Просьба, если кто может помочь (советом).
Все работает, а вот это буквально убивает в смятку весь ноут
На ноуте стоит Xubuntu 9.04, обновлен.
Linux berkut 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 GNU/Linux
До этого пасся родной заводской хрюша хоум.
Это ноут для моих родителей, ПК вообщем они только изучают. Очень хочется, чтобы им не пришлось начинать знакомство с компами с поделок мелкомягких. (Ну и сделать на одну в мире венду меньше.
)При старте и выключении система часто и произвольно подвисает до 30 секунд, после выводя сообщение:
[ 3.820072] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 4.027190] usb 2-2: configuration #1 chosen from 1 choice
[ 33.816117] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 33.816173] ata1.00: cmd ca/00:08:53:95:6f/00:00:00:00:00/e4 tag 0 dma 4096 out
[ 33.816175] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 33.816266] ata1.00: status: { DRDY }
Полный dmesg, сразу после загрузки:
Код:
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable)
[ 0.000000] BIOS-e820: 0000000017fd0000 - 0000000017fde000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000017fde000 - 0000000018000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x17fd0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000017fd0000 (usable)
[ 0.000000] modified: 0000000017fd0000 - 0000000017fde000 (ACPI data)
[ 0.000000] modified: 0000000017fde000 - 0000000018000000 (ACPI NVS)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 17fd0000 @ 10000-16000
[ 0.000000] RAMDISK: 17884000 - 17fbf23a
[ 0.000000] ACPI: RSDP 000F84E0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 17FD0000, 003C (r1 A.M.I. OEMRSDT 2000707 MSFT 97)
[ 0.000000] ACPI: FACP 17FD0200, 0084 (r2 A.M.I. OEMFACP 2000707 MSFT 97)
[ 0.000000] ACPI: DSDT 17FD05E0, 6FFB (r1 0AAAA 0AAAAB58 B58 INTL 2002026)
[ 0.000000] ACPI: FACS 17FDE000, 0040
[ 0.000000] ACPI: APIC 17FD0390, 005C (r1 A.M.I. OEMAPIC 2000707 MSFT 97)
[ 0.000000] ACPI: MCFG 17FD03F0, 003C (r1 A.M.I. OEMMCFG 2000707 MSFT 97)
[ 0.000000] ACPI: BOOT 17FD05B0, 0028 (r1 A.M.I. OEMBOOT 2000707 MSFT 97)
[ 0.000000] ACPI: SLIC 17FD0430, 0176 (r1 A.M.I. OEMSLIC 2000707 MSFT 97)
[ 0.000000] ACPI: OEMB 17FDE040, 0056 (r1 A.M.I. AMI_OEM 2000707 MSFT 97)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 383MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 17fd0000
[ 0.000000] low ram: 00000000 - 17fd0000
[ 0.000000] bootmap 00012000 - 00014ffc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0017fd0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [0017884000 - 0017fbf23a] RAMDISK ==> [0017884000 - 0017fbf23a]
[ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000015000] BOOTMAP ==> [0000012000 - 0000015000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00017fd0
[ 0.000000] HighMem 0x00017fd0 -> 0x00017fd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00017fd0
[ 0.000000] On node 0 totalpages: 98143
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 93424 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e6e00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97375
[ 0.000000] Kernel command line: root=UUID=1cffd031-9e3a-4d83-9967-4c1a8183959c ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.984 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] allocated 1964800 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 371868k/393024k available (4126k kernel code, 20612k reserved, 2208k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd87d0000 - 0xff3fe000 ( 620 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd7fd0000 ( 383 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.96 BogoMIPS (lpj=6399936)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.019511] ACPI: Core revision 20080926
[ 0.023593] ACPI: Checking initramfs for custom DSDT
[ 0.420553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.461337] CPU0: Genuine Intel® CPU T2060 @ 1.60GHz stepping 0c
[ 0.464001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3200.39 BogoMIPS (lpj=6400789)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.548423] CPU1: Genuine Intel® CPU T2060 @ 1.60GHz stepping 0c
[ 0.548447] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.552066] Brought up 2 CPUs
[ 0.552070] Total of 2 processors activated (6400.36 BogoMIPS).
[ 0.552134] CPU0 attaching sched-domain:
[ 0.552137] domain 0: span 0-1 level MC
[ 0.552141] groups: 0 1
[ 0.552149] CPU1 attaching sched-domain:
[ 0.552151] domain 0: span 0-1 level MC
[ 0.552154] groups: 1 0
[ 0.552273] net_namespace: 776 bytes
[ 0.552290] Booting paravirtualized kernel on bare hardware
[ 0.552502] Time: 17:05:13 Date: 05/16/09
[ 0.552502] regulator: core version 0.5
[ 0.552502] NET: Registered protocol family 16
[ 0.552502] EISA bus registered
[ 0.552502] ACPI: bus type pci registered
[ 0.552502] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.552502] PCI: Not using MMCONFIG.
