postfix:
Код: Выделить всё
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
readme_directory = no
# TLS parameters
smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.
myhostname = mail.zap-info.com
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = mail.zap-info.com, localhost.zap-info.com, localhost
relayhost =
mynetworks = 127.0.0.0/8 10.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf
virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf
virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf,mysql:/etc/postfix/mysql-email2email.cf
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
virtual_transport = dovecot
dovecot_destination_recipient_limit = 1
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_auth_enable = yes
smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination
smtpd_sender_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_rbl_client bl.spamcop.net,reject_rbl_client dnsbl.sorbs.net,reject_rbl_client rhsbl.sorbs.netdovecot
Код: Выделить всё
## Dovecot configuration file
# If you're in a hurry, see http://wiki.dovecot.org/QuickConfiguration
# "dovecot -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting this file when posting to the Dovecot mailing list.
# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace "
# Default values are shown for each setting, it's not required to uncomment
# any of the lines. Exception to this are paths, they're just examples with
# the real defaults being based on configure options. The paths listed here
# are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
# --with-ssldir=/etc/ssl
# Base directory where to store runtime data.
#base_dir = /var/run/dovecot/
# Protocols we want to be serving: imap imaps pop3 pop3s managesieve
# If you only want to use dovecot-auth, you can set this to "none".
#protocols = imap imaps
protocols = imap imaps pop3 pop3s
# IP or host address where to listen in for connections. It's not currently
# possible to specify multiple addresses. "*" listens in all IPv4 interfaces.
# "[::]" listens in all IPv6 interfaces, but may also listen in all IPv4
# interfaces depending on the operating system.
#
# If you want to specify ports for each service, you will need to configure
# these settings inside the protocol imap/pop3/managesieve { ... } section,
# so you can specify different ports for IMAP/POP3/MANAGESIEVE. For example:
# protocol imap {
# listen = *:10143
# ssl_listen = *:10943
# ..
# }
# protocol pop3 {
# listen = *:10100
# ..
# }
# protocol managesieve {
# listen = *:12000
# ..
# }
#listen = *
# Disable LOGIN command and all other plaintext authentications unless
# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
# matches the local IP (ie. you're connecting from the same computer), the
# connection is considered secure and plaintext authentication is allowed.
disable_plaintext_auth = no
# Should all IMAP and POP3 processes be killed when Dovecot master process
# shuts down. Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is eg. because of a security fix). This however
# means that after master process has died, the client processes can't write
# to log files anymore.
#shutdown_clients = yes
##
## Logging
##
# Log file to use for error messages, instead of sending them to syslog.
# /dev/stderr can be used to log into stderr.
#log_path =
# Log file to use for informational and debug messages.
# Default is the same as log_path.
#info_log_path =
# Prefix for each line written to log file. % codes are in strftime(3)
# format.
#log_timestamp = "%b %d %H:%M:%S "
log_timestamp = "%Y-%m-%d %H:%M:%S "
