УРА!!!!!!!!
Заработал нормально этот FlatOut!!!
Код:
Section "DRI"
Mode 0666
EndSection
Section "Files"
# font server independent of the X server to render fonts.
FontPath "unix/:-1"
# minimal fonts to allow X to run without xfs
FontPath "/usr/share/fonts/misc:unscaled"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
Option "AIGLX" "off"
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:rwin_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "Q770"
HorizSync 30-70
VertRefresh 50-150
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "ATI Technologies Inc."
BoardName "ATI Radeon (fglrx)"
Driver "fglrx"
Option "UseInternalAGPGART" "no"
Option "DPMS"
Option "FSAAMSPosY1" "0.000000"
Option "StereoSyncEnable" "1"
Option "DesktopSetup" "single"
# === disable PnP Monitor ===
#Option "NoDDC"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAADisableGamma" "no"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
Option "ForceGenericCPU" "no"
Option "GammaCorrectionII" "0x00000000"
Option "VRefresh2" "unspecified"
Option "FSAAMSPosY5" "0.000000"
Option "CenterMode" "off"
Option "IgnoreEDID" "off"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
Option "FSAACustomizeMSPos" "no"
# === FSAA ===
Option "FSAAScale" "1"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
# Option "DesktopSetup" "0x00000000"
Option "HSync2" "unspecified"
Option "TVHStartAdj" "0"
Option "FSAAMSPosX0" "0.000000"
Option "no_dri" "no"
Option "GammaCorrectionI" "0x00000000"
Option "FSAAMSPosX1" "0.000000"
Option "UseInternalAGPGART" "no"
Option "BlockSignalsOnLock" "on"
Option "MonitorLayout" "AUTO, AUTO"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "FSAAMSPosY3" "0.000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "TVStandard" "NTSC-M"
Option "TVVPosAdj" "0"
Option "TVColorAdj" "0"
Option "FSAAMSPosY2" "0.000000"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVHSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "ScreenOverlap" "0"
# === QBS Support ===
Option "Stereo" "off"
Option "FSAAMSPosX3" "0.000000"
Option "TVVSizeAdj" "0"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection
Section "ServerLayout"
Screen "screen1"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
EndSection
Section "Extensions"
Option "Composite" "off"
EndSection
С этими параметрами, по крайней мере, у меня заработало..
[**@** ~]$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
Правда оно работает только без 3D десктопа.
И glxgear без 3D десктопа будет показывать в 5-10 раз меньше FSP чем с 3D десктопом.
cedega при тесте показывает всё заленым кроме 3D, но игрушка уже не по 2 кадра в 5 сек. работает, а полноценно...
Для желающих, если кому не надоело, может кто сможет повысить FSP?
У меня Mendriva Linux 2007 FREE, конфа компа такая: Pentium 4 530J 3.0Ghz/1024Gb RAM/Video X1600XT 256Mb DDR3,128Bit/MB Gigabyte 945PL-G/ HDD 200Gb Seagate SATAII/POWER HuntKey 500W. Устанавливаю дрова скачаные с официального сайта. После установки то компонент не найден, то ошибка в xorq.conf, драйвер конфигурироваться не хочет т.к. ищет файл aticonfig в /usr/, там этого файла нет! Он лежит в другой папке(точно сказать не могу) перенести его оттуда я не могу - не дает, даже под ROOT. 
Может я что то делаю не так... напишите по шагам установку драйверов (как для чайника). 
4Гб выкачал!
