xulrunner-1.9.1.1-r1.ebuild

[squall]

вобщем проблема у меня в следующем решил я пересобрать gentoo и на шаге установки гнома

ante-desktop / # emerge gnome-base/gnome-light

Calculating dependencies... done!

>>> Verifying ebuild manifests

!!! A file listed in the Manifest could not be found: /usr/portage/net-libs/xulrunner/xulrunner-1.9.1.1-r1.ebuild

пробовал делать
# echo '=net-libs/xulrunner-1.9.1.1-r1' >> /etc/portage/package.mask

результат тот же..
пожалуйста помогите.

[trancefer]

Не найден сам ебилд, и зачем спрашивается вы его маскируете?
Размаскируйте пакет, обновите дерево (emerge --sync) и попробуйте заново.

[NemesisSOAD]

fixpackages. Если уж совсем плохо - emerge --websync.

[squall]

собственно что-то я действительно сглупил ) проблема была в портежалх .переключился на другие и пошло дело только вот проблема теперь в другом

Код:

make[3]: Leaving directory `/var/tmp/portage/gnome-extra/gnome-user-docs-2.24.2-r1/work/gnome-user-docs-2.24.2/gnome2-user-guide' make[2]: *** [install-data-am] Ошибка 2 make[2]: Leaving directory `/var/tmp/portage/gnome-extra/gnome-user-docs-2.24.2-r1/work/gnome-user-docs-2.24.2/gnome2-user-guide' make[1]: *** [install-am] Ошибка 2 make[1]: Leaving directory `/var/tmp/portage/gnome-extra/gnome-user-docs-2.24.2-r1/work/gnome-user-docs-2.24.2/gnome2-user-guide' make: *** [install-recursive] Ошибка 1 * * ERROR: gnome-extra/gnome-user-docs-2.24.2-r1 failed. * Call stack: * ebuild.sh, line 49: Called src_install * environment, line 2896: Called gnome2_src_install * environment, line 2283: Called die * The specific snippet of code: * emake DESTDIR="${D}" "scrollkeeper_localstate_dir=${D}${sk_tmp_dir} " "$@" install || die "install failed"; * The die message: * install failed * * If you need support, post the topmost build error, and the call stack if relevant. * A complete build log is located at '/var/tmp/portage/gnome-extra/gnome-user-docs-2.24.2-r1/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/gnome-extra/gnome-user-docs-2.24.2-r1/temp/environment'. * >>> Failed to emerge gnome-extra/gnome-user-docs-2.24.2-r1, Log file: >>> '/var/tmp/portage/gnome-extra/gnome-user-docs-2.24.2-r1/temp/build.log' * Messages for package dev-libs/libsigc++-2.2.3: * To allow parallel installation of sigc++-1.0, sigc++-1.2, and sigc++2.0 * the header files are now installed in a version specific * subdirectory. Be sure to unmerge any libsigc++ versions * < 1.0.4 that you may have previously installed. * Messages for package gnome-extra/evolution-data-server-2.24.5-r3: * * LDAP schemas needed by evolution are installed in /etc/openldap/schema * Messages for package x11-libs/libxklavier-3.6: * Please note that the soname of the library changed! * If you are upgrading from a version prior to 3.4 you need * to fix dynamic linking inconsistencies by executing: * revdep-rebuild --library libxklavier.so.11 * Messages for package app-text/enchant-1.4.2: * Starting with enchant-1.4.0 default spell checking engine has changed * from aspell to hunspell. In case you used aspell dictionaries to * check spelling you need either reemerge enchant with aspell USE flag * or you need to emerge myspell-<lang> dictionaries. * aspell is faster but has less features then hunspell and most * distributions by default use hunspell only. Nevertheless in Gentoo * it's still your choice which library to use... * Messages for package sys-devel/gdb-6.8-r1: * Sorry, but gdb does not support the LINGUAS: ru * Messages for package dev-libs/libcdio-0.80: * If you've upgraded from a previous version of libcdio, you may need to re-emerge * packages that linked against libcdio (vlc, vcdimager and more) by running: * revdep-rebuild * Messages for package dev-libs/cyrus-sasl-2.1.23: * You have both the 'gdbm' and 'berkdb' USE flags enabled. * Will default to GNU DB as your SASLdb database backend. * If you want to build with BerkeleyDB support, hit Control-C now, * change your USE flags -gdbm and emerge again. * Waiting 10 seconds before starting ... * (Control-C to abort) ... * Messages for package x11-libs/qt-3.3.8b-r1: * After a rebuild of Qt, it can happen that Qt plugins (such as Qt/KDE styles, * or widgets for the Qt designer) are no longer recognized. If this situation * occurs you should recompile the packages providing these plugins, * and you should also make sure that Qt and its plugins were compiled with the * same version of GCC. Packages that may need to be rebuilt are, for instance, * kde-base/kdelibs, kde-base/kdeartwork and kde-base/kdeartwork-styles. * See http://doc.trolltech.com/3.3/plugins-howto.html for more infos. * Messages for package media-libs/gst-plugins-good-0.10.14: * The Gstreamer plugins setup has changed quite a bit on Gentoo, * applications now should provide the basic plugins needed. * The new seperate plugins are all named 'gst-plugins-<plugin>'. * To get a listing of currently available plugins execute 'emerge -s gst-plugins-'. * In most cases it shouldn't be needed though to emerge extra plugins. * Messages for package app-admin/sudo-1.7.1-r1: * * sudo uses the /etc/ldap.conf.sudo file for ldap configuration. * * Messages for package app-crypt/pinentry-0.7.5: * We no longer install pinentry-curses and pinentry-qt SUID root by default. * Linux kernels >=2.6.9 support memory locking for unprivileged processes. * The soft resource limit for memory locking specifies the limit an * unprivileged process may lock into memory. You can also use POSIX * capabilities to allow pinentry to lock memory. To do so activate the caps * USE flag and add the CAP_IPC_LOCK capability to the permitted set of * your users. * Messages for package app-cdr/dvd+rw-tools-7.1-r1: * When you run growisofs if you receive: * unable to anonymously mmap 33554432: Resource temporarily unavailable * error message please run 'ulimit -l unlimited' * Messages for package media-libs/gst-plugins-ugly-0.10.11: * The Gstreamer plugins setup has changed quite a bit on Gentoo, * applications now should provide the basic plugins needed. * * The new seperate plugins are all named 'gst-plugins-<plugin>'. * To get a listing of currently available plugins execute 'emerge -s gst-plugins-'. * In most cases it shouldn't be needed though to emerge extra plugins. * Messages for package app-crypt/gnupg-2.0.11: * If you wish to view images emerge: * media-gfx/xloadimage, media-gfx/xli or any other viewer * Remember to use photo-viewer option in configuration file to activate * the right viewer * Messages for package app-arch/file-roller-2.24.3: * file-roller is a frontend for several archiving utilities. If you want a * particular achive format support, see http://fileroller.sourceforge.net/ * and install the relevant package. * * for example: * 7-zip - app-arch/p7zip * ace - app-arch/unace * arj - app-arch/arj * lzma - app-arch/lzma * lzop - app-arch/lzop * cpio - app-arch/cpio * iso - app-arch/cdrtools * jar,zip - app-arch/zip and app-arch/unzip * lha - app-arch/lha * rar - app-arch/unrar * rpm - app-arch/rpm * unstuff - app-arch/stuffit * zoo - app-arch/zoo * Messages for package gnome-extra/gnome-user-docs-2.24.2-r1: * * ERROR: gnome-extra/gnome-user-docs-2.24.2-r1 failed. * Call stack: * ebuild.sh, line 49: Called src_install * environment, line 2896: Called gnome2_src_install * environment, line 2283: Called die * The specific snippet of code: * emake DESTDIR="${D}" "scrollkeeper_localstate_dir=${D}${sk_tmp_dir} " "$@" install || die "install failed"; * The die message: * install failed * * If you need support, post the topmost build error, and the call stack if relevant. * A complete build log is located at '/var/tmp/portage/gnome-extra/gnome-user-docs-2.24.2-r1/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/gnome-extra/gnome-user-docs-2.24.2-r1/temp/environment'.

