]
[ 0.561350] bus: 02 index 1 mmio: [0, 0]
[ 0.561352] bus: 02 index 2 mmio: [0, 0]
[ 0.561353] bus: 02 index 3 mmio: [0, 0]
[ 0.561354] bus: 03 index 0 io port: [a000, afff]
[ 0.561356] bus: 03 index 1 mmio: [e4000000, e5ffffff]
[ 0.561357] bus: 03 index 2 mmio: [88000000, 880fffff]
[ 0.561359] bus: 03 index 3 mmio: [0, 0]
[ 0.561360] bus: 04 index 0 io port: [7000, 7fff]
[ 0.561362] bus: 04 index 1 mmio: [0, 0]
[ 0.561363] bus: 04 index 2 mmio: [0, 0]
[ 0.561364] bus: 04 index 3 io port: [0, ffff]
[ 0.561366] bus: 04 index 4 mmio: [0, ffffffffffffffff]
[ 0.561378] NET: Registered protocol family 2
[ 0.600189] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.600930] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.603460] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.604087] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.604091] TCP reno registered
[ 0.616179] NET: Registered protocol family 1
[ 0.616298] checking if image is initramfs... it is
[ 1.315253] Freeing initrd memory: 8443k freed
[ 1.320216] audit: initializing netlink socket (disabled)
[ 1.320238] type=2000 audit(1237228849.320:1): initialized
[ 1.325679] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.327854] VFS: Disk quotas dquot_6.5.1
[ 1.327935] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.328040] msgmni has been set to 4017
[ 1.328156] io scheduler noop registered
[ 1.328158] io scheduler anticipatory registered
[ 1.328160] io scheduler deadline registered
[ 1.328276] io scheduler cfq registered (default)
[ 1.328384] pci 0000:01:00.0: Boot video device
[ 1.328479] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.328508] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.328536] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.328615] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.328644] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.328675] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.328710] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.328794] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.328822] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.328852] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.328892] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.361060] Linux agpgart interface v0.103
[ 1.361066] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.361207] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.361913] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.363521] brd: module loaded
[ 1.363588] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.363706] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.364037] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.364043] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.381327] mice: PS/2 mouse device common for all mice
[ 1.381460] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.381486] rtc0: alarms up to one month, hpet irqs
[ 1.381526] cpuidle: using governor ladder
[ 1.381529] cpuidle: using governor menu
[ 1.381866] TCP cubic registered
[ 1.382064] registered taskstats version 1
[ 1.382157] Magic number: 1:226:696
[ 1.382296] rtc_cmos 00:03: setting system clock to 2009-03-16 18:40:50 UTC (1237228850)
[ 1.382299] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.382300] EDD information not available.
[ 1.382335] Freeing unused kernel memory: 536k freed
[ 1.382510] Write protecting the kernel read-only data: 4348k
[ 1.416157] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.500132] fuse init (API version 7.9)
[ 1.707151] processor ACPI0007:00: registered as cooling_device0
[ 1.707156] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 1.707345] ACPI: SSDT 7FFF6F80, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 1.707551] processor ACPI0007:01: registered as cooling_device1
[ 1.707555] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 1.946138] usbcore: registered new interface driver usbfs
[ 1.946167] usbcore: registered new interface driver hub
[ 1.953843] usbcore: registered new device driver usb
[ 1.955390] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.955413] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.955436] r8169 0000:03:00.0: setting latency timer to 64
[ 1.955791] eth0: RTL8168b/8111b at 0xffffc200008ba000, 00:16:e6:35:72:9a, XID 38000000 IRQ 2300
[ 1.956988] USB Universal Host Controller Interface driver v3.0
[ 1.957036] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.957044] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.957048] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.957091] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.957131] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
[ 1.957273] usb usb1: configuration #1 chosen from 1 choice
[ 1.957298] hub 1-0:1.0: USB hub found
[ 1.957304] hub 1-0:1.0: 2 ports detected
[ 2.020772] No dock devices found.
[ 2.045335] SCSI subsystem initialized
[ 2.061338] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.061350] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.061354] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.061377] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.061420] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 2.061514] usb usb2: configuration #1 chosen from 1 choice
[ 2.061537] hub 2-0:1.0: USB hub found
[ 2.061543] hub 2-0:1.0: 2 ports detected
[ 2.078610] libata version 3.00 loaded.
