что-то с USB моим стало...

Выбор и настройка HardWare

Модератор: Модераторы разделов

Аватара пользователя
Doka
Сообщения: 715
Статус: ASIC Design Engineer
ОС: RHEL4

что-то с USB моим стало...

Сообщение Doka »

система - CentOS 5.3

Код: Выделить всё

$ uname -a
Linux conroe 2.6.18-128.2.1.el5 #1 SMP Tue Jul 14 06:36:37 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux


после перезагрузки почему-то не принимаются ни SATA-to-USB ни USB-флешки:
(логи последовательного втыкания SATA-to-USB и USB-флеш из порта в порт)

Код: Выделить всё

[doka@conroe ~]$ sudo tail -f /var/log/messages
Jul 24 22:14:08 conroe kernel: usb 1-4: device descriptor read/64, error -32
Jul 24 22:14:09 conroe kernel: usb 1-4: new high speed USB device using ehci_hcd and address 13
Jul 24 22:14:09 conroe kernel: usb 1-4: device descriptor read/64, error -32
Jul 24 22:14:09 conroe kernel: usb 1-4: device descriptor read/64, error -32
Jul 24 22:14:09 conroe kernel: usb 1-4: new high speed USB device using ehci_hcd and address 14
Jul 24 22:14:10 conroe kernel: usb 1-4: device not accepting address 14, error -32
Jul 24 22:14:10 conroe kernel: usb 1-4: new high speed USB device using ehci_hcd and address 15
Jul 24 22:14:10 conroe kernel: usb 1-4: device not accepting address 15, error -32

Jul 24 22:15:07 conroe kernel: usb 1-4: new high speed USB device using ehci_hcd and address 16
Jul 24 22:15:07 conroe kernel: usb 1-4: device descriptor read/64, error -32
Jul 24 22:15:07 conroe kernel: usb 1-4: device descriptor read/64, error -32
Jul 24 22:15:08 conroe kernel: usb 1-4: new high speed USB device using ehci_hcd and address 17
Jul 24 22:15:08 conroe kernel: usb 1-4: device descriptor read/64, error -32
Jul 24 22:15:08 conroe kernel: usb 1-4: device descriptor read/64, error -32
Jul 24 22:15:08 conroe kernel: usb 1-4: new high speed USB device using ehci_hcd and address 18
Jul 24 22:15:09 conroe kernel: usb 1-4: device not accepting address 18, error -32
Jul 24 22:15:09 conroe kernel: usb 1-4: new high speed USB device using ehci_hcd and address 19
Jul 24 22:15:09 conroe kernel: usb 1-4: device not accepting address 19, error -32

Jul 24 22:15:50 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 20
Jul 24 22:15:50 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:15:51 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 22
Jul 24 22:15:52 conroe kernel: hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
Jul 24 22:15:52 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 23
Jul 24 22:15:53 conroe kernel: hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
Jul 24 22:15:53 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 24
Jul 24 22:15:53 conroe kernel: usb 1-1: device not accepting address 24, error -32
Jul 24 22:15:54 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 25
Jul 24 22:15:54 conroe kernel: usb 1-1: device not accepting address 25, error -32

Jul 24 22:16:11 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 27
Jul 24 22:16:16 conroe kernel: usb 1-3: new high speed USB device using ehci_hcd and address 28
Jul 24 22:16:16 conroe kernel: usb 1-3: device descriptor read/64, error -32
Jul 24 22:16:16 conroe kernel: usb 1-3: device descriptor read/64, error -32
Jul 24 22:16:16 conroe kernel: usb 1-3: new high speed USB device using ehci_hcd and address 29
Jul 24 22:16:16 conroe kernel: usb 1-3: device descriptor read/64, error -32
Jul 24 22:16:16 conroe kernel: usb 1-3: device descriptor read/64, error -32
Jul 24 22:16:17 conroe kernel: usb 1-3: new high speed USB device using ehci_hcd and address 30
Jul 24 22:16:17 conroe kernel: usb 1-3: device not accepting address 30, error -32
Jul 24 22:16:17 conroe kernel: usb 1-3: new high speed USB device using ehci_hcd and address 31
Jul 24 22:16:18 conroe kernel: usb 1-3: device not accepting address 31, error -32

Jul 24 22:16:58 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 32
Jul 24 22:16:58 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:16:58 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:16:58 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 33
Jul 24 22:16:58 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:16:58 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:16:59 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 34
Jul 24 22:16:59 conroe kernel: usb 1-1: device not accepting address 34, error -32
Jul 24 22:16:59 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 35
Jul 24 22:17:00 conroe kernel: usb 1-1: device not accepting address 35, error -32


