помогите плиз с установка Ubuntu :( (помогите плиз с установка Ubuntu :()

[lonewolf]

Всем здрасте. У меня такая проблема ( я в линукс чайник полный но решил все-таки попробовать ) . При установке Ubuntu у меня все вроде идет норм но када доходит до выбора раздела куда ставить, тут начинается,
1) он показывает что у меня всего 1 чистый диск ( на самом деле у меня он 1 разбитый на 4. На одном из стоит винда XP )
2) када запускал демо версию там лазил он там показывал все норм.
Пробовал Linux mint аналогично....установка из под вынды тоже не прокатило..

Если кто знает плиз отпишитесь.

[Rootlexx]

lonewolf
Покажите снимок того, где установщик «показывает чистый диск».
Покажите также вывод команды:

Код: Выделить всё

sudo fdisk -l

Выполните также:

Код: Выделить всё

dmesg > dmesg.txt

— и выложите файл dmesg.txt, который должен будет находиться в вашем домашнем каталоге.

[blackdevil]

А Вы при установке надеюсь выбрали разметку вручную, а не автоматическое разбиение?

[fed71]

Всем здрасте. У меня такая проблема ( я в линукс чайник полный но решил все-таки попробовать ) . При установке Ubuntu у меня все вроде идет норм но када доходит до выбора раздела куда ставить, тут начинается,
1) он показывает что у меня всего 1 чистый диск ( на самом деле у меня он 1 разбитый на 4. На одном из стоит винда XP )
2) када запускал демо версию там лазил он там показывал все норм.
Пробовал Linux mint аналогично....установка из под вынды тоже не прокатило..

Если кто знает плиз отпишитесь.

Самое первое и существенное - в системе может быть всего только 4 первичных (primary) раздела. Под линукс надо подготовить отдельный раздел. В принципе подойдет любой из имеющихся достаточного размера. При установке на него и указать. Крайне рекомендуется для начала ознакомится с процессом установки тут - http://www.interface.ru/home.asp?artId=1444

[sapog]

Здравствуйте! У меня точно такая же проблема.На днях купил новый системник:Intel Core 2 Quad/4 gb памяти/640 gb винт.Загрузился с acronisa,разметил диск:2 раздела на винду,раздел для линукса и раздел для swap.Начал установку ubuntu 9.04 и точно также показывает пустой диск.Загрузился в live-cd, вот вывод dmesg:

