Поддержка DVI в драйверах ATI (существует оная?)

nVidia, ATI, SIS, VIA и др.

Модератор: Модераторы разделов

Аватара пользователя
makus
Сообщения: 48
ОС: Linux

Поддержка DVI в драйверах ATI

Сообщение makus »

Поставил родной драйвер от ATI (Ati 9200, XOrg, SuSE 9.3). После этого сигнал через DVI-разъем перестал подаваться. Это лечится как-нибудь?

Кроме того, некоторые OpenGL-заставки виснут, а на Tux Racer смотреть без слез невозможно - он должен быть таким угловатым? Или существует сглаживание для 3D?
С уважением.
Спасибо сказали:
Вернуться к началу
Аватара пользователя
ArtSh
Сообщения: 433
ОС: Gentoo

Re: Поддержка DVI в драйверах ATI

Сообщение ArtSh »

Покажите пожалйста файл /var/log/Xorg.0.log, нет ли там ошибок. И файл Xorg.conf.
Поставь букву "Ё" на место еЁ!
Спасибо сказали:
Вернуться к началу
Аватара пользователя
makus
Сообщения: 48
ОС: Linux

Re: Поддержка DVI в драйверах ATI

Сообщение makus »

Xorg.0.log:

Код: Выделить всё

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux linux 2.6.11.4-21.7-default #1 Thu Jun 2 14:23:14 UTC 2005 i686
Build Date: 22 March 2005
    Before reporting problems, check [url=http://wiki.X.Org]http://wiki.X.Org[/url]
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 18 07:18:54 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout[all]"
(**) |-->Screen "Screen[0]" (0)
(**) |   |-->Monitor "Monitor[0]"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Keyboard[0]"
(**) |-->Input Device "Mouse[1]"
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
    Entry deleted from font path.
...
(WW) The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist.
    Entry deleted from font path.
(**) FontPath set to "..."

(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) Input device list set to "..."