[ 2.165343] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.165354] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.165357] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.165390] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.165432] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 2.165533] usb usb3: configuration #1 chosen from 1 choice
[ 2.165557] hub 3-0:1.0: USB hub found
[ 2.165563] hub 3-0:1.0: 2 ports detected
[ 2.269272] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.269286] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.269289] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.269313] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.269351] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 2.269444] usb usb4: configuration #1 chosen from 1 choice
[ 2.269467] hub 4-0:1.0: USB hub found
[ 2.269473] hub 4-0:1.0: 2 ports detected
[ 2.476339] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.476357] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.476360] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.476388] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.480312] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.480324] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe6004000
[ 2.589048] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 2.600066] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.600247] usb usb5: configuration #1 chosen from 1 choice
[ 2.600273] hub 5-0:1.0: USB hub found
[ 2.600280] hub 5-0:1.0: 8 ports detected
[ 2.656075] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 2.810364] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.810392] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 2.810402] pata_acpi 0000:00:1f.2: PCI INT B disabled
[ 2.813452] ata_piix 0000:00:1f.2: version 2.12
[ 2.813467] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.813471] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.813510] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.813793] scsi0 : ata_piix
[ 2.813896] scsi1 : ata_piix
[ 2.814585] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 2.814588] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 2.984821] ata1.00: HPA unlocked: 312579695 -> 312581808, native 312581808
[ 2.984827] ata1.00: ATA-7: SAMSUNG HD160JJ, ZM100-47, max UDMA7
[ 2.984829] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.016336] ata1.00: configured for UDMA/133
[ 3.160033] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 3.180379] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S162A, TS00, max UDMA/33
[ 3.196320] ata2.00: configured for UDMA/33
[ 3.196361] isa bounce pool size: 16 pages
[ 3.196439] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5
[ 3.198459] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S162A TS00 PQ: 0 ANSI: 5
[ 3.204389] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.204430] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.216212] Driver 'sd' needs updating - please use bus_type methods
[ 3.216347] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 3.216365] sd 0:0:0:0: [sda] Write Protect is off
[ 3.216368] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.216395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.216472] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 3.216487] sd 0:0:0:0: [sda] Write Protect is off
[ 3.216489] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.216515] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.216518] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 3.223562] sda1 sda2 < sda5 > sda3 sda4
[ 3.235967] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.238307] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.238312] Uniform CD-ROM driver Revision: 3.20
[ 3.238408] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.362626] usb 4-1: configuration #1 chosen from 1 choice
[ 5.889519] PM: Starting manual resume from disk
[ 5.889523] PM: Resume from partition 8:4
[ 5.889524] PM: Checking hibernation image.
[ 5.889705] PM: Resume from disk failed.
[ 5.903317] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.903320] EXT3-fs: write access will be enabled during recovery.
[ 6.307091] kjournald starting. Commit interval 5 seconds
[ 6.307112] EXT3-fs: recovery complete.
[ 6.307903] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.139747] udevd version 124 started
[ 11.306981] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 11.332049] ACPI: Power Button (FF) [PWRF]
[ 11.332135] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 11.364043] ACPI: Power Button (CM) [PWRB]
[ 11.423562] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.471669] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.610063] parport_pc 00:08: reported by Plug and Play ACPI
[ 11.610124] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 11.910577] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
[ 11.910601] usbcore: registered new interface driver usblp
[ 11.942867] iTCO_vendor_support: vendor-support=0
[ 11.945228] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 11.945302] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 11.945394] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.000182] intel_rng: FWH not detected
[ 12.058751] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.058775] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.064349] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 12.831783] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 14.104175] lp0: using parport0 (interrupt-driven).