Код: Выделить всё

[    0.000000] BIOS EBDA/lowmem at: 0009a000/0009a000
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[    0.000000]  BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[    0.000000]  BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x100000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009a000 (usable)
[    0.000000]  modified: 000000000009a000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000cff90000 (usable)
[    0.000000]  modified: 00000000cff90000 - 00000000cff9e000 (ACPI data)
[    0.000000]  modified: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  modified: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 7f89c000 - 7ffff50d
[    0.000000] Allocated new RAMDISK: 00881000 - 00fe450d
[    0.000000] Move RAMDISK from 000000007f89c000 - 000000007ffff50c to 00881000 - 00fe450c
[    0.000000] ACPI: RSDP 000F9B50, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFF90000, 0038 (r1 091908 RSDT1312 20080919 MSFT       97)
[    0.000000] ACPI: FACP CFF90200, 0084 (r1 091908 FACP1312 20080919 MSFT       97)
[    0.000000] ACPI: DSDT CFF90440, 778F (r1  1AAAA 1AAAA000        0 INTL 20051117)
[    0.000000] ACPI: FACS CFF9E000, 0040
[    0.000000] ACPI: APIC CFF90390, 006C (r1 091908 APIC1312 20080919 MSFT       97)
[    0.000000] ACPI: MCFG CFF90400, 003C (r1 091908 OEMMCFG  20080919 MSFT       97)
[    0.000000] ACPI: OEMB CFF9E040, 0072 (r1 091908 OEMB1312 20080919 MSFT       97)
[    0.000000] ACPI: HPET CFF98440, 0038 (r1 091908 OEMHPET  20080919 MSFT       97)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2443MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]
[    0.000000]   #4 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]
[    0.000000]   #5 [000009a000 - 0000100000]    BIOS reserved ==> [000009a000 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000881000 - 0000fe450d]      NEW RAMDISK ==> [0000881000 - 0000fe450d]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00ff780] 000ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x000cff90
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x000cff90
[    0.000000] On node 0 totalpages: 851738
[    0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3946 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4888 pages used for memmap
[    0.000000]   HighMem zone: 620666 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 845082
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- debian-installer/language=ru console-setup/layoutcode?=ru
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2333.195 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 17036800 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 3346496k/3407424k available (4126k kernel code, 59576k reserved, 2208k data, 532k init, 2502216k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
[    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.39 BogoMIPS (lpj=9332780)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] using mwait in idle threads.
[    0.004000] Checking 'hlt' instruction... OK.
[    0.018164] ACPI: Core revision 20080926
[    0.020524] ACPI: Checking initramfs for custom DSDT
[    0.283828] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.323523] CPU0: Intel® Core(tm)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.324001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 4666.07 BogoMIPS (lpj=9332154)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.408420] CPU1: Intel® Core(tm)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.408432] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.412096] Booting processor 2 APIC 0x2 ip 0x6000
[    0.004000] Initializing CPU#2
[    0.004000] Calibrating delay using timer specific routine.. 4666.09 BogoMIPS (lpj=9332186)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 2
[    0.500476] CPU2: Intel® Core(tm)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.500489] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.504081] Booting processor 3 APIC 0x3 ip 0x6000
[    0.004000] Initializing CPU#3
[    0.004000] Calibrating delay using timer specific routine.. 4666.09 BogoMIPS (lpj=9332196)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 3
[    0.592477] CPU3: Intel® Core(tm)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.592491] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.596022] Brought up 4 CPUs
[    0.596024] Total of 4 processors activated (18664.65 BogoMIPS).
[    0.596075] CPU0 attaching sched-domain:
[    0.596077]  domain 0: span 0-1 level MC
[    0.596079]   groups: 0 1
[    0.596083]   domain 1: span 0-3 level CPU
[    0.596085]    groups: 0-1 2-3
[    0.596089] CPU1 attaching sched-domain:
[    0.596090]  domain 0: span 0-1 level MC
[    0.596092]   groups: 1 0
[    0.596095]   domain 1: span 0-3 level CPU
[    0.596096]    groups: 0-1 2-3
[    0.596100] CPU2 attaching sched-domain:
[    0.596101]  domain 0: span 2-3 level MC
[    0.596103]   groups: 2 3
[    0.596106]   domain 1: span 0-3 level CPU
[    0.596107]    groups: 2-3 0-1
[    0.596111] CPU3 attaching sched-domain:
[    0.596113]  domain 0: span 2-3 level MC
[    0.596114]   groups: 3 2
[    0.596117]   domain 1: span 0-3 level CPU
[    0.596118]    groups: 2-3 0-1
[    0.596222] net_namespace: 776 bytes
[    0.596222] Booting paravirtualized kernel on bare hardware
[    0.596285] Time: 23:02:26  Date: 08/02/09
[    0.596285] regulator: core version 0.5
[    0.596285] NET: Registered protocol family 16
[    0.596285] EISA bus registered
[    0.596285] ACPI: bus type pci registered
[    0.596285] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.596285] PCI: Not using MMCONFIG.
[    0.596290] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.596292] PCI: Using configuration type 1 for base access
[    0.596987] ACPI: EC: Look up EC in DSDT
[    0.609469] ACPI: Interpreter enabled
[    0.609476] ACPI: (supports S0 S1 S3 S4 S5)
[    0.609493] ACPI: Using IOAPIC for interrupt routing
[    0.609544] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.615831] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.615833] PCI: Using MMCONFIG for extended config space
[    0.626128] ACPI: No dock devices found.
[    0.626192] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.626261] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.626264] pci 0000:00:01.0: PME# disabled
[    0.626323] pci 0000:00:1a.0: reg 20 io port: [0xbc00-0xbc1f]
[    0.626375] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[    0.626428] pci 0000:00:1a.2: reg 20 io port: [0xb800-0xb81f]
[    0.626483] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff]
[    0.626516] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.626519] pci 0000:00:1a.7: PME# disabled
[    0.626554] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