[ 0.552551] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.552554] PCI: Using configuration type 1 for base access
[ 0.556605] ACPI: EC: Look up EC in DSDT
[ 0.571435] ACPI: Interpreter enabled
[ 0.571444] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.571474] ACPI: Using IOAPIC for interrupt routing
[ 0.571690] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.576189] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.576193] PCI: Using MMCONFIG for extended config space
[ 0.585017] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.585020] ACPI: EC: driver started in poll mode
[ 0.585214] ACPI: No dock devices found.
[ 0.585316] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.585376] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.585484] pci 0000:00:13.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
[ 0.585571] pci 0000:00:13.1: reg 10 32bit mmio: [0xfebfe000-0xfebfefff]
[ 0.585677] pci 0000:00:13.2: reg 10 32bit mmio: [0xfebfd000-0xfebfdfff]
[ 0.585742] pci 0000:00:13.2: supports D1 D2
[ 0.585745] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.585752] pci 0000:00:13.2: PME# disabled
[ 0.585796] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[ 0.585808] pci 0000:00:14.0: reg 14 32bit mmio: [0x000000-0x0003ff]
[ 0.585855] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.585907] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.585918] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.585929] pci 0000:00:14.1: reg 18 io port: [0x170-0x177]
[ 0.585939] pci 0000:00:14.1: reg 1c io port: [0x374-0x377]
[ 0.585950] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.586058] pci 0000:00:14.2: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff]
[ 0.586114] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.586121] pci 0000:00:14.2: PME# disabled
[ 0.586324] pci 0000:01:05.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
[ 0.586331] pci 0000:01:05.0: reg 14 io port: [0x9800-0x98ff]
[ 0.586338] pci 0000:01:05.0: reg 18 32bit mmio: [0xfe1f0000-0xfe1fffff]
[ 0.586355] pci 0000:01:05.0: reg 30 32bit mmio: [0xfe1c0000-0xfe1dffff]
[ 0.586364] pci 0000:01:05.0: supports D1 D2
[ 0.586397] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.586401] pci 0000:00:01.0: bridge 32bit mmio: [0xfe100000-0xfe1fffff]
[ 0.586406] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbdf00000-0xddefffff]
[ 0.586472] pci 0000:02:00.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.586485] pci 0000:02:00.0: reg 14 32bit mmio: [0xfeaffc00-0xfeaffcff]
[ 0.586551] pci 0000:02:00.0: supports D1 D2
[ 0.586553] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.586561] pci 0000:02:00.0: PME# disabled
[ 0.586625] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.586643] pci 0000:02:01.0: supports D1 D2
[ 0.586645] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.586653] pci 0000:02:01.0: PME# disabled
[ 0.586717] pci 0000:02:01.1: reg 10 32bit mmio: [0xfeaff800-0xfeaff8ff]
[ 0.586792] pci 0000:02:01.1: supports D1 D2
[ 0.586794] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.586801] pci 0000:02:01.1: PME# disabled
[ 0.586865] pci 0000:02:01.2: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff]
[ 0.586940] pci 0000:02:01.2: supports D1 D2
[ 0.586942] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.586949] pci 0000:02:01.2: PME# disabled
[ 0.587006] pci 0000:02:03.0: reg 10 32bit mmio: [0xfeafc000-0xfeafdfff]
[ 0.587143] pci 0000:00:14.4: transparent bridge
[ 0.587154] pci 0000:00:14.4: bridge io port: [0xa000-0xbfff]
[ 0.587161] pci 0000:00:14.4: bridge 32bit mmio: [0xfe200000-0xfeafffff]
[ 0.587168] pci 0000:00:14.4: bridge 32bit mmio pref: [0xddf00000-0xdfefffff]
[ 0.587213] bus 00 -> node 0
[ 0.587224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.587435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.587631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.596462] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.596671] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.596873] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.597074] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.597276] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.597477] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.597673] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.597874] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.598142] ACPI: WMI: Mapper loaded
[ 0.598219] SCSI subsystem initialized
[ 0.598219] libata version 3.00 loaded.
