хотел бы попросить помощи с 3D эфектами в Elive (Debian) с графической картой Intel HD4500 GM45.
Enlightenment 17 работает нормально, без проблем. Но как только подгружаю модуль ecomorph (compiz для e17), производительность падает, даже окна перетаскивать нельзя.
И вообще, compiz, даже если его загрузить с Sabayana тоже тормозит.
Перепробовал многое, в т.ч. :
пересборка ядра,
пересборка libdrm, xorg
пробовал согласно инструкциям на wikicompiz и офф. Intel
xorg.log
Код: Выделить всё
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru(phonetic)"
Option "XkbOptions" "grp:altshift:toggle"
EndSection
Section "ServerFlags"
Option "Composite" "on"
Option "Xinerama" "off"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "onfigured Video Device"
Driver "Intel"
Option "RenderAccel" "true"
BusID "PCI:0:2:0"
Option "AccelMethod" "UXA"
Option "MigrationHeuristic" "greedy"
Option "ExaNoComposite" "true"
EndSection
Section "Device"
# Identifier "Configured Video Device1"
Identifier "Intel i915"
Driver "Intel"
Option "RenderAccel" "true"
BusID "PCI:0:2:1"
Option "ForceEnablePipeA" "true"
Option "XAANoOffscreenPixmaps" "true"
Option "AccelMethod" "UXA"
Option "MigrationHeuristic" "greedy"
Option "ExaNoComposite" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device1"
SubSection "Display"
Depth 24
Viewport 0 0
Virtual 3000 3000
EndSubSection
EndSection
Section "Extensions"
Option "RANDR" "enable"
Option "RENDER" "enable"
Option "Composite" "true"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SHMConfig"
# Option "MinSpeed" "0.09"
# Option "MaxSpeed" "0.18"
# Option "AccelFactor" "0.0015"
# Option "VertScrollDelta"
# Option "MaxTapTime"
Option "VertEdgeScroll"
Option "VertTwoFingerScroll"
Option "HorizTwoFingerScroll"
Option "LockedDrags"
#Option "RTCornerButton"
#Option "LTCornerButton"
#Option "RBCornerButton"
#Option "LBCornerButton"
Option "LockedDrags"
Option "MaxTapMove"
Option "EdgeMotionMaxSpeed"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
# InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSectioncat /proc/mtrr
Код: Выделить всё
reg00: base=0x000000000 ( 0MB), size=32768MB, count=1: write-back
reg01: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable
reg02: base=0x07dc00000 ( 2012MB), size= 4MB, count=1: uncachable
reg03: base=0x07e000000 ( 2016MB), size= 32MB, count=1: uncachabledmesg
Код: Выделить всё
0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30.9-elive-686 (root@Zeus) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Oct 9 10:25:06 CEST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d38d400 (usable)
[ 0.000000] BIOS-e820: 000000007d38d400 - 000000007d38f400 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007d38f400 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7d38d max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 07DC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000007dc00000 - 0000000080000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 376fb000 - 37fefe68
[ 0.000000] Allocated new RAMDISK: 00638000 - 00f2ce68
[ 0.000000] Move RAMDISK from 00000000376fb000 - 0000000037fefe67 to 00638000 - 00f2ce67
[ 0.000000] ACPI: RSDP 000fbd10 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 7d391e00 0006C (v01 DELL M09 27D9080B ASL 00000061)
[ 0.000000] ACPI: FACP 7d391c9c 000F4 (v04 DELL M09 27D9080B ASL 00000061)
[ 0.000000] ACPI: DSDT 7d392400 06707 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 7d3a0c00 00040
[ 0.000000] ACPI: HPET 7d391f00 00038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: ____ 7d3a0400 00030 (v01 DELL M09 27D9080B ASL 00000061)
[ 0.000000] ACPI: APIC 7d392000 00068 (v01 DELL M09 27D9080B ASL 00000047)
[ 0.000000] ACPI: ASF! 7d391c00 00076 (v32 DELL M09 27D9080B ASL 00000061)
[ 0.000000] ACPI: MCFG 7d391fc0 0003E (v16 DELL M09 27D9080B ASL 00000061)
[ 0.000000] ACPI: TCPA 7d392300 00032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: SLIC 7d39209c 00176 (v01 DELL M09 27D9080B ASL 00000061)
[ 0.000000] ACPI: SSDT 7d39032d 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1115MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000634d64] TEXT DATA BSS ==> [0000100000 - 0000634d64]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0000635000 - 000063717c] BRK ==> [0000635000 - 000063717c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000638000 - 0000f2ce68] NEW RAMDISK ==> [0000638000 - 0000f2ce68]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007d38d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007d38d
[ 0.000000] On node 0 totalpages: 512812
[ 0.000000] free_area_init_node: node 0, pgdat c04f21a0, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2232 pages used for memmap
[ 0.000000] HighMem zone: 283351 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages at c1fb2000, static data 22780 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508804
[ 0.000000] Kernel command line: root=UUID=5409f18a-165a-4e91-8c86-ef461ae36f25 vga=791 splash=silent quiet
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] NR_IRQS:1280
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.585 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Initializing HighMem for node 0 (000377fe:0007d38d)
[ 0.000999] Memory: 2018888k/2051636k available (3037k kernel code, 31504k reserved, 1207k data, 364k init, 1142332k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc052c000 - 0xc0587000 ( 364 kB)
[ 0.000999] .data : 0xc03f76fb - 0xc0525644 (1207 kB)
[ 0.000999] .text : 0xc0100000 - 0xc03f76fb (3037 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.17 BogoMIPS (lpj=2393585)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Disabled at boot.