[squall]

эту проблему тоже преодолел но теперь появилась старая еще при сборке месяц назад...

Код:

checking GStreamer 0.10 gconfaudiosink plugin... ./configure: line 23457: 32442 Aborted $gst010_inspect $good_element > /dev/null 2> /dev/null no configure: error: Cannot find required GStreamer-0.10 plugin 'gconfaudiosink'. It should be part of gst-plugins-good. Please install it. !!! Please attach the following file when seeking support: !!! /var/tmp/portage/media-video/totem-2.26.3/work/totem-2.26.3/config.log * ERROR: media-video/totem-2.26.3 failed. * Call stack: * ebuild.sh, line 49: Called src_configure * environment, line 3165: Called gnome2_src_configure * environment, line 2359: Called econf '--disable-scrollkeeper' '--disable-schemas-install' '--disable-static' '--disable-vala' '--with-dbus' '--with-smclient' '--enable-easy-codec-installation' '--disable-browser-plugins' 'BROWSER_PLUGIN_DIR=/usr/lib/nsbrowser/plugins' 'PLUGINDIR=/usr/lib/totem/plugins' '--with-plugins=properties,thumbnail,screensaver,ontop,gromit,media-player-keys,skipto,brasero-disc-recorder,screenshot,bemused,youtube,opensubtitles,jamendo,pythonconsole' '--disable-debug' '--disable-nautilus' '--enable-python' '--disable-gtk-doc' * ebuild.sh, line 534: Called die * The specific snippet of code: * die "econf failed" * The die message: * econf failed * * If you need support, post the topmost build error, and the call stack if relevant. * A complete build log is located at '/var/tmp/portage/media-video/totem-2.26.3/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/media-video/totem-2.26.3/temp/environment'. *

[devilr]

Cannot find required GStreamer-0.10 plugin 'gconfaudiosink'.
It should be part of gst-plugins-good. Please install it.

Не найден требуемый GStreamer-0.10 плагин 'gconfaudiosink'.
Он может быть в gst-plugins-good. Пожалуйста установите это.

Вольный перевод.

[squall]

emerge gst-plugins-good 2>
и с этой разобрался нодо просто запустить dbus -
eval `dbus-launch --auto-syntax`