# Syslog facility to use if you're logging to syslog. Usually if you don't
# want to use "mail", you'll use local0..local7. Also other standard
# facilities are supported.
#syslog_facility = mail
##
## SSL settings
##
# IP or host address where to listen in for SSL connections. Defaults
# to above if not specified.
#ssl_listen =
# Disable SSL/TLS support.
#ssl_disable = no
# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
# dropping root privileges, so keep the key file unreadable by anyone but
# root.
#ssl_cert_file = /etc/ssl/certs/dovecot.pem
#ssl_key_file = /etc/ssl/private/dovecot.pem
# If key file is password protected, give the password here. Alternatively
# give it when starting dovecot with -p parameter.
#ssl_key_password =
# File containing trusted SSL certificate authorities. Set this only if you
# intend to use ssl_verify_client_cert=yes. The CAfile should contain the
# CA-certificate(s) followed by the matching CRL(s).
#ssl_ca_file =
# Request client to send a certificate. If you also want to require it, set
# ssl_require_client_cert=yes in auth section.
#ssl_verify_client_cert = no
# How often to regenerate the SSL parameters file. Generation is quite CPU
# intensive operation. The value is in hours, 0 disables regeneration
# entirely.
#ssl_parameters_regenerate = 168
# SSL ciphers to use
#ssl_cipher_list = ALL:!LOW
# Show protocol level SSL errors.
#verbose_ssl = no
##
## Login processes
##
# <doc/wiki/LoginProcess.txt>
# Directory where authentication process places authentication UNIX sockets
# which login needs to be able to connect to. The sockets are created when
# running as root, so you don't have to worry about permissions. Note that
# everything in this directory is deleted when Dovecot is started.
#login_dir = /var/run/dovecot/login
# chroot login process to the login_dir. Only reason not to do this is if you
# wish to run the whole Dovecot without roots. <doc/wiki/Rootless.txt>
#login_chroot = yes
# User to use for the login process. Create a completely new user for this,
# and don't use it anywhere else. The user must also belong to a group where
# only it has access, it's used to control access for authentication process.
# Note that this user is NOT used to access mails. <doc/wiki/UserIds.txt>
#login_user = dovecot
# Set max. process size in megabytes. If you don't use
# login_process_per_connection you might need to grow this.
#login_process_size = 64
# Should each login be processed in it's own process (yes), or should one
# login process be allowed to process multiple connections (no)? Yes is more
# secure, espcially with SSL/TLS enabled. No is faster since there's no need
# to create processes all the time.
#login_process_per_connection = yes
# Number of login processes to keep for listening new connections.
#login_processes_count = 3
# Maximum number of login processes to create. The listening process count
# usually stays at login_processes_count, but when multiple users start logging
# in at the same time more extra processes are created. To prevent fork-bombing
# we check only once in a second if new processes should be created - if all
# of them are used at the time, we double their amount until the limit set by
# this setting is reached.
#login_max_processes_count = 128
# Maximum number of connections allowed per each login process. This setting
# is used only if login_process_per_connection=no. Once the limit is reached,
# the process notifies master so that it can create a new login process.
# You should make sure that the process has at least
# 16 + login_max_connections * 2 available file descriptors.
#login_max_connections = 256
# Greeting message for clients.
#login_greeting = Dovecot ready.
# Space-separated list of elements we want to log. The elements which have
# a non-empty variable value are joined together to form a comma-separated
# string.
#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c
# Login log format. %$ contains login_log_format_elements string, %s contains
# the data we want to log.
#login_log_format = %$: %s
##
## Mailbox locations and namespaces
##
# Location for users' mailboxes. This is the same as the old default_mail_env
# setting. The default is empty, which means that Dovecot tries to find the
# mailboxes automatically. This won't work if the user doesn't have any mail
# yet, so you should explicitly tell Dovecot the full location.
#
# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
# kept. This is called the "root mail directory", and it must be the first
# path given in the mail_location setting.
#
# There are a few special variables you can use, eg.:
#
# %u - username
# %n - user part in user@domain, same as %u if there's no domain
# %d - domain part in user@domain, empty if there's no domain
# %h - home directory
#
# See /usr/share/doc/dovecot-common/wiki/Variables.txt for full list. Some
# examples:
#
# mail_location = maildir:~/Maildir
# mail_location = mbox:~/mail:INBOX=/var/mail/%u
# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
#
# <doc/wiki/MailLocation.txt>
#
mail_location = maildir:/vmail/%d/%n/Maildir
# If you need to set multiple mailbox locations or want to change default
# namespace settings, you can do it by defining namespace sections.
# NOTE: Namespaces currently work ONLY with IMAP! POP3 and LDA currently ignore
# namespaces completely, they use only the mail_location setting.
#
# You can have private, shared and public namespaces. The only difference
# between them is how Dovecot announces them to client via NAMESPACE
# extension. Shared namespaces are meant for user-owned mailboxes which are
# shared to other users, while public namespaces are for more globally
# accessible mailboxes.
#
# REMEMBER: If you add any namespaces, the default namespace must be added
# explicitly, ie. mail_location does nothing unless you have a namespace
# without a location setting. Default namespace is simply done by having a
# namespace with empty prefix.
namespace private {
# Hierarchy separator to use. You should use the same separator for all
# namespaces or some clients get confused. '/' is usually a good one.
# The default however depends on the underlying mail storage format.
separator = .
# Prefix required to access this namespace. This needs to be different for
# all namespaces. For example "Public/".
prefix = .INBOX
# Physical location of the mailbox. This is in same format as
# mail_location, which is also the default for it.
#location =
# There can be only one INBOX, and this setting defines which namespace
# has it.
inbox = yes
# If namespace is hidden, it's not advertised to clients via NAMESPACE
# extension or shown in LIST replies. This is mostly useful when converting
# from another server with different namespaces which you want to depricate
# but still keep working. For example you can create hidden namespaces with
# prefixes "~/mail/", "~%u/mail/" and "mail/".
#hidden = yes
}
# Group to enable temporarily for privileged operations. Currently this is
# used only with INBOX when either its initial creation or dotlocking fails.
# Typically this is set to "mail" to give access to /var/mail.
mail_privileged_group = mail
# Grant access to these supplementary groups for mail processes. Typically
# these are used to set up access to shared mailboxes. Note that it may be
# dangerous to set these if users can create symlinks (e.g. if "mail" group is
# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
#mail_access_groups =
# Allow full filesystem access to clients. There's no access checks other than
# what the operating system does for the active UID/GID. It works with both
# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
# or ~user/.
#mail_full_filesystem_access = no
##
## Mail processes
##
# Enable mail process debugging. This can help you figure out why Dovecot
# isn't finding your mails.
#mail_debug = no
# Log prefix for mail processes.
# See /usr/share/doc/dovecot-common/wiki/Variables.txt for list of possible
# variables you can use.
#mail_log_prefix = "%Us(%u): "
# Max. number of lines a mail process is allowed to log per second before it's
# throttled. 0 means unlimited. Typically there's no need to change this
# unless you're using mail_log plugin, which may log a lot.
#mail_log_max_lines_per_sec = 10
# Don't use mmap() at all. This is required if you store indexes to shared
# filesystems (NFS or clustered filesystem).
#mmap_disable = no
# Don't write() to mmaped files. This is required for some operating systems
# which use separate caches for them, such as OpenBSD.
#mmap_no_write = no
# Rely on O_EXCL to work when creating dotlock files. The default is to use
# hard linking. O_EXCL makes the dotlocking faster, but it doesn't always
# work with NFS.
#dotlock_use_excl = no
# Don't use fsync() or fdatasync() calls. This makes the performance better
# at the cost of potential data loss if the server (or the file server)
# goes down.
#fsync_disable = no
# Locking method for index files. Alternatives are fcntl, flock and dotlock.
# Dotlocking uses some tricks which may create more disk I/O than other locking
# methods. NFS users: flock doesn't work, remember to change mmap_disable.
#lock_method = fcntl
# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
#mail_drop_priv_before_exec = no
# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
#verbose_proctitle = no
# Valid UID range for users, defaults to 500 and above. This is mostly
# to make sure that users can't log in as daemons or other system users.
# Note that denying root logins is hardcoded to dovecot binary and can't
# be done even if first_valid_uid is set to 0.
#first_valid_uid = 500
#last_valid_uid = 0
# Valid GID range for users, defaults to non-root/wheel. Users having
# non-valid GID as primary group ID aren't allowed to log in. If user
# belongs to supplementary groups with non-valid GIDs, those groups are
# not set.
#first_valid_gid = 1
#last_valid_gid = 0
# Maximum number of running mail processes. When this limit is reached,
# new users aren't allowed to log in.
#max_mail_processes = 1024
# Set max. process size in megabytes. Most of the memory goes to mmap()ing
# files, so it shouldn't harm much even if this limit is set pretty high.
#mail_process_size = 256
# Maximum allowed length for mail keyword name. It's only forced when trying
# to create new keywords.
#mail_max_keyword_length = 50
# ':' separated list of directories under which chrooting is allowed for mail
# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
# This setting doesn't affect login_chroot or auth chroot variables.
# WARNING: Never add directories here which local users can modify, that
# may lead to root exploit. Usually this should be done only if you don't
# allow shell access for users. <doc/wiki/Chrooting.txt>
#valid_chroot_dirs =
# Default chroot directory for mail processes. This can be overridden for
# specific users in user database by giving /./ in user's home directory
# (eg. /home/./user chroots into /home). Note that usually there is no real
# need to do chrooting, Dovecot doesn't allow users to access files outside
# their mail directory anyway. <doc/wiki/Chrooting.txt>
#mail_chroot =
##
## Mailbox handling optimizations
##
# Space-separated list of fields to initially save into cache file. Currently
# these fields are allowed:
#
# flags, date.sent, date.received, size.virtual, size.physical
# mime.parts, imap.body, imap.bodystructure
#
# Different IMAP clients work in different ways, so they benefit from
# different cached fields. Some do not benefit from them at all. Caching more
# than necessary generates useless disk I/O, so you don't want to do that
# either.
#
# Dovecot attempts to automatically figure out what client wants and it keeps
# only that. However the first few times a mailbox is opened, Dovecot hasn't
# yet figured out what client needs, so it may not perform optimally. If you
# know what fields the majority of your clients need, it may be useful to set
# these fields by hand. If client doesn't actually use them, Dovecot will
# eventually drop them.
#
# Usually you should just leave this field alone. The potential benefits are
# typically unnoticeable.
#mail_cache_fields =
# Space-separated list of fields that Dovecot should never save to cache file.
# Useful if you want to save disk space at the cost of more I/O when the fields
# needed.
#mail_never_cache_fields =
# The minimum number of mails in a mailbox before updates are done to cache
# file. This allows optimizing Dovecot's behavior to do less disk writes at
# the cost of more disk reads.
#mail_cache_min_mail_count = 0
# When IDLE command is running, mailbox is checked once in a while to see if
# there are any new mails or other changes. This setting defines the minimum
# time in seconds to wait between those checks. Dovecot can also use dnotify,
# inotify and kqueue to find out immediately when changes occur.
#mailbox_idle_check_interval = 30
# Save mails with CR+LF instead of plain LF. This makes sending those mails
# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
# But it also creates a bit more disk I/O which may just make it slower.
# Also note that if other software reads the mboxes/maildirs, they may handle
# the extra CRs wrong and cause problems.
#mail_save_crlf = no
##
## Maildir-specific settings
##
# By default LIST command returns all entries in maildir beginning with a dot.
# Enabling this option makes Dovecot return only entries which are directories.
# This is done by stat()ing each entry, so it causes more disk I/O.
# (For systems setting struct dirent->d_type, this check is free and it's
# done always regardless of this setting)
#maildir_stat_dirs = no
# When copying a message, do it with hard links whenever possible. This makes
# the performance much better, and it's unlikely to have any side effects.
#maildir_copy_with_hardlinks = no