[    0.626578] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.626581] pci 0000:00:1b.0: PME# disabled
[    0.626619] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.626622] pci 0000:00:1c.0: PME# disabled
[    0.626663] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.626666] pci 0000:00:1c.4: PME# disabled
[    0.626712] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f]
[    0.626765] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[    0.626818] pci 0000:00:1d.2: reg 20 io port: [0xb080-0xb09f]
[    0.626873] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff]
[    0.626906] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.626909] pci 0000:00:1d.7: PME# disabled
[    0.627038] pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007]
[    0.627043] pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03]
[    0.627048] pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887]
[    0.627052] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
[    0.627057] pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa48f]
[    0.627062] pci 0000:00:1f.2: reg 24 io port: [0xa400-0xa40f]
[    0.627092] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff]
[    0.627103] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.627138] pci 0000:00:1f.5: reg 10 io port: [0xa000-0xa007]
[    0.627143] pci 0000:00:1f.5: reg 14 io port: [0x9c00-0x9c03]
[    0.627148] pci 0000:00:1f.5: reg 18 io port: [0x9880-0x9887]
[    0.627152] pci 0000:00:1f.5: reg 1c io port: [0x9800-0x9803]
[    0.627157] pci 0000:00:1f.5: reg 20 io port: [0x9480-0x948f]
[    0.627162] pci 0000:00:1f.5: reg 24 io port: [0x9400-0x940f]
[    0.627201] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.627209] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[    0.627217] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[    0.627222] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
[    0.627227] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.627267] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[    0.627269] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff]
[    0.627273] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.627320] pci 0000:02:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff]
[    0.627328] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f]
[    0.627360] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.627365] pci 0000:02:00.0: PME# disabled
[    0.627407] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[    0.627411] pci 0000:00:1c.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.627465] pci 0000:03:00.0: reg 10 io port: [0xec00-0xec07]
[    0.627473] pci 0000:03:00.0: reg 14 io port: [0xe880-0xe883]
[    0.627481] pci 0000:03:00.0: reg 18 io port: [0xe800-0xe807]
[    0.627489] pci 0000:03:00.0: reg 1c io port: [0xe480-0xe483]
[    0.627497] pci 0000:03:00.0: reg 20 io port: [0xe400-0xe40f]
[    0.627561] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
[    0.627587] pci 0000:04:02.0: reg 10 32bit mmio: [0xfebffc00-0xfebffdff]
[    0.627650] pci 0000:00:1e.0: transparent bridge
[    0.627655] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.627673] bus 00 -> node 0
[    0.627678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.627885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.628034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.628133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.644826] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.644952] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.645072] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.645195] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.645318] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.645442] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.645565] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.645688] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.645800] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 47, should be 46 [20080926]
[    0.645829] ACPI: WMI: Mapper loaded
[    0.645864] SCSI subsystem initialized
[    0.645864] libata version 3.00 loaded.
[    0.645864] usbcore: registered new interface driver usbfs
[    0.645864] usbcore: registered new interface driver hub
[    0.645864] usbcore: registered new device driver usb
[    0.645864] PCI: Using ACPI for IRQ routing
[    0.652010] Bluetooth: Core ver 2.13
[    0.652024] NET: Registered protocol family 31
[    0.652024] Bluetooth: HCI device and connection manager initialized
[    0.652024] Bluetooth: HCI socket layer initialized
[    0.652024] NET: Registered protocol family 8
[    0.652024] NET: Registered protocol family 20
[    0.652033] NetLabel: Initializing
[    0.652035] NetLabel:  domain hash size = 128
[    0.652036] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.652049] NetLabel:  unlabeled traffic allowed by default
[    0.652065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.652070] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.660067] AppArmor: AppArmor Filesystem Enabled
[    0.664008] Switched to high resolution mode on CPU 0
[    0.664461] Switched to high resolution mode on CPU 1
[    0.664530] Switched to high resolution mode on CPU 2
[    0.664533] Switched to high resolution mode on CPU 3
[    0.668011] pnp: PnP ACPI init
[    0.668018] ACPI: bus type pnp registered
[    0.672790] pnp: PnP ACPI: found 17 devices
[    0.672792] ACPI: ACPI bus type pnp unregistered
[    0.672795] PnPBIOS: Disabled by ACPI PNP
[    0.672803] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.672806] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[    0.672812] system 00:08: ioport range 0xa00-0xa0f has been reserved
[    0.672814] system 00:08: ioport range 0xa10-0xa1f has been reserved
[    0.672816] system 00:08: ioport range 0xa20-0xa2f has been reserved
[    0.672818] system 00:08: ioport range 0xa30-0xa3f has been reserved
[    0.672823] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[    0.672825] system 00:09: ioport range 0x4c0-0x4cf has been reserved
[    0.672827] system 00:09: ioport range 0x4d2-0x4ff has been reserved
[    0.672829] system 00:09: ioport range 0x800-0x87f has been reserved
[    0.672831] system 00:09: ioport range 0x480-0x4bf has been reserved
[    0.672833] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.672836] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.672838] system 00:09: iomem range 0xfed40000-0xfed8ffff has been reserved
[    0.672843] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
[    0.672847] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.672850] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.672854] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[    0.672859] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[    0.672861] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[    0.672863] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[    0.672866] system 00:10: iomem range 0x100000-0xcfffffff could not be reserved
[    0.672868] system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved
[    0.707510] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.707513] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
[    0.707516] pci 0000:00:01.0:   MEM window: 0xfa000000-0xfe9fffff
[    0.707518] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.707522] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.707525] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
[    0.707529] pci 0000:00:1c.0:   MEM window: 0xfea00000-0xfeafffff
[    0.707532] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.707537] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[    0.707539] pci 0000:00:1c.4:   IO window: 0xe000-0xefff
[    0.707543] pci 0000:00:1c.4:   MEM window: disabled
[    0.707546] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.707551] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.707552] pci 0000:00:1e.0:   IO window: disabled
[    0.707556] pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.707559] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.707569] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.707572] pci 0000:00:01.0: setting latency timer to 64
[    0.707579] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.707582] pci 0000:00:1c.0: setting latency timer to 64
[    0.707587] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.707591] pci 0000:00:1c.4: setting latency timer to 64
[    0.707596] pci 0000:00:1e.0: setting latency timer to 64
[    0.707599] bus: 00 index 0 io port: [0x00-0xffff]
[    0.707601] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.707603] bus: 01 index 0 io port: [0xc000-0xcfff]
[    0.707604] bus: 01 index 1 mmio: [0xfa000000-0xfe9fffff]
[    0.707606] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[    0.707607] bus: 01 index 3 mmio: [0x0-0x0]
[    0.707609] bus: 02 index 0 io port: [0xd000-0xdfff]
[    0.707611] bus: 02 index 1 mmio: [0xfea00000-0xfeafffff]
[    0.707612] bus: 02 index 2 mmio: [0x0-0x0]
[    0.707614] bus: 02 index 3 mmio: [0x0-0x0]
[    0.707615] bus: 03 index 0 io port: [0xe000-0xefff]
[    0.707617] bus: 03 index 1 mmio: [0x0-0x0]
[    0.707618] bus: 03 index 2 mmio: [0x0-0x0]
[    0.707619] bus: 03 index 3 mmio: [0x0-0x0]
[    0.707621] bus: 04 index 0 mmio: [0x0-0x0]
[    0.707622] bus: 04 index 1 mmio: [0xfeb00000-0xfebfffff]
[    0.707624] bus: 04 index 2 mmio: [0x0-0x0]
[    0.707625] bus: 04 index 3 io port: [0x00-0xffff]
[    0.707627] bus: 04 index 4 mmio: [0x000000-0xffffffff]
[    0.707633] NET: Registered protocol family 2
[    0.720050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.720241] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.720483] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.720611] TCP: Hash tables configured (established 131072 bind 65536)
[    0.720613] TCP reno registered
[    0.724074] NET: Registered protocol family 1
[    0.724181] checking if image is initramfs... it is
[    1.256323] Freeing initrd memory: 7565k freed
[    1.256614] cpufreq: No nForce2 chipset.
[    1.256717] audit: initializing netlink socket (disabled)
[    1.256730] type=2000 audit(1249254146.256:1): initialized
[    1.263038] highmem bounce pool size: 64 pages
[    1.263042] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.264230] VFS: Disk quotas dquot_6.5.1
[    1.264276] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.264796] fuse init (API version 7.10)
[    1.264862] msgmni has been set to 1665
[    1.265058] alg: No test for stdrng (krng)
[    1.265068] io scheduler noop registered
[    1.265070] io scheduler anticipatory registered
[    1.265072] io scheduler deadline registered
[    1.265086] io scheduler cfq registered (default)
[    1.265222] pci 0000:01:00.0: Boot video device
[    1.271330] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.271355] pcieport-driver 0000:00:01.0: found MSI capability
[    1.271373] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[    1.271380] pci_express 0000:00:01.0:pcie00: allocate port service
[    1.271391] pci_express 0000:00:01.0:pcie03: allocate port service
[    1.271427] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.271454] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.271473] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[    1.271482] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.271492] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.271501] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.271545] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.271572] pcieport-driver 0000:00:1c.4: found MSI capability
[    1.271591] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
[    1.271601] pci_express 0000:00:1c.4:pcie00: allocate port service
[    1.271610] pci_express 0000:00:1c.4:pcie02: allocate port service
[    1.271622] pci_express 0000:00:1c.4:pcie03: allocate port service
[    1.271673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.272222] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.272333] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.272336] ACPI: Power Button (FF) [PWRF]
[    1.272382] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.272389] ACPI: Power Button (CM) [PWRB]
[    1.272645] processor ACPI_CPU:00: registered as cooling_device0
[    1.272672] processor ACPI_CPU:01: registered as cooling_device1
[    1.272701] processor ACPI_CPU:02: registered as cooling_device2
[    1.272728] processor ACPI_CPU:03: registered as cooling_device3
[    1.277747] thermal LNXTHERM:01: registered as thermal_zone0
[    1.277902] ACPI: Thermal Zone [THRM] (30 C)
[    1.277943] isapnp: Scanning for PnP cards...
[    1.630793] isapnp: No Plug & Play device found
[    1.637699] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.637781] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.638201] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.638773] brd: module loaded
[    1.639014] loop: module loaded
[    1.639063] Fixed MDIO Bus: probed
[    1.639067] PPP generic driver version 2.4.2
[    1.639111] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.639133] Driver 'sd' needs updating - please use bus_type methods
[    1.639140] Driver 'sr' needs updating - please use bus_type methods
[    1.639196] ata_piix 0000:00:1f.2: version 2.12
[    1.639207] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.639210] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.639241] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.639326] scsi0 : ata_piix
[    1.639439] scsi1 : ata_piix
[    1.640605] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    1.640609] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    2.548052] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.548062] ata1.01: SATA link down (SStatus 0 SControl 300)