[ 0.598219] usbcore: registered new interface driver usbfs
[ 0.598219] usbcore: registered new interface driver hub
[ 0.598219] usbcore: registered new device driver usb
[ 0.598219] PCI: Using ACPI for IRQ routing
[ 0.598219] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.604014] Bluetooth: Core ver 2.13
[ 0.604033] NET: Registered protocol family 31
[ 0.604033] Bluetooth: HCI device and connection manager initialized
[ 0.604033] Bluetooth: HCI socket layer initialized
[ 0.604033] NET: Registered protocol family 8
[ 0.604033] NET: Registered protocol family 20
[ 0.604046] NetLabel: Initializing
[ 0.604048] NetLabel: domain hash size = 128
[ 0.604050] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.604069] NetLabel: unlabeled traffic allowed by default
[ 0.604164] AppArmor: AppArmor Filesystem Enabled
[ 0.608014] pnp: PnP ACPI init
[ 0.608027] ACPI: bus type pnp registered
[ 0.611903] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.611908] pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.611912] pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.611917] pnp 00:0d: mem resource (0x100000-0x17ffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.612451] pnp: PnP ACPI: found 14 devices
[ 0.612454] ACPI: ACPI bus type pnp unregistered
[ 0.612459] PnPBIOS: Disabled by ACPI PNP
[ 0.612474] system 00:07: ioport range 0xa00-0xa0f has been reserved
[ 0.612482] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.612485] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.612488] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.612492] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.612495] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.612499] system 00:08: ioport range 0xc50-0xc51 has been reserved
[ 0.612502] system 00:08: ioport range 0xc52-0xc52 has been reserved
[ 0.612505] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.612509] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.612513] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.612520] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.612524] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.612527] system 00:08: ioport range 0x800-0x89f has been reserved
[ 0.612531] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.612534] system 00:08: ioport range 0x900-0x90f has been reserved
[ 0.612538] system 00:08: ioport range 0x910-0x91f has been reserved
[ 0.612541] system 00:08: ioport range 0x8200-0x821f has been reserved
[ 0.612545] system 00:08: ioport range 0x4000-0x4004 has been reserved
[ 0.612548] system 00:08: ioport range 0x4005-0x40ff has been reserved
[ 0.612553] system 00:08: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.612561] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.612565] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.612572] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.647364] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.647368] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.647373] pci 0000:00:01.0: MEM window: 0xfe100000-0xfe1fffff
[ 0.647378] pci 0000:00:01.0: PREFETCH window: 0x000000bdf00000-0x000000ddefffff
[ 0.647393] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 0.647396] pci 0000:02:01.0: IO window: 0x00a000-0x00a0ff
[ 0.647403] pci 0000:02:01.0: IO window: 0x00a400-0x00a4ff
[ 0.647411] pci 0000:02:01.0: PREFETCH window: 0x24000000-0x27ffffff
[ 0.647418] pci 0000:02:01.0: MEM window: 0x28000000-0x2bffffff
[ 0.647426] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.647430] pci 0000:00:14.4: IO window: 0xa000-0xbfff
[ 0.647439] pci 0000:00:14.4: MEM window: 0xfe200000-0xfeafffff
[ 0.647446] pci 0000:00:14.4: PREFETCH window: 0x000000ddf00000-0x000000dfefffff
[ 0.647482] pci 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.647491] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.647494] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.647497] bus: 01 index 0 io port: [0x9000-0x9fff]
[ 0.647500] bus: 01 index 1 mmio: [0xfe100000-0xfe1fffff]
[ 0.647503] bus: 01 index 2 mmio: [0xbdf00000-0xddefffff]
[ 0.647506] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.647508] bus: 02 index 0 io port: [0xa000-0xbfff]
[ 0.647511] bus: 02 index 1 mmio: [0xfe200000-0xfeafffff]
[ 0.647514] bus: 02 index 2 mmio: [0xddf00000-0xdfefffff]
[ 0.647517] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.647519] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[ 0.647522] bus: 03 index 0 io port: [0xa000-0xa0ff]
[ 0.647525] bus: 03 index 1 io port: [0xa400-0xa4ff]
[ 0.647528] bus: 03 index 2 mmio: [0x24000000-0x27ffffff]
[ 0.647531] bus: 03 index 3 mmio: [0x28000000-0x2bffffff]
[ 0.647544] NET: Registered protocol family 2
[ 0.660076] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.660364] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.660486] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.660608] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.660612] TCP reno registered
[ 0.668089] NET: Registered protocol family 1
[ 0.668240] checking if image is initramfs... it is
[ 1.144569] Switched to high resolution mode on CPU 1
[ 1.148056] Switched to high resolution mode on CPU 0
[ 1.481932] Freeing initrd memory: 7404k freed
[ 1.482002] Simple Boot Flag at 0xff set to 0x1
[ 1.482305] cpufreq: No nForce2 chipset.