Jul 24 22:22:07 conroe kernel: usb 1-3: device descriptor read/64, error -32
Jul 24 22:22:08 conroe kernel: usb 1-3: device descriptor read/64, error -32
Jul 24 22:22:08 conroe kernel: usb 1-3: new high speed USB device using ehci_hcd and address 37
Jul 24 22:22:08 conroe kernel: usb 1-3: device descriptor read/64, error -32
Jul 24 22:22:08 conroe kernel: usb 1-3: device descriptor read/64, error -32
Jul 24 22:22:08 conroe kernel: usb 1-3: new high speed USB device using ehci_hcd and address 38
Jul 24 22:22:09 conroe kernel: usb 1-3: device not accepting address 38, error -32
Jul 24 22:22:09 conroe kernel: usb 1-3: new high speed USB device using ehci_hcd and address 39
Jul 24 22:22:09 conroe kernel: usb 1-3: device not accepting address 39, error -32
Jul 24 22:22:45 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 40
Jul 24 22:22:45 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:22:46 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:22:46 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 41
Jul 24 22:22:46 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:22:46 conroe kernel: usb 1-1: device descriptor read/64, error -32
Jul 24 22:22:46 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 42
Jul 24 22:22:47 conroe kernel: usb 1-1: device not accepting address 42, error -32
Jul 24 22:22:47 conroe kernel: usb 1-1: new high speed USB device using ehci_hcd and address 43


до этого всё работало..
кто виноват? что делать?
Never stop thinking..................................................................
Спасибо сказали:
Аватара пользователя
Doka
Сообщения: 715
Статус: ASIC Design Engineer
ОС: RHEL4

Re: что-то с USB моим стало...

Сообщение Doka »

откатился назад на ядро 2.6.18-128.1.14.el5

странные вещи - тоже USB-флеш не работают (хотя работали)
более того - в момент вставки флешки система виснет намертво

комп имеет картридер в 3,5" отсеке

вот что пишет на этапе загрузки:




как диагностировать хоть в чём дело??
У вас нет необходимых прав для просмотра вложений в этом сообщении.
Never stop thinking..................................................................
Спасибо сказали:
Аватара пользователя
devilr
Сообщения: 3697
ОС: Mandriva => Gentoo (~amd64)

Re: что-то с USB моим стало...

Сообщение devilr »

Контроллер умер. Или кабель. Или разъем. Или сам втыкаемый USB-девайс.
Данных мало... а гадать можно долго.
Допустим, ваша флешка на другом компьютере работает?
Мудрость приходит с возрастом.
Иногда возраст приходит один.
Эхо разума
Спасибо сказали:
Аватара пользователя
Doka
Сообщения: 715
Статус: ASIC Design Engineer
ОС: RHEL4

Re: что-то с USB моим стало...

Сообщение Doka »

devilr писал(а):
30.07.2009 14:19
Контроллер умер. Или кабель. Или разъем. Или сам втыкаемый USB-девайс.
Данных мало... а гадать можно долго.
Допустим, ваша флешка на другом компьютере работает?

да . на др.компе всё работе.
более того проверялись два (а учитывая встроенный картридер - три) девайса: SATA-to-USB и USB-флеш
USB-радиомышь работает на этом компе..

такое ощущение, что дело именно в софте
Never stop thinking..................................................................
Спасибо сказали:
Аватара пользователя
devilr
Сообщения: 3697
ОС: Mandriva => Gentoo (~amd64)

Re: что-то с USB моим стало...

Сообщение devilr »

Если уверены, что дело именно в софте - зачем гадать?
Берете любой liveCD (хотя бы knoppix) грузитесь с него и смотрите ваши девайсы. Если ошибка пропадет - дело действительно в софте, если нет - это железо.
Ну а дальше будем копать, если это софтовая проблема.
Мудрость приходит с возрастом.
Иногда возраст приходит один.
Эхо разума
Спасибо сказали:
Аватара пользователя
Doka
Сообщения: 715
Статус: ASIC Design Engineer
ОС: RHEL4

Re: что-то с USB моим стало...

Сообщение Doka »

увы, к жестокому разочарованию на LiveCD вылезла эта же беда((((
выходит что-то стряслось с железом...

странно как-то USB-радимышь работает без проблем, а вот те кому требуется ehci_hcd - не могут назначить адрес...

видимо пора менять железо..
Never stop thinking..................................................................
Спасибо сказали: