ОС Ubuntu 9.04
ноутбук dell 500 vostro
Решил настроить себе это дело. Поискал в интернет, что пишут про настройку тачпада.
Нашел этот ресурс http://tuxmobil.org/touchpad_driver.html
Сделал как написано:
Код: Выделить всё
To verify that you have a Synaptics touchpad you may do cat /proc/bus/input/devices:
...
I: Bus=0011 Vendor=0002 Product=0007 Version=0000
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse1 event2
B: EV=b
B: KEY=6420 0 670000 0 0 0 0 0 0 0 0
B: ABS=11000003но у меня такой надписи не нашлось, вот что написал у меня
Код: Выделить всё
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
U: Uniq=
H: Handlers=event0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=4000 0 0 0 0
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input3
U: Uniq=
H: Handlers=mouse0 event3
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=120013
B: KEY=500f 2102002 380307c f810d001 feffffdf ffefffff ffffffff ffffffff
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input9
U: Uniq=
H: Handlers=kbd event9
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0002 Product=0008 Version=0000
N: Name="PS/2 Mouse"
P: Phys=isa0060/serio2/input1
S: Sysfs=/devices/platform/i8042/serio2/input/input10
U: Uniq=
H: Handlers=mouse2 event10
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0002 Product=0008 Version=7321
N: Name="AlpsPS/2 ALPS GlidePoint"
P: Phys=isa0060/serio2/input0
S: Sysfs=/devices/platform/i8042/serio2/input/input11
U: Uniq=
H: Handlers=mouse3 event11
B: EV=f
B: KEY=420 0 70000 0 0 0 0 0 0 0 0
B: REL=3
B: ABS=1000003
I: Bus=0003 Vendor=0a5c Product=4502 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1d.2-2.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input12
U: Uniq=
H: Handlers=kbd event7
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=0a5c Product=4503 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1d.2-2.3/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input13
U: Uniq=
H: Handlers=mouse1 event8
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
B: MSC=10на dmesg выдал
Код: Выделить всё
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-14-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 00:28:35 UTC 2009 (Ubuntu 2.6.28-14.47-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f66d800 (usable)
[ 0.000000] BIOS-e820: 000000003f66d800 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x3f66d max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f66d800 (usable)
[ 0.000000] modified: 000000003f66d800 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378be000 - 37fefa35
[ 0.000000] Allocated new RAMDISK: 0087b000 - 00faca35
[ 0.000000] Move RAMDISK from 00000000378be000 - 0000000037fefa34 to 0087b000 - 00faca34
[ 0.000000] ACPI: RSDP 000FC0E0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 3F66F200, 006C (r1 DELL M08 27D8061B ASL 61)
[ 0.000000] ACPI: FACP 3F66F09C, 00F4 (r4 DELL M08 27D8061B ASL 61)
[ 0.000000] ACPI: DSDT 3F66F800, 5477 (r2 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS 3F67E000, 0040
[ 0.000000] ACPI: HPET 3F66F300, 0038 (r1 DELL M08 1 ASL 61)
[ 0.000000] ACPI: APIC 3F66F400, 0068 (r1 DELL M08 27D8061B ASL 47)
[ 0.000000] ACPI: MCFG 3F66F3C0, 003E (r16 DELL M08 27D8061B ASL 61)
[ 0.000000] ACPI: SLIC 3F66F49C, 0024 (r1 DELL M08 27D8061B ASL 61)
[ 0.000000] ACPI: OSFR 3F66EA00, 002C (r1 DELL M08 27D8061B ASL 61)
[ 0.000000] ACPI: BOOT 3F66EFC0, 0028 (r1 DELL M08 27D8061B ASL 61)
[ 0.000000] ACPI: SSDT 3F66E25B, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F66DD8F, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 130MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac]
[ 0.000000] #4 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087b000 - 0000faca35] NEW RAMDISK ==> [000087b000 - 0000faca35]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f66d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0003f66d
[ 0.000000] On node 0 totalpages: 259570
[ 0.000000] free_area_init_node: node 0, pgdat c06ca500, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 261 pages used for memmap
[ 0.000000] HighMem zone: 33130 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257541
[ 0.000000] Kernel command line: root=UUID=c2bcb30d-9f67-43c6-bec6-271c91bd70a2 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1861.650 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5193860 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1008740k/1038772k available (4115k kernel code, 29168k reserved, 2196k data, 532k init, 133564k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB)
[ 0.004000] .data : 0xc0504def - 0xc0729e60 (2196 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0504def (4115 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.30 BogoMIPS (lpj=7446600)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.016755] SMP alternatives: switching to UP code
[ 0.107428] ACPI: Core revision 20080926
[ 0.110213] ACPI: Checking initramfs for custom DSDT
[ 0.428506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.469753] CPU0: Intel(R) Celeron(R) CPU 540 @ 1.86GHz stepping 01
[ 0.472001] Brought up 1 CPUs
[ 0.472001] Total of 1 processors activated (3723.30 BogoMIPS).