[ 1.482527] audit: initializing netlink socket (disabled)
[ 1.482570] type=2000 audit(1242493514.481:1): initialized
[ 1.491839] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.493638] VFS: Disk quotas dquot_6.5.1
[ 1.493716] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.494520] fuse init (API version 7.10)
[ 1.494629] msgmni has been set to 740
[ 1.494887] alg: No test for stdrng (krng)
[ 1.494905] io scheduler noop registered
[ 1.494908] io scheduler anticipatory registered
[ 1.494911] io scheduler deadline registered
[ 1.494931] io scheduler cfq registered (default)
[ 1.544048] pci 0000:01:05.0: Boot video device
[ 1.547437] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.547449] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.547668] ACPI: AC Adapter [AC0] (on-line)
[ 1.547826] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.547921] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.547924] ACPI: Power Button (FF) [PWRF]
[ 1.547991] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/PNP0C09:00/PNP0C0D:00/input/input1
[ 1.548202] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.549727] ACPI: Lid Switch [LID]
[ 1.549806] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.549817] ACPI: Power Button (CM) [PWRB]
[ 1.549873] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.549880] ACPI: Sleep Button (CM) [SLPB]
[ 1.550463] ACPI: SSDT 17FD75E0, 0F84 (r1 AMI CPU1PM 1 INTL 20051117)
[ 1.559853] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.559885] processor ACPI_CPU:00: registered as cooling_device0
[ 1.559890] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.560135] ACPI: SSDT 17FD8570, 0DAC (r1 AMI CPU2PM 1 INTL 20051117)
[ 1.561131] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.561156] processor ACPI_CPU:01: registered as cooling_device1
[ 1.561161] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.567746] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.568854] ACPI: Thermal Zone [THRM] (55 C)
[ 1.568917] isapnp: Scanning for PnP cards...
[ 1.923394] isapnp: No Plug & Play device found
[ 1.936175] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.936351] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.937654] brd: module loaded
[ 1.938047] loop: module loaded
[ 1.938138] Fixed MDIO Bus: probed
[ 1.938145] PPP generic driver version 2.4.2
[ 1.938231] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.938269] Driver 'sd' needs updating - please use bus_type methods
[ 1.938287] Driver 'sr' needs updating - please use bus_type methods
[ 1.938616] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.938675] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.938806] scsi0 : pata_atiixp
[ 1.938943] scsi1 : pata_atiixp
[ 1.940643] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.940647] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.104901] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100
[ 2.104905] ata1.00: 156301488 sectors, multi 16: LBA48
[ 2.120845] ata1.00: configured for UDMA/100
[ 2.284679] ata2.01: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
[ 2.300672] ata2.01: configured for UDMA/33
[ 2.301202] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4O PQ: 0 ANSI: 5
[ 2.301327] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.301350] sd 0:0:0:0: [sda] Write Protect is off
[ 2.301353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.301388] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.301469] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.301488] sd 0:0:0:0: [sda] Write Protect is off
[ 2.301491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.301523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.301528] sda: sda1 sda2 sda3 < sda5 >
[ 2.356324] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.356388] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.358342] scsi 1:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.21 PQ: 0 ANSI: 5
[ 2.362722] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.362726] Uniform CD-ROM driver Revision: 3.20
[ 2.362846] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 2.362896] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 2.363455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.363486] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.363523] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.363597] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 2.363667] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfebfd000
[ 2.372012] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.372120] usb usb1: configuration #1 chosen from 1 choice
[ 2.372154] hub 1-0:1.0: USB hub found
[ 2.372165] hub 1-0:1.0: 8 ports detected
[ 2.372319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.372337] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.372351] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.372417] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.372436] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfebff000
[ 2.432071] usb usb2: configuration #1 chosen from 1 choice
[ 2.432102] hub 2-0:1.0: USB hub found
[ 2.432116] hub 2-0:1.0: 4 ports detected
[ 2.432231] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.432245] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.432297] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 2.432316] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfe000
[ 2.492076] usb usb3: configuration #1 chosen from 1 choice
[ 2.492112] hub 3-0:1.0: USB hub found
[ 2.492126] hub 3-0:1.0: 4 ports detected
[ 2.492240] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.492312] usbcore: registered new interface driver libusual
[ 2.492351] usbcore: registered new interface driver usbserial
[ 2.492369] USB Serial support registered for generic
[ 2.492385] usbcore: registered new interface driver usbserial_generic
[ 2.492388] usbserial: USB Serial Driver core
[ 2.492455] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.494906] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.496090] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.496098] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.496101] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.496106] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.496109] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.500056] mice: PS/2 mouse device common for all mice
[ 2.520097] rtc_cmos 00:02: RTC can wake from S4
[ 2.520143] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.520176] rtc0: alarms up to one month, 114 bytes nvram
[ 2.520256] device-mapper: uevent: version 1.0.3
[ 2.520392] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.520514] device-mapper: multipath: version 1.0.5 loaded
[ 2.520517] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.520630] EISA: Probing bus 0 at eisa.0
[ 2.520657] Cannot allocate resource for EISA slot 4
[ 2.520681] EISA: Detected 0 cards.