# When copying a message, try to preserve the base filename. Only if the
# destination mailbox already contains the same name (ie. the mail is being
# copied there twice), a new name is given. The destination filename check is
# done only by looking at dovecot-uidlist file, so if something outside
# Dovecot does similar filename preserving copies, you may run into problems.
# NOTE: This setting requires maildir_copy_with_hardlinks = yes to work.
#maildir_copy_preserve_filename = no
##
## mbox-specific settings
##
# Which locking methods to use for locking mbox. There are four available:
# dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
# solution. If you want to use /var/mail/ like directory, the users
# will need write access to that directory.
# fcntl : Use this if possible. Works with NFS too if lockd is used.
# flock : May not exist in all systems. Doesn't work with NFS.
# lockf : May not exist in all systems. Doesn't work with NFS.
#
# You can use multiple locking methods; if you do the order they're declared
# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
# locking methods as well. Some operating systems don't allow using some of
# them simultaneously.
#mbox_read_locks = fcntl
#mbox_write_locks = dotlock fcntl
# Maximum time in seconds to wait for lock (all of them) before aborting.
#mbox_lock_timeout = 300
# If dotlock exists but the mailbox isn't modified in any way, override the
# lock file after this many seconds.
#mbox_dotlock_change_timeout = 120
# When mbox changes unexpectedly we have to fully read it to find out what
# changed. If the mbox is large this can take a long time. Since the change
# is usually just a newly appended mail, it'd be faster to simply read the
# new mails. If this setting is enabled, Dovecot does this but still safely
# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
# how it's expected to be. The only real downside to this setting is that if
# some other MUA changes message flags, Dovecot doesn't notice it immediately.
# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK
# commands.
#mbox_dirty_syncs = yes
# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
#mbox_very_dirty_syncs = no
# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
# commands and when closing the mailbox). This is especially useful for POP3
# where clients often delete all mails. The downside is that our changes
# aren't immediately visible to other MUAs.
#mbox_lazy_writes = yes
# If mbox size is smaller than this (in kilobytes), don't write index files.
# If an index file already exists it's still read, just not updated.
#mbox_min_index_size = 0
##
## dbox-specific settings
##
# Maximum dbox file size in kilobytes until it's rotated.
#dbox_rotate_size = 2048
# Minimum dbox file size in kilobytes before it's rotated
# (overrides dbox_rotate_days)
#dbox_rotate_min_size = 16
# Maximum dbox file age in days until it's rotated. Day always begins from
# midnight, so 1 = today, 2 = yesterday, etc. 0 = check disabled.
#dbox_rotate_days = 0
##
## IMAP specific settings
##
protocol imap {
# Login executable location.
#login_executable = /usr/lib/dovecot/imap-login
# IMAP executable location. Changing this allows you to execute other
# binaries before the imap process is executed.
#
# This would write rawlogs into ~/dovecot.rawlog/ directory:
# mail_executable = /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap
#
# This would attach gdb into the imap process and write backtraces into
# /tmp/gdbhelper.* files:
# mail_executable = /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap
#
#mail_executable = /usr/lib/dovecot/imap
# Maximum IMAP command line length in bytes. Some clients generate very long
# command lines with huge mailboxes, so you may need to raise this if you get
# "Too long argument" or "IMAP command line too large" errors often.
#imap_max_line_length = 65536
# Support for dynamically loadable plugins. mail_plugins is a space separated
# list of plugins to load.
#mail_plugins =
#mail_plugin_dir = /usr/lib/dovecot/modules/imap
# Send IMAP capabilities in greeting message. This makes it unnecessary for
# clients to request it with CAPABILITY command, so it saves one round-trip.
# Many clients however don't understand it and ask the CAPABILITY anyway.
#login_greeting_capability = no
# Override the IMAP CAPABILITY response.
#imap_capability =
# Workarounds for various client bugs:
# delay-newmail:
# Send EXISTS/RECENT new mail notifications only when replying to NOOP
# and CHECK commands. Some clients ignore them otherwise, for example OSX
# Mail (<v2.1). Outlook Express breaks more badly though, without this it
# may show user "Message no longer in server" errors. Note that OE6 still
# breaks even with this workaround if synchronization is set to
# "Headers Only".
# outlook-idle:
# Outlook and Outlook Express never abort IDLE command, so if no mail
# arrives in half a hour, Dovecot closes the connection. This is still
# fine, except Outlook doesn't connect back so you don't see if new mail
# arrives.
# netscape-eoh:
# Netscape 4.x breaks if message headers don't end with the empty "end of
# headers" line. Normally all messages have this, but setting this
# workaround makes sure that Netscape never breaks by adding the line if
# it doesn't exist. This is done only for FETCH BODY[HEADER.FIELDS..]
# commands. Note that RFC says this shouldn't be done.
# tb-extra-mailbox-sep:
# With mbox storage a mailbox can contain either mails or submailboxes,
# but not both. Thunderbird separates these two by forcing server to
# accept '/' suffix in mailbox names in subscriptions list.
# The list is space-separated.
#imap_client_workarounds = outlook-idle
}
##
## POP3 specific settings
##
protocol pop3 {
# Login executable location.
#login_executable = /usr/lib/dovecot/pop3-login
# POP3 executable location. See IMAP's mail_executable above for examples
# how this could be changed.
#mail_executable = /usr/lib/dovecot/pop3