(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(**) Option "Xinerama" "off"
(**) Option "RandR" "on"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.2
    X.Org Video Driver: 0.7
    X.Org XInput driver : 0.4
    X.Org Server Extension : 0.2
    X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:09:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:00:0: chip 1002,5961 card 174b,7c13 rev 01 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,5941 card 174b,7c12 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
    [0] -1    0    0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
    [0] -1    0    0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
    [0] -1    0    0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
    [0] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(--) PCI:*(2:0:0) ATI Technologies Inc Radeon RV280 [Radeon 9200] rev 1, Mem @ 0xd0000000/27, 0xe5000000/16, I/O @ 0xd000/8
(--) PCI: (2:0:1) ATI Technologies Inc unknown chipset (0x5941) rev 1, Mem @ 0xd8000000/27, 0xe5010000/16
(II) Addressable bus resource ranges are
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
    [0] -1    0    0xe6001000 - 0xe6001fff (0x1000) MX[B]
    [1] -1    0    0xe6000000 - 0xe60000ff (0x100) MX[B]
    [2] -1    0    0xe6003000 - 0xe6003fff (0x1000) MX[B]
    [3] -1    0    0xe6002000 - 0xe6002fff (0x1000) MX[B]
    [4] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [5] -1    0    0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
    [6] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [7] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[B]
    [8] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
    [9] -1    0    0x0000e400 - 0x0000e407 (0x8) IX[B]
    [10] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[B]
    [11] -1    0    0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
    [0] -1    0    0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
    [1] -1    0    0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
    [0] -1    0    0xe6001000 - 0xe6001fff (0x1000) MX[B]
    [1] -1    0    0xe6000000 - 0xe60000ff (0x100) MX[B]
    [2] -1    0    0xe6003000 - 0xe6003fff (0x1000) MX[B]
    [3] -1    0    0xe6002000 - 0xe6002fff (0x1000) MX[B]
    [4] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [5] -1    0    0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
    [6] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [7] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[B]
    [8] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
    [9] -1    0    0x0000e400 - 0x0000e407 (0x8) IX[B]
    [10] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[B]
    [11] -1    0    0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
    [0] -1    0    0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
    [1] -1    0    0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1    0    0xe6001000 - 0xe6001fff (0x1000) MX[B]
    [6] -1    0    0xe6000000 - 0xe60000ff (0x100) MX[B]
    [7] -1    0    0xe6003000 - 0xe6003fff (0x1000) MX[B]
    [8] -1    0    0xe6002000 - 0xe6002fff (0x1000) MX[B]
    [9] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [10] -1    0    0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
    [11] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [12] -1    0    0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
    [13] -1    0    0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [15] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    [16] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[B]
    [17] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
    [18] -1    0    0x0000e400 - 0x0000e407 (0x8) IX[B]
    [19] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[B]
    [20] -1    0    0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 6.8.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  object file contains no symbols
(II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  object file contains no symbols
(II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  object file contains no symbols
(II) Module GLcore: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 0.0.1
    ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 6.8.0, module version = 8.14.13
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) ATI Radeon/FireGL: The following chipsets are supported:
    ...
    RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
    ...
(II) Primary Device is: PCI 02:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset RADEON 9200 (RV280 5961) found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1    0    0xe6001000 - 0xe6001fff (0x1000) MX[B]
    [6] -1    0    0xe6000000 - 0xe60000ff (0x100) MX[B]
    [7] -1    0    0xe6003000 - 0xe6003fff (0x1000) MX[B]
    [8] -1    0    0xe6002000 - 0xe6002fff (0x1000) MX[B]
    [9] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [10] -1    0    0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
    [11] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [12] -1    0    0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
    [13] -1    0    0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [15] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    [16] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[B]
    [17] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
    [18] -1    0    0x0000e400 - 0x0000e407 (0x8) IX[B]
    [19] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[B]
    [20] -1    0    0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8219758
(II) resource ranges after probing:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1    0    0xe6001000 - 0xe6001fff (0x1000) MX[B]
    [6] -1    0    0xe6000000 - 0xe60000ff (0x100) MX[B]
    [7] -1    0    0xe6003000 - 0xe6003fff (0x1000) MX[B]
    [8] -1    0    0xe6002000 - 0xe6002fff (0x1000) MX[B]
    [9] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [10] -1    0    0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
    [11] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [12] -1    0    0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
    [13] -1    0    0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [14] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
    [15] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [16] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
    [17] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [18] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    [19] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[B]
    [20] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
    [21] -1    0    0x0000e400 - 0x0000e407 (0x8) IX[B]
    [22] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[B]
    [23] -1    0    0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
    [24] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
    [25] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 2 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "28-65"
(**) fglrx(0): Option "VRefresh2" "57-75"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9200 (RV280 5961)" (Chipset = 0x5961)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c13)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe5000000
(--) fglrx(0): ChipExtRevID = 0x01
(--) fglrx(0): ChipIntRevID = 0x00
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit DDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.2.0
    ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) fglrx(0): All-In-Wonder card detected
(**) fglrx(0): MonitorLayout Option:
    Monitor1--Type AUTO, Monitor2--Type AUTO