[ 2.520833] cpuidle: using governor ladder
[ 2.520950] cpuidle: using governor menu
[ 2.521590] TCP cubic registered
[ 2.521723] NET: Registered protocol family 10
[ 2.522271] lo: Disabled Privacy Extensions
[ 2.522695] NET: Registered protocol family 17
[ 2.522718] Bluetooth: L2CAP ver 2.11
[ 2.522720] Bluetooth: L2CAP socket layer initialized
[ 2.522724] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.522726] Bluetooth: SCO socket layer initialized
[ 2.522754] Marking TSC unstable due to TSC halts in idle
[ 2.522786] Bluetooth: RFCOMM socket layer initialized
[ 2.522795] Bluetooth: RFCOMM TTY layer initialized
[ 2.522797] Bluetooth: RFCOMM ver 1.10
[ 2.536228] Using IPI No-Shortcut mode
[ 2.536338] registered taskstats version 1
[ 2.536468] Magic number: 9:511:87
[ 2.536538] button LNXPWRBN:00: hash matches
[ 2.536598] rtc_cmos 00:02: setting system clock to 2009-05-16 17:05:15 UTC (1242493515)
[ 2.536602] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.536605] EDD information not available.
[ 2.537122] Freeing unused kernel memory: 532k freed
[ 2.537316] Write protecting the kernel text: 4128k
[ 2.537386] Write protecting the kernel read-only data: 1532k
[ 2.552210] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.685086] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.806921] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.806975] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.810619] 8139too Fast Ethernet driver 0.9.28
[ 2.810686] 8139too 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.812721] eth0: RealTek RTL8139 at 0xb800, 00:1a:92:27:58:d6, IRQ 20
[ 2.812724] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.826905] usb 1-1: configuration #1 chosen from 1 choice
[ 2.881337] b43-pci-bridge 0000:02:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.940135] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
[ 3.185669] PM: Starting manual resume from disk
[ 3.185674] PM: Resume from partition 8:1
[ 3.185676] PM: Checking hibernation image.
[ 3.185930] PM: Resume from disk failed.
[ 3.189251] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.189255] EXT3-fs: write access will be enabled during recovery.
[ 3.296096] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 3.515308] usb 3-2: configuration #1 chosen from 1 choice
[ 3.524306] usbcore: registered new interface driver hiddev
[ 3.532548] input: Microsoft Microsoft Wheel Mouse Optical╝ as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input6
[ 3.536115] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical╝] on usb-0000:00:13.1-2/input0
[ 3.536140] usbcore: registered new interface driver usbhid
[ 3.536144] usbhid: v2.6:USB HID core driver
[ 3.820072] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 4.027190] usb 2-2: configuration #1 chosen from 1 choice
[ 33.816117] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 33.816173] ata1.00: cmd ca/00:08:53:95:6f/00:00:00:00:00/e4 tag 0 dma 4096 out
[ 33.816175] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 33.816266] ata1.00: status: { DRDY }
[ 33.816344] ata1: soft resetting link
[ 33.996909] ata1.00: configured for UDMA/100
[ 33.996926] ata1: EH complete
[ 33.997472] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 33.997719] sd 0:0:0:0: [sda] Write Protect is off
[ 33.997722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.998171] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.998508] kjournald starting. Commit interval 5 seconds
[ 33.998551] EXT3-fs: recovery complete.
[ 33.999031] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.303833] udev: starting version 141
[ 40.775125] acpi device:04: registered as cooling_device2
[ 40.775335] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input7
[ 40.785172] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 40.852589] parport_pc 00:06: reported by Plug and Play ACPI
[ 40.852631] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 41.263008] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 41.279421] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x2676
[ 41.279466] usbcore: registered new interface driver usblp
[ 41.292160] ppdev: user-space parallel port driver
[ 41.319142] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.335034] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 41.363642] yenta_cardbus 0000:02:01.0: CardBus bridge found [1043:1397]
[ 41.366662] sdhci: Secure Digital Host Controller Interface driver
[ 41.366666] sdhci: Copyright© Pierre Ossman
[ 41.428032] Linux agpgart interface v0.103
[ 41.466075] asus-laptop: Asus Laptop Support version 0.42
[ 41.470631] asus-laptop: BSTS called, 0x7f returned
[ 41.470696] asus-laptop: A6Rp model detected
[ 41.495104] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0e38, PCI irq 16
[ 41.495113] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 41.495119] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 41.495133] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
[ 41.495138] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xbfff: clean.