[ 0.000999] Mount-cache hash table entries: 512
[ 0.000999] Initializing cgroup subsys ns
[ 0.000999] Initializing cgroup subsys cpuacct
[ 0.000999] Initializing cgroup subsys devices
[ 0.000999] Initializing cgroup subsys freezer
[ 0.000999] Initializing cgroup subsys net_cls
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 3072K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#0.
[ 0.000999] using mwait in idle threads.
[ 0.000999] Checking 'hlt' instruction... OK.
[ 0.005004] ACPI: Core revision 20090320
[ 0.013457] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024101] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
[ 0.024996] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 4787.74 BogoMIPS (lpj=2393872)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 3072K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#1.
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.096365] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
[ 0.096376] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.097032] Brought up 2 CPUs
[ 0.097035] Total of 2 processors activated (9574.91 BogoMIPS).
[ 0.097081] CPU0 attaching sched-domain:
[ 0.097083] domain 0: span 0-1 level MC
[ 0.097085] groups: 0 1
[ 0.097089] CPU1 attaching sched-domain:
[ 0.097090] domain 0: span 0-1 level MC
[ 0.097092] groups: 1 0
[ 0.097144] net_namespace: 1088 bytes
[ 0.097144] Booting paravirtualized kernel on bare hardware
[ 0.097144] regulator: core version 0.5
[ 0.097996] NET: Registered protocol family 16
[ 0.098007] ACPI: bus type pci registered
[ 0.098009] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.098011] PCI: MCFG area at f8000000 reserved in E820
[ 0.098013] PCI: Using MMCONFIG for extended config space
[ 0.098014] PCI: Using configuration type 1 for base access
[ 0.099021] bio: create slab <bio-0> at 0
[ 0.099561] ACPI: EC: Look up EC in DSDT
[ 0.100130] ACPI: BIOS _OSI(Linux) query ignored
[ 0.128998] ACPI: SSDT 7d3a0c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
[ 0.156994] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.162157] ACPI: Interpreter enabled
[ 0.162162] ACPI: (supports S0 S3 S4 S5)
[ 0.162177] ACPI: Using IOAPIC for interrupt routing
[ 0.256059] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.256059] ACPI: EC: driver started in interrupt mode
[ 0.257067] ACPI: No dock devices found.
[ 0.257077] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.257098] DMAR: Forcing write-buffer flush capability
[ 0.257976] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
[ 0.257982] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[ 0.257986] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
[ 0.258017] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
[ 0.258127] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.258213] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.258300] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.258387] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.258450] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.258455] pci 0000:00:1a.7: PME# disabled
[ 0.258507] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-0xf6afffff]
[ 0.258563] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.258567] pci 0000:00:1b.0: PME# disabled
[ 0.258646] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.258651] pci 0000:00:1c.0: PME# disabled
[ 0.258735] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.258739] pci 0000:00:1c.1: PME# disabled
[ 0.258824] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.258828] pci 0000:00:1c.4: PME# disabled
[ 0.258899] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.258989] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.259075] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.259163] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.259225] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.259230] pci 0000:00:1d.7: PME# disabled
[ 0.259468] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.259475] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.259482] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.259489] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.259496] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[ 0.259503] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[ 0.259547] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.259551] pci 0000:00:1f.2: PME# disabled
[ 0.259589] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-0xf6afbfff]
[ 0.259606] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.259812] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fe000-0xf69fffff]
[ 0.259928] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.259939] pci 0000:0c:00.0: PME# disabled
[ 0.260032] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
[ 0.260272] pci 0000:09:00.0: reg 10 64bit mmio: [0xf68e0000-0xf68effff]
[ 0.260291] pci 0000:09:00.0: reg 18 64bit mmio: [0xf68f0000-0xf68fffff]
[ 0.260378] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.260383] pci 0000:09:00.0: PME# disabled
[ 0.260459] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6800000-0xf68fffff]
[ 0.260508] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.260530] pci 0000:02:01.0: supports D1 D2
[ 0.260532] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260536] pci 0000:02:01.0: PME# disabled
[ 0.260575] pci 0000:02:01.1: reg 10 32bit mmio: [0xf67ff800-0xf67fffff]
[ 0.260629] pci 0000:02:01.1: supports D1 D2
[ 0.260631] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260635] pci 0000:02:01.1: PME# disabled
[ 0.260675] pci 0000:02:01.2: reg 10 32bit mmio: [0xf67ff700-0xf67ff7ff]
[ 0.260730] pci 0000:02:01.2: supports D1 D2
[ 0.260731] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260735] pci 0000:02:01.2: PME# disabled
[ 0.260801] pci 0000:00:1e.0: transparent bridge
[ 0.260808] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6700000-0xf67fffff]
[ 0.260855] pci_bus 0000:00: on NUMA node 0
[ 0.260859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.261055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.261144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.261204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.261265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.272040] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.272151] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[ 0.272259] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *5
[ 0.272369] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.272477] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.272588] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.273046] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.273145] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.273200] PCI: Using ACPI for IRQ routing
[ 0.276969] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.276973] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.285971] pnp: PnP ACPI init
[ 0.285977] ACPI: bus type pnp registered
[ 0.357480] pnp: PnP ACPI: found 14 devices
[ 0.357482] ACPI: ACPI bus type pnp unregistered
[ 0.357484] PnPBIOS: Disabled by ACPI PNP
[ 0.357492] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 0.357495] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 0.357500] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.357505] system 00:0a: ioport range 0xcb0-0xcbb has been reserved
[ 0.357507] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.357512] system 00:0b: ioport range 0x900-0x92f has been reserved
[ 0.357514] system 00:0b: ioport range 0x931-0x933 has been reserved
[ 0.357516] system 00:0b: ioport range 0x935-0x97f has been reserved
[ 0.357518] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.357520] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[ 0.357523] system 00:0b: ioport range 0x1008-0x100f has been reserved
[ 0.357527] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[ 0.357529] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[ 0.357531] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[ 0.357534] system 00:0c: ioport range 0x1060-0x107f has been reserved
[ 0.357536] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[ 0.357538] system 00:0c: ioport range 0x1100-0x111f has been reserved
[ 0.357540] system 00:0c: ioport range 0x1010-0x102f has been reserved
[ 0.357542] system 00:0c: ioport range 0x809-0x809 has been reserved
[ 0.357547] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[ 0.357549] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.357552] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.357554] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.357556] system 00:0d: iomem range 0x100000-0x7d38d3ff could not be reserved
[ 0.357559] system 00:0d: iomem range 0x7d38d400-0x7dafffff could not be reserved
[ 0.357561] system 00:0d: iomem range 0x7db00000-0x7dbfffff has been reserved
[ 0.357563] system 00:0d: iomem range 0xffe80000-0xffffffff has been reserved
[ 0.357565] system 00:0d: iomem range 0xffa80000-0xffbfffff has been reserved
[ 0.357568] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.357570] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.357572] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.357574] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.357577] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.357579] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.357581] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.357583] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.357586] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 0.357588] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.357590] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.392207] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.392209] pci 0000:00:1c.0: IO window: disabled
[ 0.392214] pci 0000:00:1c.0: MEM window: disabled
[ 0.392218] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.392225] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.392226] pci 0000:00:1c.1: IO window: disabled
[ 0.392232] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
[ 0.392236] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.392243] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[ 0.392244] pci 0000:00:1c.4: IO window: disabled
[ 0.392249] pci 0000:00:1c.4: MEM window: 0xf6800000-0xf68fffff
[ 0.392253] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.392265] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 0.392267] pci 0000:02:01.0: IO window: 0x002000-0x0020ff
[ 0.392271] pci 0000:02:01.0: IO window: 0x002400-0x0024ff
[ 0.392275] pci 0000:02:01.0: PREFETCH window: 0x88000000-0x8bffffff
[ 0.392279] pci 0000:02:01.0: MEM window: 0x8c000000-0x8fffffff
[ 0.392284] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.392287] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.392292] pci 0000:00:1e.0: MEM window: 0xf6700000-0xf67fffff
[ 0.392296] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
[ 0.392311] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.392316] pci 0000:00:1c.0: setting latency timer to 64
[ 0.392324] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.392328] pci 0000:00:1c.1: setting latency timer to 64
[ 0.392336] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.392340] pci 0000:00:1c.4: setting latency timer to 64
[ 0.392347] pci 0000:00:1e.0: setting latency timer to 64
[ 0.392356] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.392361] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.392363] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.392365] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
[ 0.392367] pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff]
[ 0.392369] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.392371] pci_bus 0000:02: resource 1 mem: [0xf6700000-0xf67fffff]
[ 0.392373] pci_bus 0000:02: resource 2 pref mem [0x88000000-0x8bffffff]
[ 0.392375] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.392377] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.392378] pci_bus 0000:03: resource 0 io: [0x2000-0x20ff]
[ 0.392380] pci_bus 0000:03: resource 1 io: [0x2400-0x24ff]
[ 0.392382] pci_bus 0000:03: resource 2 pref mem [0x88000000-0x8bffffff]
[ 0.392384] pci_bus 0000:03: resource 3 mem: [0x8c000000-0x8fffffff]
[ 0.392418] NET: Registered protocol family 2
[ 0.404017] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.404233] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.404478] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.404608] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.404610] TCP reno registered
[ 0.407022] NET: Registered protocol family 1
[ 0.407058] Trying to unpack rootfs image as initramfs...
[ 0.502422] Switched to high resolution mode on CPU 1
[ 0.502984] Switched to high resolution mode on CPU 0
[ 0.610802] Freeing initrd memory: 9171k freed
[ 0.615048] audit: initializing netlink socket (disabled)
[ 0.615062] type=2000 audit(1264514053.614:1): initialized
[ 0.615240] highmem bounce pool size: 64 pages
[ 0.615244] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.615306] VFS: Disk quotas dquot_6.5.2
[ 0.615329] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.615444] aufs 2-standalone.tree-30-20090921
[ 0.615448] msgmni has been set to 1731
[ 0.615605] alg: No test for stdrng (krng)
[ 0.615643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.615646] io scheduler noop registered
[ 0.615647] io scheduler anticipatory registered
[ 0.615648] io scheduler deadline registered
[ 0.615658] io scheduler cfq registered (default)
[ 0.615669] pci 0000:00:02.0: Boot video device
[ 0.615960] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.615978] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.616185] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.616201] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.616407] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.616423] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.618940] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 3072k, total 32704k
[ 0.618943] vesafb: mode is 1024x768x16, linelength=2048, pages=20
[ 0.618944] vesafb: scrolling: redraw
[ 0.618946] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.631063] Console: switching to colour frame buffer device 128x48
[ 0.643087] fb0: VESA VGA frame buffer device
[ 0.643144] isapnp: Scanning for PnP cards...
[ 0.955961] isapnp: No Plug & Play device found
[ 0.955963] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.956096] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.956557] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.957679] brd: module loaded
[ 0.957753] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.958047] i8042.c: Warning: Keylock active.
[ 0.961834] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.961838] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.961927] mice: PS/2 mouse device common for all mice
[ 0.961975] rtc_cmos 00:03: RTC can wake from S4
[ 0.962015] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.962042] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.962089] cpuidle: using governor ladder
[ 0.962091] cpuidle: using governor menu
[ 0.962094] No iBFT detected.
[ 0.962354] TCP cubic registered
[ 0.962384] NET: Registered protocol family 10
[ 0.962703] lo: Disabled Privacy Extensions
[ 0.962931] Mobile IPv6
[ 0.962933] NET: Registered protocol family 17
[ 0.962938] Using IPI No-Shortcut mode
[ 0.963026] TuxOnIce 3.0.1 (http://tuxonice.net)
[ 0.963068] TuxOnIce: Resume= parameter is empty. Hibernating will be disabled.
[ 0.963075] registered taskstats version 1
[ 0.963195] rtc_cmos 00:03: setting system clock to 2010-01-26 13:54:14 UTC (1264514054)
[ 0.963238] Freeing unused kernel memory: 364k freed
[ 0.963396] Write protecting the kernel text: 3040k
[ 0.963420] Write protecting the kernel read-only data: 828k
[ 0.964273] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.054530] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.054538] ACPI: Thermal Zone [THM] (47 C)
[ 1.202588] usbcore: registered new interface driver usbfs
[ 1.202612] usbcore: registered new interface driver hub
[ 1.202640] usbcore: registered new device driver usb
[ 1.212844] SCSI subsystem initialized
[ 1.227102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.227134] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.227150] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.227153] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.227185] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.231076] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.231082] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.231095] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.234184] tg3.c:v3.98 (February 25, 2009)
[ 1.234351] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.234359] tg3 0000:09:00.0: setting latency timer to 64
[ 1.236311] tg3 0000:09:00.0: PME# disabled
[ 1.240747] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0263]
[ 1.241918] eth0: Tigon3 [partno(BCM95761e) rev 5761100] (PCI Express) MAC address 00:25:64:5e:24:02
[ 1.241921] eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.241923] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.241925] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.243166] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.243207] libata version 3.00 loaded.
[ 1.249248] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.249269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.249271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.249273] usb usb1: Product: EHCI Host Controller
[ 1.249275] usb usb1: Manufacturer: Linux 2.6.30.9-elive-686 ehci_hcd
[ 1.249276] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.249330] usb usb1: configuration #1 chosen from 1 choice
[ 1.249354] hub 1-0:1.0: USB hub found
[ 1.249360] hub 1-0:1.0: 6 ports detected
[ 1.249473] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.249482] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.249485] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.249505] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.249539] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 1.249567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.249569] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.249571] usb usb2: Product: UHCI Host Controller
[ 1.249572] usb usb2: Manufacturer: Linux 2.6.30.9-elive-686 uhci_hcd
[ 1.249574] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.249610] usb usb2: configuration #1 chosen from 1 choice
[ 1.249631] hub 2-0:1.0: USB hub found
[ 1.249637] hub 2-0:1.0: 2 ports detected
[ 1.249712] ahci 0000:00:1f.2: version 3.0
[ 1.249721] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.249766] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.249814] ahci: SSS flag set, parallel bus scan disabled
[ 1.249849] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.249852] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
[ 1.249857] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.253139] scsi0 : ahci
[ 1.253211] scsi1 : ahci
[ 1.253245] scsi2 : ahci
[ 1.253279] scsi3 : ahci
[ 1.253312] scsi4 : ahci
[ 1.253345] scsi5 : ahci
[ 1.253748] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 27
[ 1.253751] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 27
[ 1.253753] ata3: DUMMY
[ 1.253754] ata4: DUMMY
[ 1.253756] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 27
[ 1.253759] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 27
[ 1.253798] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.253819] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.253822] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.253841] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 1.257752] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.257757] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.257762] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.268645] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.268664] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.268667] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.268669] usb usb3: Product: EHCI Host Controller
[ 1.268670] usb usb3: Manufacturer: Linux 2.6.30.9-elive-686 ehci_hcd
[ 1.268672] usb usb3: SerialNumber: 0000:00:1d.7
[ 1.268727] usb usb3: configuration #1 chosen from 1 choice
[ 1.268751] hub 3-0:1.0: USB hub found
[ 1.268757] hub 3-0:1.0: 6 ports detected
[ 1.268878] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.268886] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.268890] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.268909] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.268943] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 1.268970] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.268972] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.268973] usb usb4: Product: UHCI Host Controller
[ 1.268975] usb usb4: Manufacturer: Linux 2.6.30.9-elive-686 uhci_hcd
[ 1.268977] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.269018] usb usb4: configuration #1 chosen from 1 choice
[ 1.269039] hub 4-0:1.0: USB hub found
[ 1.269044] hub 4-0:1.0: 2 ports detected
[ 1.269119] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.269125] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.269128] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.269143] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.269167] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 1.269192] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.269194] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.269195] usb usb5: Product: UHCI Host Controller
[ 1.269197] usb usb5: Manufacturer: Linux 2.6.30.9-elive-686 uhci_hcd
[ 1.269198] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.269233] usb usb5: configuration #1 chosen from 1 choice
[ 1.269255] hub 5-0:1.0: USB hub found
[ 1.269260] hub 5-0:1.0: 2 ports detected
[ 1.269336] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.269341] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.269345] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.269361] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.269385] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 1.269410] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.269412] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.269414] usb usb6: Product: UHCI Host Controller
[ 1.269415] usb usb6: Manufacturer: Linux 2.6.30.9-elive-686 uhci_hcd
[ 1.269417] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.269452] usb usb6: configuration #1 chosen from 1 choice
[ 1.269472] hub 6-0:1.0: USB hub found
[ 1.269477] hub 6-0:1.0: 2 ports detected
[ 1.269551] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.269557] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.269559] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.269575] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.269600] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 1.269627] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.269629] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.269630] usb usb7: Product: UHCI Host Controller
[ 1.269632] usb usb7: Manufacturer: Linux 2.6.30.9-elive-686 uhci_hcd
[ 1.269633] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.269668] usb usb7: configuration #1 chosen from 1 choice