[ 14.245477] Adding 1992020k swap on /dev/sda4. Priority:-1 extents:1 across:1992020k
[ 14.796787] EXT3 FS on sda3, internal journal
[ 15.691765] type=1505 audit(1237221664.687:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4050
[ 15.823174] type=1505 audit(1237221664.819:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4055
[ 15.823365] type=1505 audit(1237221664.819:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4055
[ 15.932041] ip_tables: © 2000-2006 Netfilter Core Team
[ 16.331610] ACPI: WMI: Mapper loaded
[ 17.072553] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 17.215361] ppdev: user-space parallel port driver
[ 18.946523] Bluetooth: Core ver 2.13
[ 18.946645] NET: Registered protocol family 31
[ 18.946649] Bluetooth: HCI device and connection manager initialized
[ 18.946653] Bluetooth: HCI socket layer initialized
[ 18.976536] Bluetooth: L2CAP ver 2.11
[ 18.976544] Bluetooth: L2CAP socket layer initialized
[ 19.032351] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.032360] Bluetooth: SCO socket layer initialized
[ 19.056123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.056132] Bluetooth: BNEP filters: protocol multicast
[ 19.092638] Bridge firewalling registered
[ 19.092887] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 19.101793] Bluetooth: RFCOMM socket layer initialized
[ 19.102614] Bluetooth: RFCOMM TTY layer initialized
[ 19.102621] Bluetooth: RFCOMM ver 1.10
[ 23.300647] r8169: eth0: link up
[ 23.300663] r8169: eth0: link up
[ 23.557230] NET: Registered protocol family 17
[ 115.645390] type=1503 audit(1237221764.642:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5551/net/" pid=5551 profile="/usr/sbin/cupsd"
[ 116.676608] type=1503 audit(1237221765.671:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5555/net/" pid=5555 profile="/usr/sbin/cupsd"
[ 116.748524] NET: Registered protocol family 10
[ 116.749238] lo: Disabled Privacy Extensions
[ 116.750984] type=1503 audit(1237221765.746:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5555 profile="/usr/sbin/cupsd"
[ 116.751002] type=1503 audit(1237221765.746:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5555 profile="/usr/sbin/cupsd"
[ 116.751011] type=1503 audit(1237221765.746:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5555 profile="/usr/sbin/cupsd"
[ 116.751019] type=1503 audit(1237221765.746:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5555 profile="/usr/sbin/cupsd"
[ 116.751028] type=1503 audit(1237221765.746:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5555 profile="/usr/sbin/cupsd"
[ 116.751036] type=1503 audit(1237221765.746:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5555 profile="/usr/sbin/cupsd"
[ 116.751045] type=1503 audit(1237221765.746:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5555 profile="/usr/sbin/cupsd"
[ 116.751053] type=1503 audit(1237221765.746:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5555 profile="/usr/sbin/cupsd"
[ 117.828213] ppdev0: registered pardevice
[ 117.876044] ppdev0: unregistered pardevice
[ 118.109218] ppdev0: registered pardevice
[ 118.156307] ppdev0: unregistered pardevice
[ 118.425648] ppdev0: registered pardevice
[ 118.472193] ppdev0: unregistered pardevice
[ 126.792009] eth0: no IPv6 routers presentShutting down ALSA
Баг убунты, который наглухо вешает выключение.
Как оказалось лечится добавлением ifconfig eth0 down в начало /etc/init.d/alsa-utils
Долгое выключение ALSA
У меня мат. плата ASUS и звуковая карта VIA. При выключении/перезагрузке (Ubuntu 8.10) ALSA выключается примерно 5 минут. Чтобы выключение происходило нормально, делаем следующее:
1. Качаем патч [Jaunty | Intrepid] (https://bugs.launchpad.net/ubuntu/+source/alsa-utils/+bug/274995).
2. Кидаем его в отдельную директорию например alsa-utils [mkdir alsa-utils && cd alsa-utils].
3. Устанавливаем пакеты для сборки пакета [sudo apt-get install build-essential fakeroot devscripts].
4. Получаем исходники [apt-get source alsa-utils].
5. Получаем библиотеки для компилирования исходников [sudo apt-get build-dep alsa-utils].
6. Переходим в директорию [cd alsa-*].
7. Применяем debdiff изменения [patch -p1 < ../alsa-utils_1.0.17-0ubuntu3.debdiff].
8. Компилируем [debuild -uc -us].
9. Устанавливаем пакет [sudo dpkg -i ../alsa-*.deb].
Перезагружаемся и радуемся быстрой перезагрузке
(еще накопал) писал(а):Да проблема есть. Отключатся система, но минут эдак через пять.
1. Вариант лечения - sudo ifconfig eth0 down . работает
2. Вариант http://www.slo.ru/news/entry/391 удалением pulse audio server. не проверял
sudo ifconfig eth0 down
sudo ifconfig ppp0 down
/etc/init.d/alsa-utils
sudo
nano /etc/init.d/alsa-utils