# Don't try to set mails non-recent or seen with POP3 sessions. This is
# mostly intended to reduce disk I/O. With maildir it doesn't move files
# from new/ to cur/, with mbox it doesn't write Status-header.
#pop3_no_flag_updates = no
# Support LAST command which exists in old POP3 specs, but has been removed
# from new ones. Some clients still wish to use this though. Enabling this
# makes RSET command clear all \Seen flags from messages.
#pop3_enable_last = no
# If mail has X-UIDL header, use it as the mail's UIDL.
#pop3_reuse_xuidl = no
# Keep the mailbox locked for the entire POP3 session.
#pop3_lock_session = no
# POP3 UIDL (unique mail identifier) format to use. You can use following
# variables:
#
# %v - Mailbox's IMAP UIDVALIDITY
# %u - Mail's IMAP UID
# %m - MD5 sum of the mailbox headers in hex (mbox only)
# %f - filename (maildir only)
#
# If you want UIDL compatibility with other POP3 servers, use:
# UW's ipop3d : %08Xv%08Xu
# Courier version 0 : %f
# Courier version 1 : %u
# Courier version 2 : %v-%u
# Cyrus (<= 2.1.3) : %u
# Cyrus (>= 2.1.4) : %v.%u
# Older Dovecots : %v.%u
# tpop3d : %Mf
#
# Note that Outlook 2003 seems to have problems with %v.%u format which was
# Dovecot's default, so if you're building a new server it would be a good
# idea to change this. %08Xu%08Xv should be pretty fail-safe.
#
# NOTE: Nowadays this is required to be set explicitly, since the old
# default was bad but it couldn't be changed without breaking existing
# installations. %08Xu%08Xv will be the new default, so use it for new
# installations.
#
pop3_uidl_format = %08Xu%08Xv
# POP3 logout format string:
# %t - number of TOP commands
# %p - number of bytes sent to client as a result of TOP command
# %r - number of RETR commands
# %b - number of bytes sent to client as a result of RETR command
# %d - number of deleted messages
# %m - number of messages (before deletion)
# %s - mailbox size in bytes (before deletion)
#pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s
# Support for dynamically loadable plugins. mail_plugins is a space separated
# list of plugins to load.
#mail_plugins =
#mail_plugin_dir = /usr/lib/dovecot/modules/pop3
# Workarounds for various client bugs:
# outlook-no-nuls:
# Outlook and Outlook Express hang if mails contain NUL characters.
# This setting replaces them with 0x80 character.
# oe-ns-eoh:
# Outlook Express and Netscape Mail breaks if end of headers-line is
# missing. This option simply sends it if it's missing.
# The list is space-separated.
#pop3_client_workarounds =
}
##
## MANAGESIEVE specific settings
##
#protocol managesieve {
# Login executable location.
#login_executable = /usr/libexec/dovecot/managesieve-login
# MANAGESIEVE executable location. See IMAP's mail_executable above for
# examples how this could be changed.
#mail_executable = /usr/libexec/dovecot/managesieve
# Maximum MANAGESIEVE command line length in bytes. This setting is
# directly borrowed from IMAP. But, since long command lines are very
# unlikely with MANAGESIEVE, changing this will not be very useful.
#managesieve_max_line_length = 65536
# Specifies the location of the symlink pointing to the active script in
# the sieve storage directory. This must match the SIEVE setting used by
# deliver (refer to http://wiki.dovecot.org/LDA/Sieve#location for more
# info). Variable substitution with % is recognized.
#sieve=~/.dovecot.sieve
# This specifies the path to the directory where the uploaded scripts must
# be stored. In terms of '%' variable substitution it is identical to
# dovecot's mail_location setting used by the mail protocol daemons.
#sieve_storage=~/sieve
# If, for some inobvious reason, the sieve_storage remains unset, the
# managesieve daemon uses the specification of the mail_location to find out
# where to store the sieve files (see explaination in README.managesieve).
# The example below, when uncommented, overrides any global mail_location
# specification and stores all the scripts in '~/mail/sieve' if sieve_storage
# is unset. However, you should always use the sieve_storage setting.
# mail_location = mbox:~/mail
# To fool managesieve clients that are focused on timesieved you can
# specify the IMPLEMENTATION capability that the dovecot reports to clients
# (default: dovecot).
#managesieve_implementation_string = Cyrus timsieved v2.2.13
#}
##
## LDA specific settings
##
protocol lda {
# Address to use when sending rejection mails.
postmaster_address = postmaster@zap-info.com
# Hostname to use in various parts of sent mails, eg. in Message-Id.
# Default is the system's real hostname.
#hostname =
# Support for dynamically loadable plugins. mail_plugins is a space separated
# list of plugins to load.
#mail_plugins =
#mail_plugin_dir = /usr/lib/dovecot/modules/lda
# Binary to use for sending mails.
#sendmail_path = /usr/lib/sendmail
# UNIX socket path to master authentication server to find users.
auth_socket_path = /var/run/dovecot/auth-master
# Enabling Sieve plugin for server-side mail filtering
mail_plugins = cmusieve
global_script_path = /vmail/globalsieverc
log_path = /vmail/dovecot-deliver.log
}
##
## Authentication processes
##
# Executable location
#auth_executable = /usr/lib/dovecot/dovecot-auth
# Set max. process size in megabytes.
#auth_process_size = 256
# Authentication cache size in kilobytes. 0 means it's disabled.
# Note that bsdauth, PAM and vpopmail require cache_key to be set for caching
# to be used.
#auth_cache_size = 0
# Time to live in seconds for cached data. After this many seconds the cached
# record is no longer used, *except* if the main database lookup returns
# internal failure. We also try to handle password changes automatically: If
# user's previous authentication was successful, but this one wasn't, the
# cache isn't used. For now this works only with plaintext authentication.
#auth_cache_ttl = 3600