[ 0.472001] CPU0 attaching NULL sched-domain.
[ 0.472001] net_namespace: 776 bytes
[ 0.472001] Booting paravirtualized kernel on bare hardware
[ 0.472001] Time: 9:23:53 Date: 08/25/09
[ 0.472001] regulator: core version 0.5
[ 0.472001] NET: Registered protocol family 16
[ 0.472001] EISA bus registered
[ 0.472001] ACPI: bus type pci registered
[ 0.472001] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.472001] PCI: MCFG area at f8000000 reserved in E820
[ 0.472001] PCI: Using MMCONFIG for extended config space
[ 0.472001] PCI: Using configuration type 1 for base access
[ 0.472001] ACPI: EC: Look up EC in DSDT
[ 0.495741] ACPI: Interpreter enabled
[ 0.495746] ACPI: (supports S0 S3 S4 S5)
[ 0.495763] ACPI: Using IOAPIC for interrupt routing
[ 0.543181] ACPI: No dock devices found.
[ 0.543190] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.543286] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
[ 0.543295] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[ 0.543300] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
[ 0.543338] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
[ 0.543459] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
[ 0.543529] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
[ 0.543605] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.543658] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.543664] pci 0000:00:1a.7: PME# disabled
[ 0.543727] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[ 0.543772] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.543777] pci 0000:00:1b.0: PME# disabled
[ 0.543852] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.543857] pci 0000:00:1c.0: PME# disabled
[ 0.543934] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.543940] pci 0000:00:1c.1: PME# disabled
[ 0.544024] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.544029] pci 0000:00:1c.4: PME# disabled
[ 0.544101] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
[ 0.544170] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
[ 0.544239] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.544316] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.544368] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.544374] pci 0000:00:1d.7: PME# disabled
[ 0.544550] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.544554] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.544595] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.544603] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.544612] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.544620] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.544629] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
[ 0.544689] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
[ 0.544697] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
[ 0.544706] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
[ 0.544714] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
[ 0.544723] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eef]
[ 0.544731] pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff]
[ 0.544752] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.544757] pci 0000:00:1f.2: PME# disabled
[ 0.544787] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fbf00-0xfe9fbfff]
[ 0.544815] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
[ 0.544927] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
[ 0.544939] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff]
[ 0.544997] pci 0000:09:00.0: supports D1 D2
[ 0.544998] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.545005] pci 0000:09:00.0: PME# disabled
[ 0.545089] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.545094] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.545291] pci 0000:0b:00.0: reg 10 32bit mmio: [0xfe7ff000-0xfe7fffff]
[ 0.545460] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[ 0.545473] pci 0000:0b:00.0: PME# disabled
[ 0.545589] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.545663] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.545668] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff]
[ 0.545677] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.545744] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff]
[ 0.545799] pci 0000:02:09.0: supports D1 D2
[ 0.545800] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.545806] pci 0000:02:09.0: PME# disabled
[ 0.545853] pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff400-0xfe3ff4ff]
[ 0.545907] pci 0000:02:09.1: supports D1 D2
[ 0.545909] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.545914] pci 0000:02:09.1: PME# disabled
[ 0.545961] pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff]
[ 0.546017] pci 0000:02:09.2: supports D1 D2
[ 0.546018] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.546023] pci 0000:02:09.2: PME# disabled
[ 0.546071] pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff]
[ 0.546125] pci 0000:02:09.3: supports D1 D2
[ 0.546127] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.546133] pci 0000:02:09.3: PME# disabled
[ 0.546180] pci 0000:02:09.4: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff]
[ 0.546233] pci 0000:02:09.4: supports D1 D2
[ 0.546235] pci 0000:02:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.546240] pci 0000:02:09.4: PME# disabled
[ 0.546299] pci 0000:00:1e.0: transparent bridge
[ 0.546308] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
[ 0.546345] bus 00 -> node 0
[ 0.546352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.546854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.547027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.547169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.547311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.559251] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.559395] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.559536] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[ 0.559661] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[ 0.559806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.559948] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.560096] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.560223] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.560552] ACPI: WMI: Mapper loaded
[ 0.560724] SCSI subsystem initialized
[ 0.560759] libata version 3.00 loaded.