[ 41.495774] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff
[ 41.495779] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
[ 41.496682] sdhci-pci 0000:02:01.1: SDHCI controller found [1180:0822] (rev 17)
[ 41.496715] sdhci-pci 0000:02:01.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 41.499885] mmc0: SDHCI controller on PCI [0000:02:01.1] using PIO
[ 41.537984] asus-laptop: Brightness ignored, must be controlled by ACPI video driver
[ 41.538131] Registered led device: asus::mail
[ 41.568423] cfg80211: Calling CRDA to update world regulatory domain
[ 41.611993] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 41.650925] cfg80211: World regulatory domain updated:
[ 41.650929] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 41.650933] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 41.650937] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 41.650940] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 41.650943] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 41.650946] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 41.812971] b43-phy0: Broadcom 4318 WLAN found
[ 41.882177] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 41.884747] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 41.885586] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 41.886006] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 41.886956] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 41.889413] phy0: Selected rate control algorithm 'pid'
[ 42.013782] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 42.057243] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 42.502354] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 42.542052] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 42.766485] lp0: using parport0 (interrupt-driven).
[ 42.866720] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k
[ 43.313667] EXT3 FS on sda2, internal journal
[ 43.903130] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 44.669375] type=1505 audit(1242493557.631:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2047
[ 44.669620] type=1505 audit(1242493557.631:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2047
[ 44.669700] type=1505 audit(1242493557.631:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2047
[ 44.669765] type=1505 audit(1242493557.631:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2047
[ 44.862293] type=1505 audit(1242493557.824:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2052
[ 44.862702] type=1505 audit(1242493557.824:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2052
[ 44.901598] type=1505 audit(1242493557.864:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2056
[ 49.545246] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 49.545252] Bluetooth: BNEP filters: protocol multicast
[ 49.597409] Bridge firewalling registered
[ 51.283552] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 51.480463] [drm] Initialized drm 1.1.0 20060810
[ 51.534769] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 52.248833] [drm] Setting GART location based on new memory map
[ 52.249626] [drm] Loading R300 Microcode
[ 52.249674] [drm] Num pipes: 3
[ 52.249682] [drm] writeback test succeeded in 1 usecs
[ 53.806319] ppdev0: registered pardevice
[ 53.852295] ppdev0: unregistered pardevice
[ 55.037923] eth0: link down
[ 55.038067] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 55.090474] input: b43-phy0 as /devices/virtual/input/input10
[ 55.140097] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 55.288724] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 55.362683] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 55.413715] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 55.632791] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 55.681464] Registered led device: b43-phy0::tx
[ 55.681488] Registered led device: b43-phy0::rx
[ 55.681512] Registered led device: b43-phy0::assoc
[ 55.681539] Registered led device: b43-phy0::radio
[ 55.717223] b43-phy0: Radio turned on by software
[ 55.717462] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Приступов может быть несколько, точка переменная, происходят только при старте и включении.
После запуска иксов, все работает как бы нормально, но немного медленно...
elena@berkut:~/Рабочий стол$ sudo dd if=/dev/sda2 of=/dev/null bs=200MB count=1
1+0 записей считано
1+0 записей написано
скопировано 200000000 байт (200 MB), 22,0121 c, 9,1 MB/c
Геометрия(fdisk -l):
Код:
Диск /dev/sda: 80.0 ГБ, 80026361856 байт
255 heads, 63 sectors/track, 9729 cylinders
Units = цилиндры of 16065 * 512 = 8225280 bytes
Disk identifier: 0xd53d826f
Устр-во Загр Начало Конец Блоки Id Система
/dev/sda1 1 243 1951866 82 Linux своп / Solaris
/dev/sda2 * 244 5941 45769185 83 Linux
/dev/sda3 5942 9729 30427110 f W95 расшир. (LBA)
/dev/sda5 5942 9729 30427078+ b W95 FAT32
Протестировал smartctl, сделав полный (long) тест и помотав жд весь день. Вроде ничего сбойного нет.