[ 1.269688] hub 7-0:1.0: USB hub found
[ 1.269693] hub 7-0:1.0: 2 ports detected
[ 1.269770] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.269776] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.269778] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.269794] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.269820] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.269847] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.269849] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.269851] usb usb8: Product: UHCI Host Controller
[ 1.269852] usb usb8: Manufacturer: Linux 2.6.30.9-elive-686 uhci_hcd
[ 1.269854] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.269889] usb usb8: configuration #1 chosen from 1 choice
[ 1.269911] hub 8-0:1.0: USB hub found
[ 1.269916] hub 8-0:1.0: 2 ports detected
[ 1.362899] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 1.362903] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 1.362906] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 1.362913] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 1.362915] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 1.363095] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf6700000 - 0xf67fffff
[ 1.363097] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 1.363513] firewire_ohci 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.422006] firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10
[ 1.572021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.573184] ata1.00: ATA-8: WDC WD2500BJKT-75F4T0, 11.01A11, max UDMA/133
[ 1.573187] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 1.574433] ata1.00: configured for UDMA/133
[ 1.585091] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BJKT-7 11.0 PQ: 0 ANSI: 5
[ 1.922043] firewire_core: created device fw0: GUID 464fc00006724490, S400
[ 1.961018] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 2.122777] usb 7-1: New USB device found, idVendor=413c, idProduct=2003
[ 2.122779] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.122781] usb 7-1: Product: Dell USB Keyboard
[ 2.122782] usb 7-1: Manufacturer: Dell
[ 2.122827] usb 7-1: configuration #1 chosen from 1 choice
[ 2.308028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.311188] ata2.00: ATAPI: PLDS DVD+/-RW DS-8A4S, JD11, max UDMA/100, ATAPI AN
[ 2.313057] ata2.00: configured for UDMA/100
[ 2.328812] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A4S JD11 PQ: 0 ANSI: 5
[ 2.331257] usb 7-2: new low speed USB device using uhci_hcd and address 3
[ 2.493842] usb 7-2: New USB device found, idVendor=046d, idProduct=c016
[ 2.493844] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.493846] usb 7-2: Product: Optical USB Mouse
[ 2.493847] usb 7-2: Manufacturer: Logitech
[ 2.493891] usb 7-2: configuration #1 chosen from 1 choice
[ 2.504386] usbcore: registered new interface driver hiddev
[ 2.519052] input: Dell Dell USB Keyboard as /class/input/input1
[ 2.519085] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1/input0
[ 2.530992] input: Logitech Optical USB Mouse as /class/input/input2
[ 2.531037] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2/input0
[ 2.531047] usbcore: registered new interface driver usbhid
[ 2.531049] usbhid: v2.6:USB HID core driver
[ 2.633019] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.702014] usb 8-2: new full speed USB device using uhci_hcd and address 2
[ 2.867128] usb 8-2: New USB device found, idVendor=0a5c, idProduct=4500
[ 2.867130] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.867132] usb 8-2: Product: BCM2046B1
[ 2.867133] usb 8-2: Manufacturer: Broadcom
[ 2.867178] usb 8-2: configuration #1 chosen from 1 choice
[ 2.870152] hub 8-2:1.0: USB hub found
[ 2.872132] hub 8-2:1.0: 3 ports detected
[ 2.949017] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.965807] sdhci: Secure Digital Host Controller Interface driver
[ 2.965809] sdhci: Copyright(c) Pierre Ossman
[ 2.966635] sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 21)
[ 2.966654] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.968711] Registered led device: mmc0::
[ 2.969740] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
[ 2.979875] Driver 'sd' needs updating - please use bus_type methods
[ 2.979962] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.979973] sd 0:0:0:0: [sda] Write Protect is off
[ 2.979975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.979990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.980063] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.049273] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.051245] Driver 'sr' needs updating - please use bus_type methods
[ 3.062251] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 3.062263] Uniform CD-ROM driver Revision: 3.20
[ 3.062332] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.067843] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.067864] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.149184] usb 8-2.1: new full speed USB device using uhci_hcd and address 3
[ 3.261201] usb 8-2.1: New USB device found, idVendor=413c, idProduct=8157
[ 3.261204] usb 8-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.261276] usb 8-2.1: configuration #1 chosen from 1 choice
[ 3.268397] input: HID 413c:8157 as /class/input/input3
[ 3.268431] generic-usb 0003:413C:8157.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.2-2.1/input0
[ 3.333216] usb 8-2.2: new full speed USB device using uhci_hcd and address 4
[ 3.447235] usb 8-2.2: New USB device found, idVendor=413c, idProduct=8158
[ 3.447238] usb 8-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.447324] usb 8-2.2: configuration #1 chosen from 1 choice
[ 3.455352] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 3.455502] input: HID 413c:8158 as /class/input/input4
[ 3.455558] generic-usb 0003:413C:8158.0004: input,hidraw3: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.2-2.2/input0
[ 3.456956] reiser4: sda3: found disk format 4.0.0.