[ 0.560799] usbcore: registered new interface driver usbfs
[ 0.560815] usbcore: registered new interface driver hub
[ 0.560839] usbcore: registered new device driver usb
[ 0.560949] PCI: Using ACPI for IRQ routing
[ 0.561137] Bluetooth: Core ver 2.13
[ 0.561137] NET: Registered protocol family 31
[ 0.561137] Bluetooth: HCI device and connection manager initialized
[ 0.561137] Bluetooth: HCI socket layer initialized
[ 0.561137] NET: Registered protocol family 8
[ 0.561137] NET: Registered protocol family 20
[ 0.561137] NetLabel: Initializing
[ 0.561137] NetLabel: domain hash size = 128
[ 0.561137] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.561137] NetLabel: unlabeled traffic allowed by default
[ 0.561137] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.561137] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.564067] AppArmor: AppArmor Filesystem Enabled
[ 0.564074] pnp: PnP ACPI init
[ 0.564074] ACPI: bus type pnp registered
[ 0.568017] Switched to high resolution mode on CPU 0
[ 0.586441] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.586445] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.586530] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.586533] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.586536] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.586539] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.611437] pnp: PnP ACPI: found 13 devices
[ 0.611439] ACPI: ACPI bus type pnp unregistered
[ 0.611443] PnPBIOS: Disabled by ACPI PNP
[ 0.611452] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved
[ 0.611455] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved
[ 0.611462] system 00:06: ioport range 0xc80-0xcff could not be reserved
[ 0.611469] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.611474] system 00:0a: ioport range 0x900-0x97f has been reserved
[ 0.611476] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.611482] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[ 0.611485] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[ 0.611487] system 00:0b: ioport range 0x10c0-0x10df has been reserved
[ 0.611489] system 00:0b: ioport range 0x809-0x809 has been reserved
[ 0.611495] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[ 0.611498] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.611500] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.611503] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.611506] system 00:0c: iomem range 0x100000-0x3f66d7ff could not be reserved
[ 0.611508] system 00:0c: iomem range 0x3f66d800-0x3f6fffff has been reserved
[ 0.611511] system 00:0c: iomem range 0x3f700000-0x3f7fffff has been reserved
[ 0.611514] system 00:0c: iomem range 0x3f700000-0x3fefffff could not be reserved
[ 0.611516] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved
[ 0.611519] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.611522] system 00:0c: iomem range 0xfec00000-0xfec0ffff has been reserved
[ 0.611524] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.611527] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.611529] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.611532] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.611535] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.611537] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.611540] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.611543] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.646249] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09
[ 0.646253] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.646260] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.646265] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.646274] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b
[ 0.646276] pci 0000:00:1c.1: IO window: disabled
[ 0.646282] pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff
[ 0.646287] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.646296] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c
[ 0.646299] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.646306] pci 0000:00:1c.4: MEM window: 0xfe400000-0xfe6fffff
[ 0.646311] pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.646320] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.646322] pci 0000:00:1e.0: IO window: disabled
[ 0.646329] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff
[ 0.646334] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.646354] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.646360] pci 0000:00:1c.0: setting latency timer to 64
[ 0.646370] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.646376] pci 0000:00:1c.1: setting latency timer to 64
[ 0.646385] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.646391] pci 0000:00:1c.4: setting latency timer to 64
[ 0.646400] pci 0000:00:1e.0: setting latency timer to 64
[ 0.646404] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.646406] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.646409] bus: 09 index 0 io port: [0xd000-0xdfff]
[ 0.646411] bus: 09 index 1 mmio: [0xfe800000-0xfe8fffff]
[ 0.646412] bus: 09 index 2 mmio: [0x0-0x0]
[ 0.646414] bus: 09 index 3 mmio: [0x0-0x0]
[ 0.646416] bus: 0b index 0 mmio: [0x0-0x0]
[ 0.646418] bus: 0b index 1 mmio: [0xfe700000-0xfe7fffff]
[ 0.646420] bus: 0b index 2 mmio: [0x0-0x0]
[ 0.646421] bus: 0b index 3 mmio: [0x0-0x0]
[ 0.646423] bus: 0c index 0 io port: [0xc000-0xcfff]
[ 0.646425] bus: 0c index 1 mmio: [0xfe400000-0xfe6fffff]
[ 0.646427] bus: 0c index 2 mmio: [0xf0000000-0xf01fffff]
[ 0.646429] bus: 0c index 3 mmio: [0x0-0x0]
[ 0.646431] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.646433] bus: 02 index 1 mmio: [0xfe300000-0xfe3fffff]
[ 0.646434] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.646436] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.646438] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[ 0.646446] NET: Registered protocol family 2
[ 0.646552] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.646789] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.647329] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.647703] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.647706] TCP reno registered
[ 0.647856] NET: Registered protocol family 1
[ 0.647995] checking if image is initramfs... it is
[ 1.290304] Freeing initrd memory: 7366k freed
[ 1.290350] Simple Boot Flag at 0x79 set to 0x1
[ 1.290436] cpufreq: No nForce2 chipset.
[ 1.290581] audit: initializing netlink socket (disabled)
[ 1.290605] type=2000 audit(1251192233.288:1): initialized
[ 1.297988] highmem bounce pool size: 64 pages
[ 1.297994] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.299131] VFS: Disk quotas dquot_6.5.1
[ 1.299185] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.299735] fuse init (API version 7.10)
[ 1.299808] msgmni has been set to 1724
[ 1.299964] alg: No test for stdrng (krng)
[ 1.299975] io scheduler noop registered
[ 1.299977] io scheduler anticipatory registered
[ 1.299979] io scheduler deadline registered
[ 1.299994] io scheduler cfq registered (default)
[ 1.300015] pci 0000:00:02.0: Boot video device
[ 1.302098] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.302155] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.302196] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.302213] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.302228] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.302239] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.302318] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.302373] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.302409] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 1.302427] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.302438] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.302449] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.302528] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.302582] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.302619] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
[ 1.302636] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.302648] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.302658] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.302745] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.302821] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.302943] ACPI: AC Adapter [AC] (on-line)
[ 1.332756] ACPI: Battery Slot [BAT0] (battery present)
[ 1.332819] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.333514] ACPI: Lid Switch [LID]
[ 1.333555] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.333561] ACPI: Power Button (CM) [PBTN]
[ 1.333597] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.333599] ACPI: Sleep Button (CM) [SBTN]
[ 1.334235] Monitor-Mwait will be used to enter C-1 state
[ 1.334238] Monitor-Mwait will be used to enter C-2 state
[ 1.334240] Monitor-Mwait will be used to enter C-3 state
[ 1.334253] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.334279] processor ACPI_CPU:00: registered as cooling_device0
[ 1.334282] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.336027] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.336236] ACPI: Thermal Zone [THM] (62 C)
[ 1.336278] isapnp: Scanning for PnP cards...
[ 1.690343] isapnp: No Plug & Play device found
[ 1.691514] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.692507] brd: module loaded
[ 1.692777] loop: module loaded
[ 1.692839] Fixed MDIO Bus: probed
[ 1.692845] PPP generic driver version 2.4.2
[ 1.692901] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.692926] Driver 'sd' needs updating - please use bus_type methods
[ 1.692935] Driver 'sr' needs updating - please use bus_type methods
[ 1.692998] ata_piix 0000:00:1f.1: version 2.12
[ 1.693010] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.693048] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.693155] scsi0 : ata_piix
[ 1.693237] scsi1 : ata_piix
[ 1.693951] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 1.693954] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 1.872522] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33
[ 1.904471] ata1.00: configured for UDMA/33
[ 1.909957] ata2: port disabled. ignoring.