[    2.556501] ata1.00: ATA-8: WDC WD6400AAVS-00G9B1, 05.04C05, max UDMA/133
[    2.556504] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.564518] ata1.00: configured for UDMA/133
[    3.360053] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.360063] ata2.01: SATA link down (SStatus 0 SControl 300)
[    3.368180] ata2.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
[    3.384197] ata2.00: configured for UDMA/100
[    3.385235] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAVS-0 05.0 PQ: 0 ANSI: 5
[    3.385319] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB)
[    3.385332] sd 0:0:0:0: [sda] Write Protect is off
[    3.385333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.385354] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.385401] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB)
[    3.385412] sd 0:0:0:0: [sda] Write Protect is off
[    3.385414] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.385434] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.385436]  sda: sda1 sda2 < sda5 sda6 > sda3
[    3.887048] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.887081] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.889251] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.06 PQ: 0 ANSI: 5
[    3.892128] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.892131] Uniform CD-ROM driver Revision: 3.20
[    3.892236] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.892278] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.892305] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.892309] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    3.892348] ata_piix 0000:00:1f.5: setting latency timer to 64
[    3.892407] scsi2 : ata_piix
[    3.892489] scsi3 : ata_piix
[    3.893494] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    3.893497] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    4.222553] ata3: SATA link down (SStatus 0 SControl 300)
[    4.550552] ata4: SATA link down (SStatus 0 SControl 300)
[    4.550869] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.550893] pata_jmicron 0000:03:00.0: setting latency timer to 64
[    4.550947] scsi4 : pata_jmicron
[    4.550991] scsi5 : pata_jmicron
[    4.551472] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[    4.551474] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[    4.860311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.860328] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.860353] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    4.860356] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.860411] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    4.864317] ehci_hcd 0000:00:1a.7: debug port 1
[    4.864321] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    4.864332] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    4.876007] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.876066] usb usb1: configuration #1 chosen from 1 choice
[    4.876092] hub 1-0:1.0: USB hub found
[    4.876098] hub 1-0:1.0: 6 ports detected
[    4.876188] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.876196] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.876198] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.876229] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.880123] ehci_hcd 0000:00:1d.7: debug port 1
[    4.880128] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.880137] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    4.896010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.896064] usb usb2: configuration #1 chosen from 1 choice
[    4.896088] hub 2-0:1.0: USB hub found
[    4.896094] hub 2-0:1.0: 6 ports detected
[    4.896174] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.896187] uhci_hcd: USB Universal Host Controller Interface driver
[    4.896220] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.896225] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.896227] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.896261] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.896280] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[    4.896334] usb usb3: configuration #1 chosen from 1 choice
[    4.896353] hub 3-0:1.0: USB hub found
[    4.896359] hub 3-0:1.0: 2 ports detected
[    4.896424] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.896429] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    4.896431] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.896463] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    4.896487] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    4.896545] usb usb4: configuration #1 chosen from 1 choice
[    4.896570] hub 4-0:1.0: USB hub found
[    4.896574] hub 4-0:1.0: 2 ports detected
[    4.896636] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    4.896640] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    4.896643] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    4.896674] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    4.896693] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[    4.896747] usb usb5: configuration #1 chosen from 1 choice
[    4.896765] hub 5-0:1.0: USB hub found
[    4.896771] hub 5-0:1.0: 2 ports detected
[    4.896841] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.896845] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.896848] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.896882] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    4.896901] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[    4.896953] usb usb6: configuration #1 chosen from 1 choice
[    4.896972] hub 6-0:1.0: USB hub found
[    4.896977] hub 6-0:1.0: 2 ports detected
[    4.897040] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.897045] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.897047] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.897080] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    4.897099] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    4.897151] usb usb7: configuration #1 chosen from 1 choice
[    4.897172] hub 7-0:1.0: USB hub found
[    4.897178] hub 7-0:1.0: 2 ports detected
[    4.897239] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.897243] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.897246] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.897277] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    4.897296] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[    4.897350] usb usb8: configuration #1 chosen from 1 choice
[    4.897369] hub 8-0:1.0: USB hub found
[    4.897373] hub 8-0:1.0: 2 ports detected
[    4.897472] usbcore: registered new interface driver libusual
[    4.897497] usbcore: registered new interface driver usbserial