# Space separated list of realms for SASL authentication mechanisms that need
# them. You can leave it empty if you don't want to support multiple realms.
# Many clients simply use the first one listed here, so keep the default realm
# first.
#auth_realms =
# Default realm/domain to use if none was specified. This is used for both
# SASL realms and appending @domain to username in plaintext logins.
#auth_default_realm =
# List of allowed characters in username. If the user-given username contains
# a character not listed in here, the login automatically fails. This is just
# an extra check to make sure user can't exploit any potential quote escaping
# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
# set this value to empty.
#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
# Username character translations before it's looked up from databases. The
# value contains series of from -> to characters. For example "#@/@" means
# that '#' and '/' characters are translated to '@'.
#auth_username_translation =
# Username formatting before it's looked up from databases. You can use
# the standard variables here, eg. %Lu would lowercase the username, %n would
# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
# "-AT-". This translation is done after auth_username_translation changes.
#auth_username_format =
# If you want to allow master users to log in by specifying the master
# username within the normal username string (ie. not using SASL mechanism's
# support for it), you can specify the separator character here. The format
# is then <username><separator><master username>. UW-IMAP uses "*" as the
# separator, so that could be a good choice.
#auth_master_user_separator =
# Username to use for users logging in with ANONYMOUS SASL mechanism
#auth_anonymous_username = anonymous
# More verbose logging. Useful for figuring out why authentication isn't
# working.
#auth_verbose = no
# Even more verbose logging for debugging purposes. Shows for example SQL
# queries.
#auth_debug = no
# In case of password mismatches, log the passwords and used scheme so the
# problem can be debugged. Requires auth_debug=yes to be set.
#auth_debug_passwords = no
# Maximum number of dovecot-auth worker processes. They're used to execute
# blocking passdb and userdb queries (eg. MySQL and PAM). They're
# automatically created and destroyed as needed.
#auth_worker_max_count = 30
# Host name to use in GSSAPI principal names. The default is to use the
# name returned by gethostname().
#auth_gssapi_hostname =
# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
# default (usually /etc/krb5.keytab) if not specified.
#auth_krb5_keytab =
auth default {
# Space separated list of wanted authentication mechanisms:
# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi
# NOTE: See also disable_plaintext_auth setting.
mechanisms = plain login
#
# Password database is used to verify user's password (and nothing more).
# You can have multiple passdbs and userdbs. This is useful if you want to
# allow both system users (/etc/passwd) and virtual users to login without
# duplicating the system users into virtual database.
#
# <doc/wiki/PasswordDatabase.txt>
#
# By adding master=yes setting inside a passdb you make the passdb a list
# of "master users", who can log in as anyone else. Unless you're using PAM,
# you probably still want the destination user to be looked up from passdb
# that it really exists. This can be done by adding pass=yes setting to the
# master passdb. <doc/wiki/Authentication.MasterUsers.txt>
# Users can be temporarily disabled by adding a passdb with deny=yes.
# If the user is found from that database, authentication will fail.
# The deny passdb should always be specified before others, so it gets
# checked first. Here's an example:
#passdb passwd-file {
# File contains a list of usernames, one per line
#args = /etc/dovecot.deny
#deny = yes
#}
# PAM authentication. Preferred nowadays by most systems.
# Note that PAM can only be used to verify if user's password is correct,
# so it can't be used as userdb. If you don't want to use a separate user
# database (passwd usually), you can use static userdb.
# REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM
# authentication to actually work. <doc/wiki/PasswordDatabase.PAM.txt>
#passdb pam {
# [blocking=yes] [session=yes] [setcred=yes]
# [cache_key=<key>] [<service name>]
#
# By default a new process is forked from dovecot-auth for each PAM lookup.
# Setting blocking=yes uses the alternative way: dovecot-auth worker
# processes do the PAM lookups.
#
# session=yes makes Dovecot open and immediately close PAM session. Some
# PAM plugins need this to work, such as pam_mkhomedir.
#
# setcred=yes makes Dovecot establish PAM credentials if some PAM plugins
# need that. They aren't ever deleted though, so this isn't enabled by
# default.
#
# cache_key can be used to enable authentication caching for PAM
# (auth_cache_size also needs to be set). It isn't enabled by default
# because PAM modules can do all kinds of checks besides checking password,
# such as checking IP address. Dovecot can't know about these checks
# without some help. cache_key is simply a list of variables (see
# /usr/share/doc/dovecot-common/wiki/Variables.txt) which must match for
# the cached data to be used. Here are some examples:
# %u - Username must match. Probably sufficient for most uses.
# %u%r - Username and remote IP address must match.
# %u%s - Username and service (ie. IMAP, POP3) must match.
#
# If service name is "*", it means the authenticating service name
# is used, eg. pop3 or imap (/etc/pam.d/pop3, /etc/pam.d/imap).
#
# Some examples:
# args = session=yes *
# args = cache_key=%u dovecot
#args = dovecot
#}
# System users (NSS, /etc/passwd, or similiar)
# In many systems nowadays this uses Name Service Switch, which is
# configured in /etc/nsswitch.conf. <doc/wiki/AuthDatabase.Passwd.txt>
#passdb passwd {
# [blocking=yes] - See userdb passwd for explanation
#args =
#}