[ 1.913773] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D400 PQ: 0 ANSI: 5
[ 1.929838] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.929842] Uniform CD-ROM driver Revision: 3.20
[ 1.929933] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.929972] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.929991] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.929996] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.084036] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.084098] scsi2 : ata_piix
[ 2.084147] scsi3 : ata_piix
[ 2.084856] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
[ 2.084864] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
[ 2.880105] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.880123] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 2.888571] ata3.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC39P, max UDMA/133
[ 2.888573] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 2.904595] ata3.00: configured for UDMA/133
[ 3.544062] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 3.544075] ata4.01: SATA link down (SStatus 0 SControl 0)
[ 3.544155] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
[ 3.544238] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.544253] sd 2:0:0:0: [sda] Write Protect is off
[ 3.544255] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.544278] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.544331] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.544344] sd 2:0:0:0: [sda] Write Protect is off
[ 3.544346] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.544368] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.544371] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 3.598863] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.598901] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.599409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.599438] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.599460] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.599464] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.599520] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.603448] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.603456] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.603470] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 3.616009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.616066] usb usb1: configuration #1 chosen from 1 choice
[ 3.616091] hub 1-0:1.0: USB hub found
[ 3.616099] hub 1-0:1.0: 4 ports detected
[ 3.616194] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.616206] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.616210] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.616249] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.620172] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.620180] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.620194] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 3.636010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.636074] usb usb2: configuration #1 chosen from 1 choice
[ 3.636095] hub 2-0:1.0: USB hub found
[ 3.636102] hub 2-0:1.0: 6 ports detected
[ 3.636189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.636203] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.636235] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.636242] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.636246] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.636290] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.636319] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 3.636388] usb usb3: configuration #1 chosen from 1 choice
[ 3.636412] hub 3-0:1.0: USB hub found
[ 3.636418] hub 3-0:1.0: 2 ports detected
[ 3.636496] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.636503] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.636507] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.636542] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.636578] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 3.636646] usb usb4: configuration #1 chosen from 1 choice
[ 3.636672] hub 4-0:1.0: USB hub found
[ 3.636678] hub 4-0:1.0: 2 ports detected
[ 3.636752] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.636759] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.636762] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.636813] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.636841] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 3.636910] usb usb5: configuration #1 chosen from 1 choice
[ 3.636933] hub 5-0:1.0: USB hub found
[ 3.636939] hub 5-0:1.0: 2 ports detected
[ 3.637009] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.637016] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.637019] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.637057] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.637085] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 3.637152] usb usb6: configuration #1 chosen from 1 choice
[ 3.637173] hub 6-0:1.0: USB hub found
[ 3.637180] hub 6-0:1.0: 2 ports detected
[ 3.637254] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.637260] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.637264] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.637299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.637326] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 3.637390] usb usb7: configuration #1 chosen from 1 choice
[ 3.637417] hub 7-0:1.0: USB hub found
[ 3.637422] hub 7-0:1.0: 2 ports detected
[ 3.637547] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.651091] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.660716] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.660721] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.660724] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.660726] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.660728] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.660867] mice: PS/2 mouse device common for all mice
[ 3.661010] rtc_cmos 00:04: RTC can wake from S4
[ 3.661042] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.661076] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.661146] device-mapper: uevent: version 1.0.3
[ 3.661351] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.661395] device-mapper: multipath: version 1.0.5 loaded
[ 3.661398] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.661464] EISA: Probing bus 0 at eisa.0
[ 3.661472] Cannot allocate resource for EISA slot 1
[ 3.661502] EISA: Detected 0 cards.
[ 3.661561] cpuidle: using governor ladder
[ 3.661614] cpuidle: using governor menu
[ 3.662027] TCP cubic registered
[ 3.662117] NET: Registered protocol family 10
[ 3.662443] lo: Disabled Privacy Extensions
[ 3.662686] NET: Registered protocol family 17
[ 3.662703] Bluetooth: L2CAP ver 2.11
[ 3.662704] Bluetooth: L2CAP socket layer initialized
[ 3.662707] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.662708] Bluetooth: SCO socket layer initialized
[ 3.662732] Bluetooth: RFCOMM socket layer initialized
[ 3.662739] Bluetooth: RFCOMM TTY layer initialized
[ 3.662741] Bluetooth: RFCOMM ver 1.10
[ 3.662779] Using IPI No-Shortcut mode
[ 3.662849] registered taskstats version 1
[ 3.662963] Magic number: 5:666:374
[ 3.663049] rtc_cmos 00:04: setting system clock to 2009-08-25 09:23:56 UTC (1251192236)
[ 3.663052] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.663053] EDD information not available.