[ 12.769431] udevd version 125 started
[ 13.137682] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 13.229303] ACPI: SSDT 7d390999 00281 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 13.229549] ACPI: SSDT 7d390df1 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 13.260362] Linux agpgart interface v0.103
[ 13.269273] Monitor-Mwait will be used to enter C-1 state
[ 13.269836] Monitor-Mwait will be used to enter C-2 state
[ 13.271239] Monitor-Mwait will be used to enter C-3 state
[ 13.271245] Marking TSC unstable due to TSC halts in idle
[ 13.271287] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.271309] processor ACPI_CPU:00: registered as cooling_device0
[ 13.271312] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 13.271664] ACPI: SSDT 7d390c1a 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 13.271905] ACPI: SSDT 7d3913b7 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 13.272354] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 13.272368] processor ACPI_CPU:01: registered as cooling_device1
[ 13.272371] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 13.306884] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 13.307811] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 13.310945] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 13.337185] ACPI: Battery Slot [BAT0] (battery present)
[ 13.337557] ACPI: AC Adapter [AC] (on-line)
[ 13.365639] input: Lid Switch as /class/input/input5
[ 13.367033] ACPI: Lid Switch [LID]
[ 13.367083] input: Power Button as /class/input/input6
[ 13.367114] ACPI: Power Button [PBTN]
[ 13.367149] input: Sleep Button as /class/input/input7
[ 13.367169] ACPI: Sleep Button [SBTN]
[ 13.424199] ACPI: WMI: Mapper loaded
[ 13.446665] input: PC Speaker as /class/input/input8
[ 13.482046] cfg80211: Using static regulatory domain info
[ 13.482048] cfg80211: Regulatory domain: US
[ 13.482049] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.482051] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 13.482053] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 13.482055] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 13.482057] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 13.482059] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 13.482061] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 13.482066] cfg80211: Calling CRDA for country: US
[ 13.645528] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 13.798208] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 13.798229] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.821065] input: PS/2 Mouse as /class/input/input9
[ 13.838072] input: AlpsPS/2 ALPS GlidePoint as /class/input/input10
[ 13.862118] input: HDA Digital PCBeep as /class/input/input11
[ 13.898146] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 13.898148] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 13.898224] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.898283] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 13.898333] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 13.903140] input: HDA Intel Mic at Ext Right Jack as /class/input/input12
[ 13.903200] input: HDA Intel Line Out at Sep Left Jack as /class/input/input13
[ 13.903242] input: HDA Intel HP Out at Ext Right Jack as /class/input/input14
[ 13.920443] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 13.920530] iwlagn 0000:0c:00.0: irq 28 for MSI/MSI-X
[ 14.066962] usb 8-2.3: new full speed USB device using uhci_hcd and address 5
[ 14.170761] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 14.187953] usb 8-2.3: New USB device found, idVendor=413c, idProduct=8156
[ 14.187956] usb 8-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 14.187958] usb 8-2.3: Product: Dell Wireless 370 Bluetooth Mini-card
[ 14.187959] usb 8-2.3: Manufacturer: Dell Computer Corp
[ 14.188040] usb 8-2.3: configuration #1 chosen from 1 choice
[ 14.238570] Bluetooth: Core ver 2.15
[ 14.240029] NET: Registered protocol family 31
[ 14.240031] Bluetooth: HCI device and connection manager initialized
[ 14.240033] Bluetooth: HCI socket layer initialized
[ 14.445816] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 14.445884] usbcore: registered new interface driver btusb
[ 16.246338] fuse init (API version 7.11)
[ 16.332872] logsave[2263]: segfault at 0 ip (null) sp bfa55864 error 4 in logsave[8048000+2000]
[ 16.891286] kjournald starting. Commit interval 5 seconds
[ 16.891478] EXT3 FS on sda7, internal journal
[ 16.891484] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.928834] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 17.244658] kjournald starting. Commit interval 5 seconds
[ 17.244884] EXT3 FS on sda5, internal journal
[ 17.244888] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.285571] reiser4: sda6: found disk format 4.0.0.