[    4.897505] USB Serial support registered for generic
[    4.897518] usbcore: registered new interface driver usbserial_generic
[    4.897520] usbserial: USB Serial Driver core
[    4.897567] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    4.897850] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.897855] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.901534] mice: PS/2 mouse device common for all mice
[    4.913554] rtc_cmos 00:03: RTC can wake from S4
[    4.913583] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.913605] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.913663] device-mapper: uevent: version 1.0.3
[    4.913773] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    4.914116] device-mapper: multipath: version 1.0.5 loaded
[    4.914118] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.914234] EISA: Probing bus 0 at eisa.0
[    4.914258] EISA: Detected 0 cards.
[    4.914527] cpuidle: using governor ladder
[    4.914528] cpuidle: using governor menu
[    4.914926] TCP cubic registered
[    4.915008] NET: Registered protocol family 10
[    4.915346] lo: Disabled Privacy Extensions
[    4.915608] NET: Registered protocol family 17
[    4.915622] Bluetooth: L2CAP ver 2.11
[    4.915624] Bluetooth: L2CAP socket layer initialized
[    4.915626] Bluetooth: SCO (Voice Link) ver 0.6
[    4.915627] Bluetooth: SCO socket layer initialized
[    4.915699] Bluetooth: RFCOMM socket layer initialized
[    4.915704] Bluetooth: RFCOMM TTY layer initialized
[    4.915705] Bluetooth: RFCOMM ver 1.10
[    4.915791] Using IPI No-Shortcut mode
[    4.915848] registered taskstats version 1
[    4.915956]   Magic number: 5:563:48
[    4.916017] rtc_cmos 00:03: setting system clock to 2009-08-02 23:02:30 UTC (1249254150)
[    4.916019] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.916021] EDD information not available.
[    4.916187] Freeing unused kernel memory: 532k freed
[    4.916301] Write protecting the kernel text: 4128k
[    4.916348] Write protecting the kernel read-only data: 1532k
[    4.939713] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    5.085572] ATL1E 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.085584] ATL1E 0000:02:00.0: setting latency timer to 64
[    5.189552] usb 1-6: new high speed USB device using ehci_hcd and address 2
[    5.332799] usb 1-6: configuration #1 chosen from 1 choice
[    5.444018] usb 2-3: new high speed USB device using ehci_hcd and address 2
[    5.730518] ISO 9660 Extensions: Microsoft Joliet Level 3
[    6.030612] ISO 9660 Extensions: RRIP_1991A
[    6.135186] usb 2-3: configuration #1 chosen from 1 choice
[    6.138800] Initializing USB Mass Storage driver...
[    6.139184] scsi6 : SCSI emulation for USB Mass Storage devices
[    6.139257] usb-storage: device found at 2
[    6.139259] usb-storage: waiting for device to settle before scanning
[    6.139267] usbcore: registered new interface driver usb-storage
[    6.139270] USB Mass Storage support registered.
[    6.375036] aufs 20080922
[    6.690796] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[   11.136178] usb-storage: device scan complete
[   11.142507] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[   11.148752] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[   11.155012] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[   11.161235] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[   11.163052] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   11.163503] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   11.164597] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   11.164652] sd 6:0:0:1: Attached scsi generic sg3 type 0
[   11.165617] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   11.165659] sd 6:0:0:2: Attached scsi generic sg4 type 0
[   11.166931] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   11.166973] sd 6:0:0:3: Attached scsi generic sg5 type 0
[  148.176298] udev: starting version 141
[  148.344671] Linux agpgart interface v0.103
[  148.424303] iTCO_vendor_support: vendor-support=0
[  148.468745] input: PC Speaker as /devices/platform/pcspkr/input/input4
[  148.474329] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[  148.474452] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[  148.474461] iTCO_wdt: No card detected
[  148.679087] USB Serial support registered for GSM modem (1-port)
[  148.679127] option 1-6:1.0: GSM modem (1-port) converter detected
[  148.679201] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[  148.679214] option 1-6:1.1: GSM modem (1-port) converter detected
[  148.679252] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[  148.679265] option 1-6:1.2: GSM modem (1-port) converter detected
[  148.679325] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[  148.679338] usbcore: registered new interface driver option
[  148.679340] option: v0.7.2:USB Driver for GSM modems
[  149.072006] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[  149.240878] saa7146: register extension 'budget dvb'.
[  149.240915] budget dvb 0000:04:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[  149.241004] saa7146: found saa7146 @ mem f7f64c00 (revision 1, irq 19) (0x13c2,0x1018).
[  149.241006] saa7146 (0): dma buffer size 192512
[  149.241008] DVB: registering new adapter (TT-Budget-S-1401 PCI)
[  149.278491] adapter has MAC addr = 00:d0:5c:60:f5:5c
[  149.538454] psmouse serio1: ID: 10 00 64<6>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  149.903502] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  149.918182] DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)...
[  149.935436] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[  150.067232] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[  156.796477] Adding 4200956k swap on /dev/sda5.  Priority:-1 extents:1 across:4200956k
[  163.364023] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  163.364026] Bluetooth: BNEP filters: protocol multicast
[  163.412588] Bridge firewalling registered
[  171.476975] lp: driver loaded but no devices found
[  172.010055] ppdev: user-space parallel port driver
[  172.417132] ATL1E 0000:02:00.0: irq 2300 for MSI/MSI-X
[  172.417380] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  642.108066] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[  642.108085] ReiserFS: sda1: using ordered data mode
[  642.113007] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[  642.113230] ReiserFS: sda1: checking transaction log (sda1)
[  642.490750] ReiserFS: sda1: Using r5 hash to sort names
[  642.490779] ReiserFS: sda1: warning: Created .reiserfs_priv on sda1 - reserved for xattr storage.
[  814.060378] NTFS driver 2.1.29 [Flags: R/O MODULE].
[  814.109133] JFS: nTxBlock = 8192, nTxLock = 65536
[  814.179867] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[  814.182768] SGI XFS Quota Management subsystem