# Shadow passwords for system users (NSS, /etc/shadow or similiar).
# Deprecated by PAM nowadays.
# <doc/wiki/PasswordDatabase.Shadow.txt>
#passdb shadow {
# [blocking=yes] - See userdb passwd for explanation
#args =
#}
# PAM-like authentication for OpenBSD.
# <doc/wiki/PasswordDatabase.BSDAuth.txt>
#passdb bsdauth {
# [cache_key=<key>] - See cache_key in PAM for explanation.
#args =
#}
# passwd-like file with specified location
# <doc/wiki/AuthDatabase.PasswdFile.txt>
#passdb passwd-file {
# Path for passwd-file
#args =
#}
# checkpassword executable authentication
# NOTE: You will probably want to use "userdb prefetch" with this.
# <doc/wiki/PasswordDatabase.CheckPassword.txt>
#passdb checkpassword {
# Path for checkpassword binary
#args =
#}
# SQL database <doc/wiki/AuthDatabase.SQL.txt>
passdb sql {
# Path for SQL configuration file
args = /etc/dovecot/dovecot-sql.conf
}
# LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
#passdb ldap {
# Path for LDAP configuration file
#args = /etc/dovecot/dovecot-ldap.conf
#}
# vpopmail authentication <doc/wiki/AuthDatabase.VPopMail.txt>
#passdb vpopmail {
# [cache_key=<key>] - See cache_key in PAM for explanation.
#args =
#}
#
# User database specifies where mails are located and what user/group IDs
# own them. For single-UID configuration use "static".
#
# <doc/wiki/UserDatabase.txt>
#
# System users (NSS, /etc/passwd, or similiar). In many systems nowadays this
# uses Name Service Switch, which is configured in /etc/nsswitch.conf.
# <doc/wiki/AuthDatabase.Passwd.txt>
userdb passwd {
# [blocking=yes] - By default the lookups are done in the main dovecot-auth
# process. This setting causes the lookups to be done in auth worker
# proceses. Useful with remote NSS lookups that may block.
# NOTE: Be sure to use this setting with nss_ldap or users might get
# logged in as each others!
#args =
}
# passwd-like file with specified location
# <doc/wiki/AuthDatabase.PasswdFile.txt>
#userdb passwd-file {
# Path for passwd-file
#args =
#}
# static settings generated from template <doc/wiki/UserDatabase.Static.txt>
userdb static {
# Template for the fields. Can return anything a userdb could normally
# return. For example:
#
# args = uid=500 gid=500 home=/var/mail/%u
#
# If you use deliver, it needs to look up users only from the userdb. This
# of course doesn't work with static because there is no list of users.
# Normally static userdb handles this by doing a passdb lookup. This works
# with most passdbs, with PAM being the most notable exception. If you do
# the user verification another way, you can add allow_all_users=yes to
# the args in which case the passdb lookup is skipped.
#
args = uid=5000 gid=5000 home=/vmail/%d/%n allow_all_users=yes
}
# SQL database <doc/wiki/AuthDatabase.SQL.txt>
#userdb sql {
# Path for SQL configuration file
#args = /etc/dovecot/dovecot-sql.conf
#}
# LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
#userdb ldap {
# Path for LDAP configuration file
#args = /etc/dovecot/dovecot-ldap.conf
#}
# vpopmail <doc/wiki/AuthDatabase.VPopMail.txt>
#userdb vpopmail {
#}
# "prefetch" user database means that the passdb already provided the
# needed information and there's no need to do a separate userdb lookup.
# This can be made to work with SQL and LDAP databases, see their example
# configuration files for more information how to do it.
# <doc/wiki/UserDatabase.Prefetch.txt>
#userdb prefetch {
#}
# User to use for the process. This user needs access to only user and
# password databases, nothing else. Only shadow and pam authentication
# requires roots, so use something else if possible. Note that passwd
# authentication with BSDs internally accesses shadow files, which also
# requires roots. Note that this user is NOT used to access mails.
# That user is specified by userdb above.
user = root
# Directory where to chroot the process. Most authentication backends don't
# work if this is set, and there's no point chrooting if auth_user is root.
# Note that valid_chroot_dirs isn't needed to use this setting.
#chroot =
# Number of authentication processes to create
#count = 1
# Require a valid SSL client certificate or the authentication fails.
#ssl_require_client_cert = no
# Take the username from client's SSL certificate, using
# X509_NAME_get_text_by_NID() which returns the subject's DN's
# CommonName.
#ssl_username_from_cert = no
# It's possible to export the authentication interface to other programs:
socket listen {
master {
# Master socket provides access to userdb information. It's typically
# used to give Dovecot's local delivery agent access to userdb so it
# can find mailbox locations.
path = /var/run/dovecot/auth-master
mode = 0600
# Default user/group is the one who started dovecot-auth (root)
user = vmail
#group =
}
client {
# The client socket is generally safe to export to everyone. Typical use
# is to export it to your SMTP server so it can do SMTP AUTH lookups
# using it.
path = /var/spool/postfix/private/auth
mode = 0660
user = postfix
group = postfix
}
}
## dovecot-lda specific settings
##
# socket listen {
# master {
# path = /var/run/dovecot/auth-master
# mode = 0600
# user = mail # User running Dovecot LDA
# #group = mail # Or alternatively mode 0660 + LDA user in this group
# }
# }
}
# If you wish to use another authentication server than dovecot-auth, you can
# use connect sockets. They are assumed to be already running, Dovecot's master
# process only tries to connect to them. They don't need any other settings
# than the path for the master socket, as the configuration is done elsewhere.
# Note that the client sockets must exist in the login_dir.
#auth external {
# socket connect {
# master {
# path = /var/run/dovecot/auth-master
# }
# }
#}
##
## Dictionary server settings
##
# Dictionary can be used by some plugins to store key=value lists.
# Currently this is only used by dict quota backend. The dictionary can be
# used either directly or though a dictionary server. The following dict block
# maps dictionary names to URIs when the server is used. These can then be
# referenced using URIs in format "proxy:<name>".
dict {