[ 3.663334] Freeing unused kernel memory: 532k freed
[ 3.663418] Write protecting the kernel text: 4116k
[ 3.663447] Write protecting the kernel read-only data: 1524k
[ 3.700682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.363559] sky2 driver version 1.22
[ 4.363606] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.363619] sky2 0000:09:00.0: setting latency timer to 64
[ 4.363682] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 4.363825] sky2 0000:09:00.0: irq 2300 for MSI/MSI-X
[ 4.364422] sky2 eth0: addr 00:1d:09:5e:ee:04
[ 4.364524] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 4.403417] ohci1394 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.456160] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.601636] usb 7-2: configuration #1 chosen from 1 choice
[ 4.604597] hub 7-2:1.0: USB hub found
[ 4.606565] hub 7-2:1.0: 3 ports detected
[ 4.750838] Marking TSC unstable due to TSC halts in idle
[ 4.885600] usb 7-2.1: new full speed USB device using uhci_hcd and address 3
[ 5.005796] kjournald starting. Commit interval 5 seconds
[ 5.005808] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.015295] usb 7-2.1: configuration #1 chosen from 1 choice
[ 5.089601] usb 7-2.2: new full speed USB device using uhci_hcd and address 4
[ 5.219680] usb 7-2.2: configuration #1 chosen from 1 choice
[ 5.297598] usb 7-2.3: new full speed USB device using uhci_hcd and address 5
[ 5.429673] usb 7-2.3: configuration #1 chosen from 1 choice
[ 5.736149] ieee1394: Host added: ID:BUS[0-00:1023] GUID[374fc000305d6470]
[ 11.086683] udev: starting version 141
[ 11.214256] Linux agpgart interface v0.103
[ 11.247361] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 11.247655] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 11.251018] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 11.263721] acpi device:31: registered as cooling_device1
[ 11.264259] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/input/input5
[ 11.292156] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 11.292244] ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926]
[ 11.292359] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input6
[ 11.316151] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 11.468109] cfg80211: Calling CRDA to update world regulatory domain
[ 11.475477] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 11.475589] usbcore: registered new interface driver btusb
[ 11.793140] cfg80211: World regulatory domain updated:
[ 11.793144] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.793147] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.793149] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.793151] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.793153] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.793155] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.821315] usbcore: registered new interface driver hiddev
[ 11.824922] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input7
[ 11.826156] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
[ 11.830034] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input8
[ 11.840533] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
[ 11.840555] usbcore: registered new interface driver usbhid
[ 11.840579] usbhid: v2.6:USB HID core driver
[ 11.846548] iTCO_vendor_support: vendor-support=0
[ 11.848233] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.848446] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 11.848541] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.877872] sdhci: Secure Digital Host Controller Interface driver
[ 11.877876] sdhci: Copyright(c) Pierre Ossman
[ 11.879475] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 11.879500] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 11.882601] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
[ 11.916784] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 12.231548] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 12.231551] ricoh-mmc: Copyright(c) Philip Langdale
[ 12.231582] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12)
[ 12.231597] ricoh-mmc: Controller is now disabled.