Код:
smartctl version 5.38 [i686-pc-linux-gnu] Copyright © 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K100 series
Device Model: HTS541080G9AT00
Serial Number: MPB4LAXNGXS7HM
Firmware Version: MB4OA60A
User Capacity: 80 026 361 856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Sat May 16 21:11:08 2009 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 55) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 106 106 040 Pre-fail Offline - 4556
3 Spin_Up_Time 0x0007 168 168 033 Pre-fail Always - 2
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 666
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 118 118 040 Pre-fail Offline - 41
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 594
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 662
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 30
193 Load_Cycle_Count 0x0012 096 096 000 Old_age Always - 41258
194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 44 (Lifetime Min/Max 9/55)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 549 -
# 2 Short offline Completed without error 00% 548 -
# 3 Extended offline Aborted by host 90% 548 -
# 4 Extended offline Interrupted (host reset) 90% 548 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
hdparm -iI /dev/sda:
Код:
/dev/sda:
Model=HTS541080G9AT00 , FwRev=MB4OA60A, SerialNo= MPB4LAXNGXS7HM
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7539kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a: ATA/ATAPI-2,3,4,5,6
* signifies the current active mode
ATA device, with non-removable media
Model Number: HTS541080G9AT00
Serial Number: MPB4LAXNGXS7HM
Firmware Revision: MB4OA60A
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 3a
Supported: 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156301488
LBA48 user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
Address Offset Reserved Area Boot
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
52min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
Инфа об аппаратуре(Core T2060, Ati Radeon xpress 200M, 512 Мб рама - из них 128 ест видео, чипсет ати)
lshw:
Код:
berkut
description: Notebook
product: A6Rp
vendor: ASUSTeK Computer Inc.
version: 1.0
serial: SSN12345678901234567
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration: boot=normal chassis=notebook uuid=F73781DB-9F2B-5BCA-F780-001A922758D6
*-core
description: Motherboard
product: A6Rp
vendor: ASUSTeK Computer Inc.
physical id: 0
version: 1.0
serial: BSN12345678901234567
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 213 (02/07/2007)
size: 64KiB
capacity: 448KiB
capabilities: isa pci pcmcia pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: Genuine Intel® CPU T2060 @ 1.60GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.14.12
serial: 0000-06EC-0000-0000-0000-0000
slot: CPU 1
size: 798MHz
capacity: 798MHz
width: 32 bits
clock: 133MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor est tm2 xtpr pdcm cpufreq
configuration: id=1
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 64KiB
capacity: 64KiB
capabilities: internal write-back data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 1MiB
capacity: 1MiB
capabilities: internal write-back instruction
*-logicalcpu:0
description: Logical CPU
physical id: 1.1
width: 32 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 1.2
width: 32 bits
capabilities: logical
*-memory
description: System Memory
physical id: 1b
slot: System board or motherboard
size: 512MiB
capacity: 1GiB
*-bank:0
description: DIMM DDR Synchronous
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 512MiB
width: 64 bits
*-bank:1
description: DIMM [empty]
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
*-pci
description: Host bridge
product: ATI Technologies Inc
vendor: ATI Technologies Inc
physical id: 100
bus info: pci@0000:00:00.0
version: 01
width: 64 bits
clock: 66MHz
configuration: latency=64
*-pci:0
description: PCI bridge
product: RS480 PCI Bridge
vendor: ATI Technologies Inc
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci bus_master cap_list
*-display UNCLAIMED
description: VGA compatible controller
product: RC410 [Radeon Xpress 200M]
vendor: ATI Technologies Inc
physical id: 5
bus info: pci@0000:01:05.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm msi bus_master cap_list
configuration: latency=64 mingnt=8
*-usb:0
description: USB Controller
product: IXP SB400 USB Host Controller
vendor: ATI Technologies Inc
physical id: 13
bus info: pci@0000:00:13.0
version: 80
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
*-usb:1
description: USB Controller
product: IXP SB400 USB Host Controller
vendor: ATI Technologies Inc
physical id: 13.1
bus info: pci@0000:00:13.1
version: 80
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
*-usb:2
description: USB Controller
product: IXP SB400 USB2 Host Controller
vendor: ATI Technologies Inc
physical id: 13.2
bus info: pci@0000:00:13.2
version: 80
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=ehci_hcd latency=64 module=ehci_hcd
*-serial
description: SMBus
product: IXP SB400 SMBus Controller
vendor: ATI Technologies Inc
physical id: 14
bus info: pci@0000:00:14.0
version: 82
width: 32 bits
clock: 66MHz
configuration: driver=piix4_smbus latency=0 module=i2c_piix4
*-ide
description: IDE interface
product: IXP SB400 IDE Controller
vendor: ATI Technologies Inc
physical id: 14.1
bus info: pci@0000:00:14.1
logical name: scsi0
logical name: scsi1
version: 80
width: 32 bits
clock: 66MHz
capabilities: ide msi bus_master cap_list emulated
configuration: driver=pata_atiixp latency=64
