Invalid PBLK length

[Raistlin]

ACPI: Invalid PBLK length [5]
Такое сообщение получаю при загрузке любого популярного дистрибутива, но мне интересен именно debian(5.03). Система работает, долго не тестировал , однако люди пишут что могут возникать проблемы на фоне этой ошибки, фризы, зависания, рандомные отключения
Железо: ASUS TUSL2-C (latest BIOS) / CPU Tualatin / BIOS -ACPI Enabled
После гугления и поиска по форуму есть такие мысли
ядро отбрасывает некоторые опции - тротлинг цп, speed step и в этом нет ничего страшного
пересборка ядра с отключением некоторых модулей (APM?)

В интернетах куча баг репортов на эту тему, решения нет как и каких то четких разъяснений ЧТО это. Однако на старых ядрах linux этого нет.

[samodelkins]

Raistlin, покажите /var/log/dmesg , а потом будем думать.

[Raistlin]

Извиняюсь за задержку, вот лог. Но установил Debian testing (net install)

Код: Выделить всё

[    7.131139] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    7.131160] ACPI: Power Button [PWRF]
[    7.131308] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    7.131318] ACPI: Power Button [PWRB]
[    7.147582] ACPI: Invalid PBLK length [5]
[    7.147723] processor ACPI_CPU:00: registered as cooling_device0
[    7.278608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.303166] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.563862] intel_rng: FWH not detected
[    7.600633] parport_pc 00:08: reported by Plug and Play ACPI
[    7.600741] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]