[ 12.246956] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 12.344377] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 12.344381] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 12.344495] iwl3945 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.344509] iwl3945 0000:0b:00.0: setting latency timer to 64
[ 12.344609] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 12.346327] iwl3945 0000:0b:00.0: irq 2299 for MSI/MSI-X
[ 12.405588] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 12.423662] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 12.538529] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 12.562905] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 12.563009] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.000021] Clocksource tsc unstable (delta = -332286646 ns)
[ 13.100166] lp: driver loaded but no devices found
[ 13.244293] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10
[ 13.289909] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11
[ 72.470337] EXT3 FS on sda1, internal journal
[ 73.309283] type=1505 audit(1251181506.144:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2621
[ 73.358027] type=1505 audit(1251181506.192:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2625
[ 73.358173] type=1505 audit(1251181506.192:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2625
[ 73.358217] type=1505 audit(1251181506.192:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2625
[ 73.358257] type=1505 audit(1251181506.192:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2625
[ 73.495712] type=1505 audit(1251181506.328:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2630
[ 73.495940] type=1505 audit(1251181506.328:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2630
[ 73.525285] type=1505 audit(1251181506.360:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2634
[ 79.343771] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 79.343774] Bluetooth: BNEP filters: protocol multicast
[ 79.372458] Bridge firewalling registered
[ 80.760775] ppdev: user-space parallel port driver
[ 81.615900] [drm] Initialized drm 1.1.0 20060810
[ 81.621864] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 81.621870] pci 0000:00:02.0: setting latency timer to 64
[ 81.622005] pci 0000:00:02.0: irq 2298 for MSI/MSI-X
[ 81.622094] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 81.773475] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 84.166951] sky2 eth0: enabling interface
[ 84.167163] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 84.167884] iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-1.ucode
[ 84.324339] Registered led device: iwl-phy0:radio
[ 84.324356] Registered led device: iwl-phy0:assoc
[ 84.324407] Registered led device: iwl-phy0:RX
[ 84.324420] Registered led device: iwl-phy0:TX
[ 84.337060] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1241.624281] CPU0 attaching NULL sched-domain.
[ 1241.644084] CPU0 attaching NULL sched-domain.
[ 1511.774006] wlan0: authenticate with AP 00:22:b0:f3:02:59
[ 1511.775787] wlan0: authenticated
[ 1511.775790] wlan0: associate with AP 00:22:b0:f3:02:59
[ 1511.778876] wlan0: RX AssocResp from 00:22:b0:f3:02:59 (capab=0x431 status=0 aid=1)
[ 1511.778879] wlan0: associated
[ 1511.786311] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1521.900050] wlan0: no IPv6 routers present
[23469.837740] wlan0: disassociating by local choice (reason=3)
[23472.528084] wlan0: deauthenticated
[23503.563074] wlan0: direct probe to AP 00:22:b0:f3:02:59 try 1
[23503.566518] wlan0 direct probe responded
[23503.566522] wlan0: authenticate with AP 00:22:b0:f3:02:59
[23503.568320] wlan0: authenticated
[23503.568323] wlan0: associate with AP 00:22:b0:f3:02:59
[23503.571397] wlan0: RX AssocResp from 00:22:b0:f3:02:59 (capab=0x431 status=0 aid=1)
[23503.571400] wlan0: associated
[23550.399264] wlan0: disassociating by local choice (reason=3)
[23552.806700] wlan0: deauthenticated
[23636.671618] wlan0: authenticate with AP 00:22:b0:f3:02:59
[23636.673452] wlan0: authenticated
[23636.673456] wlan0: associate with AP 00:22:b0:f3:02:59
[23636.679663] wlan0: RX AssocResp from 00:22:b0:f3:02:59 (capab=0x431 status=0 aid=1)
[23636.679665] wlan0: associated
[23686.433661] wlan0: deauthenticated
[23689.235937] iwl3945: Radio Frequency Kill Switch is On:
[23689.235940] Kill switch must be turned off for wireless networking to work.