(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
 Monitor   -- NONE
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) fglrx(0): Secondary head:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: SNY  Model: 2670  Serial#: 16843009
(II) fglrx(0): Year: 2004  Week: 36
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.641 redY: 0.342   greenX: 0.292 greenY: 0.611
(II) fglrx(0): blueX: 0.147 blueY: 0.068   whiteX: 0.281 whiteY: 0.297
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz   Image Size:  359 x 287 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 57  V max: 75 Hz, H min: 28  H max: 65 kHz, PixClock max 110 MHz
(II) fglrx(0): Monitor name: SDM-X73
(II) fglrx(0): Serial No: 1720035
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0):  PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total 5 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) fglrx(0):  Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) fglrx(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) fglrx(0): Display dimensions: (340, 270) mm
(**) fglrx(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o":  object file contains no symbols
(II) Module fb: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.2.0
    ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 6.8.0, module version = 8.14.13
    ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x0000088f
(==) fglrx(0): OpenGL ClientDriverName: "atiogl_a_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0    0    0xe5000000 - 0xe500ffff (0x10000) MX[B]
    [1] 0    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
    [2] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [3] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [4] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [5] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [6] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [7] -1    0    0xe6001000 - 0xe6001fff (0x1000) MX[B]
    [8] -1    0    0xe6000000 - 0xe60000ff (0x100) MX[B]
    [9] -1    0    0xe6003000 - 0xe6003fff (0x1000) MX[B]
    [10] -1    0    0xe6002000 - 0xe6002fff (0x1000) MX[B]
    [11] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [12] -1    0    0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
    [13] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [14] -1    0    0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
    [15] -1    0    0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    [16] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
    [17] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [18] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
    [19] 0    0    0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [20] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [21] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    [22] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[B]
    [23] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
    [24] -1    0    0x0000e400 - 0x0000e407 (0x8) IX[B]
    [25] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[B]
    [26] -1    0    0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
    [27] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
    [28] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
(WW) fglrx(0): Cannot read colourmap from VGA.  Will restore with default
(II) fglrx(0): UMM area:     0xd0701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x
(II) fglrx(0): detected X.org 6.8.2
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:2:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:2:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe1281000
(II) fglrx(0): [drm] mapped SAREA 0xe1281000 to 0xb7cd5000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.14.13
(II) fglrx(0):     Date: Jun  8 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.11.4-21.7-default
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xe5000000
(II) fglrx(0): [agp] Mode=0x1f00421b bridge: 0x10de/0x01e0
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f00431a
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe9a81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x00701000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "CalcAlgorithm" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Solid Lines
    Dashed Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
  30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(**) fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard[0]: Core Keyboard
(**) Option "Protocol" "Standard"
(**) Keyboard[0]: Protocol: Standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard[0]: XkbRules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) Keyboard[0]: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ru"
(**) Keyboard[0]: XkbLayout: "us,ru"
(**) Option "XkbVariant" ",winkeys"
(**) Keyboard[0]: XkbVariant: ",winkeys"
(**) Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
(**) Keyboard[0]: XkbOptions: "grp:ctrl_shift_toggle,grp_led:scroll"
(**) Option "CustomKeycodes" "off"
(**) Keyboard[0]: CustomKeycodes disabled
(**) Option "Protocol" "explorerps/2"
(**) Mouse[1]: Device: "/dev/input/mice"
(**) Mouse[1]: Protocol: "explorerps/2"
(**) Option "CorePointer"
(**) Mouse[1]: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "12"
(==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse[1]: ZAxisMapping: buttons 4 and 5
(**) Mouse[1]: Buttons: 12
(II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD)
(II) Mouse[1]: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list!
SetClientVersion: 0 8


xorg.conf:

Код: Выделить всё

Section "Files"
EndSection
Section "ServerFlags"
  Option       "AllowMouseOpenFail"
  Option       "RandR" "on"
EndSection
Section "Module"
  Load         "dbe"
  Load         "type1"
  Load         "freetype"
  Load         "extmod"
  Load         "glx"
  Load         "v4l"
  Load         "dri"
EndSection
Section "InputDevice"
EndSection
Section "InputDevice"
EndSection

Section "Monitor"
  Option       "CalcAlgorithm" "CheckDesktopGeometry"
  DisplaySize  340 270
  HorizSync    28-65
  Identifier   "Monitor[0]"
  ModelName    "SDM-X73"
  Option       "DPMS"
  VendorName   "SONY"
  VertRefresh  57-75
  UseModes     "Modes[0]"
EndSection

Section "Modes"
  Identifier   "Modes[0]"
EndSection

Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      24
    Modes      "1280x1024"
    ViewPort    0 0  # initial origin if mode is smaller than desktop
  EndSubSection
  Device       "ATI Graphics Adapter"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "vga"
EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
    Option "DesktopSetup"               "0x00000000"
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "28-65"
    Option "VRefresh2"                  "57-75"
    Option "ScreenOverlap"              "0"

    Option "NoTV"                       "yes"
    Option "TVStandard"                 "NTSC-M"
    Option "TVHSizeAdj"                 "0"
    Option "TVVSizeAdj"                 "0"
    Option "TVHPosAdj"                  "0"
    Option "TVVPosAdj"                  "0"
    Option "TVHStartAdj"                "0"
    Option "TVColorAdj"                 "0"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"

    Option "Capabilities"               "0x00000000"

    Option "VideoOverlay"               "on"