Сделал sudo fdisk -l, все разделы,что я разметил видны.

Пробовал также поставить Runtu 3,так там и при установке и при загрузке в live-cd появляется надпись:

Код: Выделить всё

BusyBox v 1.1.3 built-in shell (ash)
enter "help" for a list of built-in commands
(initramfs)_

и курсор мигает.Какую команду надо ввести ума не приложу!
На старом компе (2003г сборки) проблем с установкой вообще никаких не было,ставил и Runtu и Ubuntu,а тут...
Помогите,пожалуйста!

[Rootlexx]

sapog
Покажите всё же вывод:

Код: Выделить всё

sudo fdisk -l

Возможно, проблема в использовании «Acronis» для разметки диска.
Вот, почитайте: http://forum.ubuntu.ru/index.php?topic=62999.0 .

[sapog]

Диск /dev/sda: 640.1 ГБ, 640135028736 байт
255 heads, 63 sectors/track, 77825 cylinders
Units = цилиндры of 16065 * 512 = 8225280 bytes
Disk identifier: 0xce0cce0c

Устр-во Загр Начало Конец Блоки Id Система
/dev/sda1 1 1306 10490413+ 83 Linux
/dev/sda2 1307 77825 614638867+ f W95 расшир. (LBA)
/dev/sda3 * 1830 4440 20972857+ 7 HPFS/NTFS
/dev/sda5 1307 1829 4200966 82 Linux своп / Solaris
/dev/sda6 4441 77825 589464981 7 HPFS/NTFS

Прочитал вашу ссылку, Rootlexx, понял,что зря пользовался акронисом. Еще хочу спросить про gparted:запускается ли он с live-cd,если да,то какой командой и как вообще им пользоваться? Смогу ли я им нарезать разделы ntfs для винды?

[fed71]

Первым делом СЮДА http://ubuntologia.ru/installation
Читать и смотреть до полного просветления!!!

[blackdevil]

Еще хочу спросить про gparted:запускается ли он с live-cd,если да,то какой командой и как вообще им пользоваться? Смогу ли я им нарезать разделы ntfs для винды?

да, автоматом запускается графическая утилита, да.

[Rootlexx]

Устр-во Загр Начало Конец Блоки Id Система
/dev/sda1 1 1306 10490413+ 83 Linux
/dev/sda2 1307 77825 614638867+ f W95 расшир. (LBA)
/dev/sda3 * 1830 4440 20972857+ 7 HPFS/NTFS
/dev/sda5 1307 1829 4200966 82 Linux своп / Solaris
/dev/sda6 4441 77825 589464981 7 HPFS/NTFS

Интересно...
Сначала идёт первичный раздел /dev/sda1. Затем — расширенный /dev/sda2 до конца диска. Далее в пределах этого расширенного раздела расположен /dev/sda5 (логический), а сразу за ним... первичный /dev/sda3, активный . А потом снова логический /dev/sda6, притом, что больше одного расширенного раздела на одном физическом диске быть не может.

Выводы: Acronis рулит, «Impossible is nothing» ©.

[GhostOfFire]

Добрый день!
Я новичок в Линуксе и столкнулся с некоторыми трудностями, не могли бы Вы мне помочь? У меня стоит Ubuntu 9.04.

Пытался поставить Ubuntu на ноут, но дальше строчки "Установить Ubuntu в текстовом режме" дело так не пошло. Мне кажется, что дело в процессоре. Процессор Интел, вдухядерный, вот его данные: Socket P Intel Dual-Core Mobile T2370 (1.73 GHz 1MB 533 MHz TDP35W SLA4J. Ноут фирмы Irbis.
Как устранить эту проблему?