[23689.376084] usb 7-2: USB disconnect, address 2
[23689.376088] usb 7-2.1: USB disconnect, address 3
[23689.376591] btusb_intr_complete: hci0 urb d72f3f80 failed to resubmit (19)
[23689.376597] btusb_bulk_complete: hci0 urb d72f3a00 failed to resubmit (19)
[23689.377590] btusb_bulk_complete: hci0 urb d72f3e80 failed to resubmit (19)
[23689.377994] btusb_send_frame: hci0 urb cfe48e80 submission failed
[23689.636678] usb 7-2.2: USB disconnect, address 4
[23689.676708] usb 7-2.3: USB disconnect, address 5
[23693.577969] Registered led device: iwl-phy0:radio
[23693.577985] Registered led device: iwl-phy0:assoc
[23693.578036] Registered led device: iwl-phy0:RX
[23693.578050] Registered led device: iwl-phy0:TX
[23694.044047] usb 7-2: new full speed USB device using uhci_hcd and address 6
[23694.264256] usb 7-2: configuration #1 chosen from 1 choice
[23694.267129] hub 7-2:1.0: USB hub found
[23694.269095] hub 7-2:1.0: 3 ports detected
[23694.573109] usb 7-2.1: new full speed USB device using uhci_hcd and address 7
[23694.722347] usb 7-2.1: configuration #1 chosen from 1 choice
[23694.825783] usb 7-2.2: new full speed USB device using uhci_hcd and address 8
[23695.004197] usb 7-2.2: configuration #1 chosen from 1 choice
[23695.049413] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input12
[23695.052385] generic-usb 0003:0A5C:4502.0003: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
[23695.136028] usb 7-2.3: new full speed USB device using uhci_hcd and address 9
[23695.335789] usb 7-2.3: configuration #1 chosen from 1 choice
[23695.364514] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input13
[23695.373254] generic-usb 0003:0A5C:4503.0004: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
[23718.998136] wlan0: authenticate with AP 00:22:b0:f3:02:59
[23718.999915] wlan0: authenticated
[23718.999918] wlan0: associate with AP 00:22:b0:f3:02:59
[23719.006158] wlan0: RX AssocResp from 00:22:b0:f3:02:59 (capab=0x431 status=0 aid=1)
[23719.006161] wlan0: associated
[23765.400497] wlan0: disassociating by local choice (reason=3)
[23768.249395] wlan0: deauthenticated
[23896.454699] wlan0: authenticate with AP 00:22:b0:f3:02:59
[23896.457839] wlan0: authenticated
[23896.457846] wlan0: associate with AP 00:22:b0:f3:02:59
[23896.460928] wlan0: RX AssocResp from 00:22:b0:f3:02:59 (capab=0x431 status=0 aid=1)
[23896.460932] wlan0: associated
[24495.241860] wlan0: disassociating by local choice (reason=3)
[24498.333137] wlan0: deauthenticated
[24529.362334] wlan0: direct probe to AP 00:22:b0:f3:02:59 try 1
[24529.365792] wlan0 direct probe responded
[24529.365796] wlan0: authenticate with AP 00:22:b0:f3:02:59
[24529.368828] wlan0: authenticated
[24529.368831] wlan0: associate with AP 00:22:b0:f3:02:59
[24529.371979] wlan0: RX AssocResp from 00:22:b0:f3:02:59 (capab=0x431 status=0 aid=1)
[24529.371981] wlan0: associated
[38805.200826] UDF-fs: Partition marked readonly; forcing readonly mount
[38805.432600] UDF-fs INFO UDF: Mounting volume 'Мой диск', timestamp 2009/08/23 19:48 (10b4)
[38847.449170] usb 2-2: new high speed USB device using ehci_hcd and address 3
[38847.583919] usb 2-2: configuration #1 chosen from 1 choice
[38847.718515] Initializing USB Mass Storage driver...
[38847.719577] scsi4 : SCSI emulation for USB Mass Storage devices
[38847.719798] usbcore: registered new interface driver usb-storage
[38847.719802] USB Mass Storage support registered.
[38847.722655] usb-storage: device found at 3
[38847.722658] usb-storage: waiting for device to settle before scanning
[38852.720146] usb-storage: device scan complete
[38852.721004] scsi 4:0:0:0: Direct-Access 1024MB flash drive 1.0 PQ: 0 ANSI: 2
[38852.763956] sd 4:0:0:0: [sdb] 2015231 512-byte hardware sectors: (1.03 GB/983 MiB)
[38852.764603] sd 4:0:0:0: [sdb] Write Protect is off
[38852.764608] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
[38852.764611] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[38852.767736] sd 4:0:0:0: [sdb] 2015231 512-byte hardware sectors: (1.03 GB/983 MiB)
[38852.768633] sd 4:0:0:0: [sdb] Write Protect is off
[38852.768637] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
[38852.768639] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[38852.768646] sdb: sdb1
[38852.883295] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[38852.883368] sd 4:0:0:0: Attached scsi generic sg2 type 0
[38964.269183] usb 2-2: USB disconnect, address 3т.е. там я не нашел ничего про synaptic touchpad , но я знаю, что на многих моделях dell стоит этот тачпад... Под ХР я ставил драйвер на него.
Помогите определить подойдет ли мне этот драйвер ?
Почему у меня не проходит нигде что у меня стоит synaptic touchpad ?