[ 24.000309] Clocksource tsc unstable (delta = -270258502 ns)
[ 33.100747] [drm] Initialized drm 1.1.0 20060810
[ 33.131147] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 33.131160] pci 0000:00:02.0: setting latency timer to 64
[ 33.135309] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 33.135318] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 33.135369] pci 0000:00:02.0: irq 29 for MSI/MSI-X
[ 33.198458] acpi device:38: registered as cooling_device2
[ 33.200358] input: Video Bus as /class/input/input15
[ 33.200455] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 33.200592] ACPI Warning (nspredef-0437): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20090320]
[ 33.200763] input: Video Bus as /class/input/input16
[ 33.200824] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 33.200871] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 33.566941] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 33.899370] tg3 0000:09:00.0: PME# disabled
[ 33.899581] tg3 0000:09:00.0: irq 30 for MSI/MSI-X
[ 33.997364] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.188893] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 34.440233] iwlagn 0000:0c:00.0: loaded firmware version 8.24.2.12
[ 34.580679] Registered led device: iwl-phy0::radio
[ 34.583328] Registered led device: iwl-phy0::assoc
[ 34.583390] Registered led device: iwl-phy0::RX
[ 34.583428] Registered led device: iwl-phy0::TX
[ 34.600556] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.765427] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.580645] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 35.580645] tg3: eth0: Flow control is off for TX and off for RX.
[ 35.580645] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 36.498408] set status page addr 0x08da0000lspci
Код: Выделить всё
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100lspci -vv
Код: Выделить всё
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Dell Device 0263
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device 0263
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at efe8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Dell Device 0263
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>uname -r
Код: Выделить всё
2.6.30.9-elive-686glxinfo
Код: Выделить всё
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset 4.1.3002 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.0.4
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_fragment_shader, GL_ARB_imaging, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_shading_language_120, GL_ARB_shadow, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array,
GL_EXT_convolution, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_fog_coord, GL_EXT_histogram, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_ATI_blend_equation_separate, GL_ATI_separate_stencil,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_point_sprite, GL_NV_texture_rectangle, GL_NV_texgen_reflection,
GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SUN_multi_draw_arrays
17 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x2c 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2e 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2f 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x31 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x81 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon
17 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x24 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x25 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x26 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x27 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x28 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x29 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2a 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2b 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x2c 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x2d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2e 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2f 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x30 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x31 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x32 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x81 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Nconеще нашел такой патч, только не знаю надо ли там чтонить заменять на свои параметры
Код: Выделить всё
#!/bin/bash
MTRR=/proc/mtrr
WRONG_WRITEBACK_LINE="base=0x00000000 ( 0MB), size=32768MB: write-back, count=1"
#WRONG_UNCACHABLE_LINE="base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1"
WRONG_UNCACHABLE_LINE="base=0x0e000000 (3584MB), size=512MB: uncachable, count=1"
if [ ! -e "$MTRR" ]; then
echo "ERROR: $MTRR does not exist"
exit 1
fi
if grep -q "$WRONG_WRITEBACK_LINE" "$MTRR" && grep -q "$WRONG_UNCACHABLE_LINE" "$MTRR"; then
# Found the wrong lines, now fix them
WRONG_WRITEBACK_INDEX=$(grep "$WRONG_WRITEBACK_LINE" "$MTRR" | sed 's/^reg\(..\):.*$/\1/')
WRONG_UNCACHABLE_INDEX=$(grep "$WRONG_UNCACHABLE_LINE" "$MTRR" | sed 's/^reg\(..\):.*$/\1/')
if [ -z "$WRONG_WRITEBACK_INDEX" ] || [ -z "$WRONG_UNCACHABLE_INDEX" ] \
|| [ "${#WRONG_WRITEBACK_INDEX}" -gt 2 ] || [ "${#WRONG_UNCACHABLE_INDEX}" -gt 2 ]; then
echo "ERROR: Found wrong lines but could not find MTRR index"
exit 2
fi
# Change wb entry to only cover the first 3GB (0x00000000 - 0xc0000000 (exclusive))
echo "disable=$WRONG_WRITEBACK_INDEX" > $MTRR
echo "base=0x00000000 size=0x80000000 type=write-back" > $MTRR
echo "base=0x80000000 size=0x40000000 type=write-back" > $MTRR
# Change the uncachable entry to exclude the graphics memory (0xd0000000 - 0xe0000000 (excl.))
echo "disable=$WRONG_UNCACHABLE_INDEX" > $MTRR
echo "base=0xc0000000 size=0x10000000 type=uncachable" > $MTRR
echo "base=0xe0000000 size=0x20000000 type=uncachable" > $MTRR
fiзапускаю, ничего не происходит, никакого оутпута
еще тут коекакое описание графики
Код: Выделить всё
http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/у меня в биосе прописано 32мб на графике, поменять это не возможно. если менять через xorg.conf, то при инициализации сбрасывает на 256мб (см. лог Xorg.log).
если у кого будет желание, подскажите что делать. Не хочется мне верить что эта графика не способна на 3д эффекты.
да, кстати, в windows xp, в параметраh графики прописано 1ГБ
.. и например игра типа Neverwinter night 1 играется без проблем на макс. разрешении. С уважением