[RasenHerz]

у вас не грузится ядро когда вы пытаетесь начать установку? если так, то попробуйте загрузится с параметрами acpi=off noapic - с Debian меня это частенько выручало

[GhostOfFire]

Можем на "ты" :)
Да, загружаюсь с диска, выбираю "установить ubuntu в текстовом режиме". Потом, экран меняется в левом верхнем углу мигает белая полоска, и дальше дело на идёт. Извиняюсь за ламерскую обрисовку ситуации, просто не знаю, как иначе выразиться. На компе обычный, одноядерный Интоловский процессор. На комп убунту встала без проблем, а на ноут не хочет.
Спасибо за совет, вечером попробую...

[GhostOfFire]

Применил я эти параметры (acpi=off, noapic), Линукс установился. Но тут же появилась новая проблема: Загружаю Линукс, пошла загрузка (полоска пробежала) и весь процесс встал на мёртвой точке, не грузится. Про ошибки вроде ничего не пишет, пишет по очереди запускаемые…эээ…службы. Процесс останавливается, при загрузке графической оболочки. Что с этим можно сделать?
Мне кажется, что всё из-за процессора, как считаете?

[RasenHerz]

Применил я эти параметры (acpi=off, noapic), Линукс установился. Но тут же появилась новая проблема: Загружаю Линукс, пошла загрузка (полоска пробежала) и весь процесс встал на мёртвой точке, не грузится. Про ошибки вроде ничего не пишет, пишет по очереди запускаемые…эээ…службы. Процесс останавливается, при загрузке графической оболочки. Что с этим можно сделать?
Мне кажется, что всё из-за процессора, как считаете?

Попробуйте загрузится без сплэш скрина и думаю самое время убрать эти опции(acpi =off noapic) из строки загрузки (если они там есть).

[GhostOfFire]

А что это за параметры (acpi =off noapic)?

[RasenHerz]

noapic - отключение программируемого контроллера прерываний (бывает что при установке его невозможно правильно сконфигурировать и происходит kernel panic)
acpi=off - отключение управления питанием (во время установки на ноутбук предпочитаю его отключать, т.к. проку от него пока нет, а вот создать проблемы он может)

P.S. я уже не раз в теме про Debian советовал использовать эти настройки (особенно с Etch) при установке, с Lenny, слава богу, вроде все нормально.

[GhostOfFire]

Ясно. А как их отключить? Если заходить под обычной учёткой, к командной строке доступа нет, но если заходить через recovery mode, то есть доступ к рутовому шелу.

[RasenHerz]

Ясно. А как их отключить? Если заходить под обычной учёткой, к командной строке доступа нет, но если заходить через recovery mode, то есть доступ к рутовому шелу.

в GRUB выбираете пункт меню для загрузки, жмете E и вводите пароль на загрузчик(если он есть) - появятся параметры загрузки ядра, находите строчку начинающуюся с kernel и дописываете в ее конец acpi=off noapic жмете B и загружаетесь.

[GhostOfFire]

В конце строки начинающйся с kernel следующее: ro acpi=off noapic quiest splash.
Я их по всякому изменял, добавлял, удалял, толку нет, загрузка не шла. В лучшем случае, появлялось приглашение на ввод логина. Но тут же, секунд на 10-15 гаснет экран, потом на секунду появляется приглашение на ввод логина, и экран снова гаснет, так до бесконечности.

[neudachnik]

...Извиняюсь за ламерскую обрисовку ситуации, просто не знаю, как иначе выразиться...
...Спасибо за совет, вечером попробую...

Первым делом СЮДА http://ubuntologia.ru/installation
Читать и смотреть до полного просветления!!!

Ура ! В попытке познать Linux я не одинок !

[blackdevil]

acpi=off - отключение управления питанием (во время установки на ноутбук предпочитаю его отключать, т.к. проку от него пока нет, а вот создать проблемы он может)

как это нет прока от acpi на ноутбуке? у меня он без acpi вообще отказывается выключаться нормально, не говоря уже про энергосбережение и т п.....

[RasenHerz]

acpi=off - отключение управления питанием (во время установки на ноутбук предпочитаю его отключать, т.к. проку от него пока нет, а вот создать проблемы он может)

как это нет прока от acpi на ноутбуке? у меня он без acpi вообще отказывается выключаться нормально, не говоря уже про энергосбережение и т п.....

P.S. я уже не раз в теме про Debian советовал использовать эти настройки (особенно с Etch) при установке, с Lenny, слава богу, вроде все нормально.

Я посоветовал его отключить только на время установки.