Код: Выделить всё

[    0.086474] ACPI: EC: Look up EC in DSDT
[    0.096077] ACPI: Interpreter enabled
[    0.096098] ACPI: (supports S0 S1 S4 S5)
[    0.096149] ACPI: Using IOAPIC for interrupt routing
[    0.118599] ACPI: No dock devices found.
[    0.118636] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.118818] pci 0000:00:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff]
[    0.119051] pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[    0.119060] pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
[    0.119118] pci 0000:00:1f.1: reg 20 io port: [0xb800-0xb80f]
[    0.119192] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f]
[    0.119265] pci 0000:00:1f.3: reg 20 io port: [0xe800-0xe80f]
[    0.119336] pci 0000:00:1f.4: reg 20 io port: [0xb000-0xb01f]
[    0.119416] pci 0000:01:00.0: reg 10 32bit mmio: [0xee000000-0xeeffffff]
[    0.119428] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
[    0.119456] pci 0000:01:00.0: reg 30 32bit mmio: [0xeffe0000-0xefffffff]
[    0.119532] pci 0000:00:01.0: bridge 32bit mmio: [0xee000000-0xefdfffff]
[    0.119542] pci 0000:00:01.0: bridge 32bit mmio pref: [0xeff00000-0xfbffffff]
[    0.119610] pci 0000:02:0c.0: reg 10 io port: [0xd800-0xd83f]
[    0.119665] pci 0000:02:0c.0: supports D2
[    0.119712] pci 0000:02:0d.0: reg 10 io port: [0xd400-0xd4ff]
[    0.119724] pci 0000:02:0d.0: reg 14 32bit mmio: [0xed800000-0xed8000ff]
[    0.119774] pci 0000:02:0d.0: supports D1 D2
[    0.119808] pci 0000:00:1e.0: transparent bridge
[    0.119818] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[    0.119827] pci 0000:00:1e.0: bridge 32bit mmio: [0xed800000-0xedffffff]
[    0.119836] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xefe00000-0xefefffff]
[    0.119855] pci_bus 0000:00: on NUMA node 0
[    0.119872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.120100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.120201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[    0.173253] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.173494] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.173699] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.173936] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.174142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.174350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.174558] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.174795] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.175628] PCI: Using ACPI for IRQ routing
[    0.176397] pnp: PnP ACPI init
[    0.176427] ACPI: bus type pnp registered
[    0.185647] pnp: PnP ACPI: found 12 devices
[    0.185655] ACPI: ACPI bus type pnp unregistered
[    0.185667] PnPBIOS: Disabled by ACPI PNP
[    0.185703] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.185712] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    0.185720] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[    0.185729] system 00:00: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.185737] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
[    0.185757] system 00:02: ioport range 0x3f0-0x3f1 has been reserved
[    0.185764] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.185781] system 00:03: ioport range 0xe400-0xe47f has been reserved
[    0.185789] system 00:03: ioport range 0xec00-0xec3f has been reserved
[    0.221513] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.221522] pci 0000:00:01.0:   IO window: disabled
[    0.221533] pci 0000:00:01.0:   MEM window: 0xee000000-0xefdfffff
[    0.221541] pci 0000:00:01.0:   PREFETCH window: 0x000000eff00000-0x000000fbffffff
[    0.221555] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.221563] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
[    0.221572] pci 0000:00:1e.0:   MEM window: 0xed800000-0xedffffff
[    0.221581] pci 0000:00:1e.0:   PREFETCH window: 0x000000efe00000-0x000000efefffff
[    0.221608] pci 0000:00:01.0: setting latency timer to 64
[    0.221621] pci 0000:00:1e.0: setting latency timer to 64
[    0.221633] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.221641] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.221649] pci_bus 0000:01: resource 1 mem: [0xee000000-0xefdfffff]
[    0.221656] pci_bus 0000:01: resource 2 pref mem [0xeff00000-0xfbffffff]
[    0.221663] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.221670] pci_bus 0000:02: resource 1 mem: [0xed800000-0xedffffff]
[    0.221677] pci_bus 0000:02: resource 2 pref mem [0xefe00000-0xefefffff]
[    0.221683] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.221690] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.221835] NET: Registered protocol family 2
[    0.222110] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.222904] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.223326] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.223808] TCP: Hash tables configured (established 16384 bind 16384)
[    0.223816] TCP reno registered
[    0.224333] NET: Registered protocol family 1
[    0.224521] Trying to unpack rootfs image as initramfs...
[    0.724119] Switched to high resolution mode on CPU 0
[    0.790232] Freeing initrd memory: 7127k freed
[    0.828280] Simple Boot Flag at 0x3a set to 0x1
[    0.829547] audit: initializing netlink socket (disabled)
[    0.829599] type=2000 audit(1258828992.828:1): initialized
[    0.830085] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.830276] VFS: Disk quotas dquot_6.5.2
[    0.830374] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.830521] msgmni has been set to 1005
[    0.831214] alg: No test for stdrng (krng)
[    0.831432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.831441] io scheduler noop registered
[    0.831446] io scheduler anticipatory registered
[    0.831451] io scheduler deadline registered
[    0.831485] io scheduler cfq registered (default)
[    0.831586] pci 0000:01:00.0: Boot video device
[    0.832638] isapnp: Scanning for PnP cards...
[    1.185314] isapnp: No Plug & Play device found
[    1.194261] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.194487] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.194696] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.195607] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.195951] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.200489] brd: module loaded
[    1.200757] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.200764] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.201383] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.201807] mice: PS/2 mouse device common for all mice