    Option "OpenGLOverlay"              "off"

    Option "CenterMode"                 "off"

    Option "PseudoColorVisuals"         "off"

    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"

    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"

    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
#    BusID "PCI:2:0:0"    # vendor=1002, device=5961
    BusID "2:0:0"
    Screen 0
EndSection

Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Option       "Clone" "off"
  Option       "Xinerama" "off"
  Screen       "Screen[0]"
EndSection

Section "DRI"
    Group      "video"
    Mode       0666
EndSection
С уважением.
Спасибо сказали:
Вернуться к началу
Аватара пользователя
makus
Сообщения: 48
ОС: Linux

Re: Поддержка DVI в драйверах ATI

Сообщение makus »

Все. Отправляюсь качать драйверы с DRI Project :blink:
С уважением.
Спасибо сказали:
Вернуться к началу
Аватара пользователя
ddc
Бывший модератор
Сообщения: 3535
Статус: OpenBSD-compatible
ОС: OpenBSD -current

Re: Поддержка DVI в драйверах ATI

Сообщение ddc »

Для makus:
Что откуда качать??? Они же в X.org!!!
Спасибо сказали:
Вернуться к началу
Аватара пользователя
makus
Сообщения: 48
ОС: Linux

Re: Поддержка DVI в драйверах ATI

Сообщение makus »

Краснею от стыда :(

Насколько я понял - дело в следующих строчках:

Option "DesktopSetup"              "0x00000000"
Option "MonitorLayout"              "AUTO, AUTO"


Напоролся где-то на описание возможных значений MonitorLayout для XFree. Пробовал насильно указать режим DVI и отключить второй монитор. Несколько вариантов перепробовал. Максимум чего добился - отключения и обычного VGA порта и даже зависания системы.
С уважением.
Спасибо сказали:
Вернуться к началу
Аватара пользователя
ArtSh
Сообщения: 433
ОС: Gentoo

Re: Поддержка DVI в драйверах ATI

Сообщение ArtSh »

Попробуйте отключить встроенный модуль AGP

Option "UseInternalAGPGART" "no"

скорее всего поможет, если нет, то ждите следующей версии или попробуйте предыдущую
Поставь букву "Ё" на место еЁ!
Спасибо сказали:
Вернуться к началу
Аватара пользователя
Marduk
Сообщения: 247

Re: Поддержка DVI в драйверах ATI

Сообщение Marduk »

(ArtSh @ Воскресенье, 24 Июля 2005, 14:27) писал(а):Попробуйте отключить встроенный модуль AGP

Option "UseInternalAGPGART"        "no"

скорее всего поможет, если нет, то ждите следующей версии или попробуйте предыдущую

Это если работает agpgart ядра, сначала изучите лог загрузки на предмет agpgart. Например с VIA KT400 2.4-ядра не очень-то дружат. Хотя ума не приложу какое agpgart имеет отношение к DVI-порту...
[ Arch Linux || xmonad || dzen2 ]
Спасибо сказали:
Вернуться к началу
Аватара пользователя
makus
Сообщения: 48
ОС: Linux

Re: Поддержка DVI в драйверах ATI

Сообщение makus »

Спасибо! Обязательно попробую.
С уважением.
Спасибо сказали:
Вернуться к началу
Аватара пользователя
ArtSh
Сообщения: 433
ОС: Gentoo

Re: Поддержка DVI в драйверах ATI

Сообщение ArtSh »

(Marduk @ Воскресенье, 24 Июля 2005, 18:34) писал(а):... Хотя ума не приложу какое agpgart имеет отношение к DVI-порту...


Для fglrx имеет, и ещё какое! При некоторых настройках не то что DVI, вообще компьютер висит. :angry:
Поставь букву "Ё" на место еЁ!
Спасибо сказали:
Вернуться к началу
Аватара пользователя
makus
Сообщения: 48
ОС: Linux

Re: Поддержка DVI в драйверах ATI

Сообщение makus »

Не помогло :(

Не понимаю, почему у ATI постоянно какие-то проблемы с драйверами для linux? Хоть на Нвидиа переходи...
С уважением.
Спасибо сказали:
Вернуться к началу

Вернуться в «Видео-карты и мониторы»