*-disk
description: ATA Disk
product: HTS541080G9AT00
vendor: Hitachi
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: MB4O
serial: MPB4LAXNGXS7HM
size: 74GiB (80GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=d53d826f
*-volume:0
description: Linux swap volume
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
version: 1
serial: 86f443f5-1c1e-4cdf-bbf5-847f1b80d7a0
size: 1906MiB
capacity: 1906MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:1
description: EXT3 volume
vendor: Linux
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
logical name: /
version: 1.0
serial: 1cffd031-9e3a-4d83-9967-4c1a8183959c
size: 43GiB
capacity: 43GiB
capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2009-05-09 02:10:20 filesystem=ext3 modified=2009-05-16 21:05:56 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2009-05-16 21:05:56 state=mounted
*-volume:2
description: Extended partition
physical id: 3
bus info: scsi@0:0.0.0,3
logical name: /dev/sda3
size: 29GiB
capacity: 29GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: W95 FAT32 partition
physical id: 5
logical name: /dev/sda5
logical name: /media/sda5
capacity: 29GiB
configuration: mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,uid=1000,gid=1000,fmask=0022,dmask=0022,cod
epage=cp866,iocharset=utf8 state=mounted
*-cdrom
description: DVD-RAM writer
product: DVD-RAM UJ-850S
vendor: MATSHITA
physical id: 0.1.0
bus info: scsi@1:0.1.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
version: 1.21
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-multimedia
description: Audio device
product: IXP SB4x0 High Definition Audio Controller
vendor: ATI Technologies Inc
physical id: 14.2
bus info: pci@0000:00:14.2
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=HDA Intel latency=64 module=snd_hda_intel
*-isa
description: ISA bridge
product: IXP SB400 PCI-ISA Bridge
vendor: ATI Technologies Inc
physical id: 14.3
bus info: pci@0000:00:14.3
version: 80
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:1
description: PCI bridge
product: IXP SB400 PCI-PCI Bridge
vendor: ATI Technologies Inc
physical id: 14.4
bus info: pci@0000:00:14.4
version: 80
width: 32 bits
clock: 66MHz
capabilities: pci bus_master
*-network:0
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 10
serial: 00:1a:92:27:58:d6
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.3 latency=64 link=yes maxlatency=64 mingnt=32 module=8139too multicast=yes port=MII speed=100MB/s
*-pcmcia
description: CardBus bridge
product: RL5c476 II
vendor: Ricoh Co Ltd
physical id: 1
bus info: pci@0000:02:01.0
version: b3
width: 64 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket
resources: iomemory:b00603020-b0060301f
*-system:0
description: SD Host controller
product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
vendor: Ricoh Co Ltd
physical id: 1.1
bus info: pci@0000:02:01.1
version: 17
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=sdhci-pci latency=64 module=sdhci_pci
*-system:1 UNCLAIMED
description: System peripheral
product: R5C592 Memory Stick Bus Host Adapter
vendor: Ricoh Co Ltd
physical id: 1.2
bus info: pci@0000:02:01.2
version: 08
width: 32 bits
clock: 33MHz
capabilities: pm cap_list
configuration: latency=0
*-network:1
description: Network controller
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:02:03.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=64 module=ssb
*-network:0 DISABLED
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:18:f3:9d:3c:15
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
*-network:1 DISABLED
description: Ethernet interface
physical id: 2
logical name: pan0
serial: ba:32:60:86:1b:e2
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
lspci -vv:
Код:
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
Subsystem: ATI Technologies Inc Device 5a31
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Kernel modules: ati-agp
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: bdf00000-ddefffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device 1397
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device 1397
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device 1397
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
Subsystem: ASUSTeK Computer Inc. Device 1397
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Region 1: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device 1397
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
Subsystem: ASUSTeK Computer Inc. Device 1393
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe200000-feafffff
Prefetchable memory behind bridge: ddf00000-dfefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
Subsystem: ASUSTeK Computer Inc. Device 1392
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9800 [size=256]
Region 2: Memory at fe1f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe1c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 1045
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
Subsystem: ASUSTeK Computer Inc. Device 1397
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 24000000-27fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 0000a000-0000a0ff
I/O window 1: 0000a400-0000a4ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
Subsystem: ASUSTeK Computer Inc. Device 1397
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
Subsystem: ASUSTeK Computer Inc. Device 1397
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 5
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 120f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
Блин