[    1.201971] rtc_cmos 00:05: RTC can wake from S4
[    1.202191] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.202234] rtc0: alarms up to one month, 242 bytes nvram
[    1.202344] cpuidle: using governor ladder
[    1.202350] cpuidle: using governor menu
[    1.202365] No iBFT detected.
[    1.203400] TCP cubic registered
[    1.203492] NET: Registered protocol family 10
[    1.204718] lo: Disabled Privacy Extensions
[    1.205567] Mobile IPv6
[    1.205576] NET: Registered protocol family 17
[    1.205629] Using IPI No-Shortcut mode
[    1.206202] registered taskstats version 1
[    1.206458] rtc_cmos 00:05: setting system clock to 2009-11-21 18:43:13 UTC (1258828993)
[    1.206596] Freeing unused kernel memory: 320k freed
[    1.207769] Write protecting the kernel text: 2176k
[    1.207816] Write protecting the kernel read-only data: 784k
[    1.222938] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.668835] Linux agpgart interface v0.103
[    1.722611] Uniform Multi-Platform E-IDE driver
[    1.891175] 8139too Fast Ethernet driver 0.9.28
[    1.891246] 8139too 0000:02:0d.0: enabling device (0004 -> 0007)
[    1.891278] 8139too 0000:02:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.893248] eth0: RealTek RTL8139 at 0xd400, 00:c0:df:0b:b3:a4, IRQ 21
[    1.893255] eth0:  Identified 8139 chip type 'RTL-8139C'
[    1.940458] agpgart-intel 0000:00:00.0: Intel i815 Chipset
[    1.943338] agpgart-intel 0000:00:00.0: AGP aperture is 32M @ 0xfc000000
[    2.004399] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.050772] piix 0000:00:1f.1: IDE controller (0x8086:0x244b rev 0x02)
[    2.050831] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[    2.050845]     ide0: BM-DMA at 0xb800-0xb807
[    2.050865]     ide1: BM-DMA at 0xb808-0xb80f
[    2.050876] Probing IDE interface ide0...
[    2.060535] usbcore: registered new interface driver usbfs
[    2.060614] usbcore: registered new interface driver hub
[    2.061934] usbcore: registered new device driver usb
[    2.075984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.087764] uhci_hcd: USB Universal Host Controller Interface driver
[    2.336159] hda: WDC WD400BB-00FJA0, ATA DISK drive
[    3.008131] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    3.008242] hda: UDMA/100 mode selected
[    3.008338] Probing IDE interface ide1...
[    3.744154] hdc: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
[    4.416116] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    4.416353] hdc: UDMA/66 mode selected
[    4.416516] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.436860] ide1 at 0x170-0x177,0x376 on irq 15
[    4.442709] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    4.442732] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[    4.442741] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[    4.442864] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[    4.442927] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000b400
[    4.443045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    4.443053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.443060] usb usb1: Product: UHCI Host Controller
[    4.443066] usb usb1: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[    4.443071] usb usb1: SerialNumber: 0000:00:1f.2
[    4.443228] usb usb1: configuration #1 chosen from 1 choice
[    4.443309] hub 1-0:1.0: USB hub found
[    4.443336] hub 1-0:1.0: 2 ports detected
[    4.496509] SCSI subsystem initialized
[    4.498602] uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    4.498627] uhci_hcd 0000:00:1f.4: setting latency timer to 64
[    4.498635] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[    4.498750] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[    4.498819] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000b000
[    4.498941] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.498949] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.498956] usb usb2: Product: UHCI Host Controller
[    4.498961] usb usb2: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[    4.498967] usb usb2: SerialNumber: 0000:00:1f.4
[    4.499138] usb usb2: configuration #1 chosen from 1 choice
[    4.499219] hub 2-0:1.0: USB hub found
[    4.499244] hub 2-0:1.0: 2 ports detected
[    4.576233] libata version 3.00 loaded.
[    4.610107] ide-gd driver 1.18
[    4.610202] hda: max request size: 128KiB
[    4.629228] ide-cd driver 5.00
[    4.630278] hda: Host Protected Area detected.
[    4.630281]     current capacity is 78163247 sectors (40019 MB)
[    4.630284]     native  capacity is 78165360 sectors (40020 MB)
[    4.630454] hda: Host Protected Area disabled.
[    4.630463] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
[    4.630584] hda: cache flushes supported
[    4.630736]  hda: hda1 hda2 < hda5 >
[    4.673052] ide-cd: hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[    4.673070] Uniform CD-ROM driver Revision: 3.20
[    4.785905] usb 1-1: new low speed USB device using uhci_hcd and address 2
[    4.965006] usb 1-1: New USB device found, idVendor=045e, idProduct=00cb
[    4.965017] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.965024] usb 1-1: Product: Microsoft Basic Optical Mouse v2.0
[    4.965030] usb 1-1: Manufacturer: Microsoft
[    4.965262] usb 1-1: configuration #1 chosen from 1 choice
[    4.996961] PM: Starting manual resume from disk
[    5.020502] usbcore: registered new interface driver hiddev
[    5.064323] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/input/input1
[    5.064484] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1f.2-1/input0
[    5.064538] usbcore: registered new interface driver usbhid
[    5.064546] usbhid: v2.6:USB HID core driver
[    5.092424] kjournald starting.  Commit interval 5 seconds
[    5.092455] EXT3-fs: mounted filesystem with ordered data mode.
[    6.887644] udev: starting version 146
[    7.131139] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp

[Raistlin]

Система тем временем работает вполне адекватно, кто нибудь может объяснить что это за ошибка? логи предоставил

[samodelkins]

Попробую объяснить более популярно и подробно. Проблема в основном с матерями Asus, а именно с тем, что они патчат исходную прошивку под свои нужды, в основном это касается системы ACPI. Поскольку ядро работает со стандартными опциями BIOS, то такие параметры ему просто не знакомы, а Asus не торопится раскрывать секреты. Страшного в этом ничего нет. Просто пропадают некоторые возможности материнки, но на обычной работе это не сказывается.