#quota = mysql:/etc/dovecot-dict-quota.conf
}
##
## Plugin settings
##
plugin {
# Here you can give some extra environment variables to mail processes.
# This is mostly meant for passing parameters to plugins. %variable
# expansion is done for all values.
# Quota plugin. Multiple backends are supported:
# dirsize: Find and sum all the files found from mail directory.
# Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
# dict: Keep quota stored in dictionary (eg. SQL)
# maildir: Maildir++ quota
# fs: Read-only support for filesystem quota
#quota = maildir
# ACL plugin. vfile backend reads ACLs from "dovecot-acl" file from maildir
# directory. You can also optionally give a global ACL directory path where
# ACLs are applied to all users' mailboxes. The global ACL directory contains
# one file for each mailbox, eg. INBOX or sub.mailbox.
#acl = vfile:/etc/dovecot-acls
# Convert plugin. If set, specifies the source storage path which is
# converted to destination storage (mail_location) when the user logs in.
# The existing mail directory is renamed to <dir>-converted.
#convert_mail = mbox:%h/mail
# Skip mailboxes which we can't open successfully instead of aborting.
#convert_skip_broken_mailboxes = no
# Trash plugin. When saving a message would make user go over quota, this
# plugin automatically deletes the oldest mails from configured mailboxes
# until the message can be saved within quota limits. The configuration file
# is a text file where each line is in format: <priority> <mailbox name>
# Mails are first deleted in lowest -> highest priority number order
#trash = /etc/dovecot-trash.conf
# Lazy expunge plugin. Currently works only with maildirs. When a user
# expunges mails, the mails are moved to a mailbox in another namespace
# (1st). When a mailbox is deleted, the mailbox is moved to another namespace
# (2nd) as well. Also if the deleted mailbox had any expunged messages,
# they're moved to a 3rd namespace. The mails won't be counted in quota,
# and they're not deleted automatically (use a cronjob or something).
#lazy_expunge = .EXPUNGED/ .DELETED/ .DELETED/.EXPUNGED/
}Сам roundcube
main.inc.php
Код: Выделить всё
<?php
/*
+-----------------------------------------------------------------------+
| Main configuration file |
| |
| This file is part of the RoundCube Webmail client |
| Copyright (C) 2005-2009, RoundCube Dev. - Switzerland |
| Licensed under the GNU GPL |
| |
+-----------------------------------------------------------------------+
*/
$rcmail_config = array();
// system error reporting: 1 = log; 2 = report (not implemented yet), 4 = show, 8 = trace
$rcmail_config['debug_level'] = 1;
// log driver: 'syslog' or 'file'.
$rcmail_config['log_driver'] = 'file';
// date format for log entries
// (read http://php.net/manual/en/function.date.php for all format characters)
$rcmail_config['log_date_format'] = 'd-M-Y H:i:s O';
// Syslog ident string to use, if using the 'syslog' log driver.
$rcmail_config['syslog_id'] = 'roundcube';
// Syslog facility to use, if using the 'syslog' log driver.
// For possible values see installer or http://php.net/manual/en/function.openlog.php
$rcmail_config['syslog_facility'] = LOG_USER;
// use this folder to store log files (must be writeable for apache user)
// This is used by the 'file' log driver.
$rcmail_config['log_dir'] = 'logs/';
// use this folder to store temp files (must be writeable for apache user)
$rcmail_config['temp_dir'] = 'temp/';
// List of active plugins (in plugins/ directory)
$rcmail_config['plugins'] = array();
// enable caching of messages and mailbox data in the local database.
// this is recommended if the IMAP server does not run on the same machine
$rcmail_config['enable_caching'] = FALSE;
// lifetime of message cache
// possible units: s, m, h, d, w
$rcmail_config['message_cache_lifetime'] = '10d';
// enforce connections over https
// with this option enabled, all non-secure connections will be redirected.
// set the port for the ssl connection as value of this option if it differs from the default 443
$rcmail_config['force_https'] = FALSE;
// automatically create a new RoundCube user when log-in the first time.
// a new user will be created once the IMAP login succeeds.
// set to false if only registered users can use this service
$rcmail_config['auto_create_user'] = TRUE;
// the mail host chosen to perform the log-in
// leave blank to show a textbox at login, give a list of hosts
// to display a pulldown menu or set one host as string.
// To use SSL/TLS connection, enter hostname with prefix ssl:// or tls://
$rcmail_config['default_host'] = 'mail.zap-info.com';
// TCP port used for IMAP connections
$rcmail_config['default_port'] = 143;
// IMAP auth type. Can be "auth" (CRAM-MD5), "plain" (PLAIN) or "check" to auto detect.
// Optional, defaults to "check"
$rcmail_config['imap_auth_type'] = null;
// If you know your imap's root directory and its folder delimiter,
// you can specify them here. Otherwise they will be determined automatically.
$rcmail_config['imap_root'] = null;
$rcmail_config['imap_delimiter'] = null;
// Automatically add this domain to user names for login
// Only for IMAP servers that require full e-mail addresses for login
// Specify an array with 'host' => 'domain' values to support multiple hosts
$rcmail_config['username_domain'] = 'zap-info.com';
// This domain will be used to form e-mail addresses of new users
// Specify an array with 'host' => 'domain' values to support multiple hosts
$rcmail_config['mail_domain'] = '';
// Path to a virtuser table file to resolve user names and e-mail addresses
$rcmail_config['virtuser_file'] = '';
// Query to resolve user names and e-mail addresses from the database
// %u will be replaced with the current username for login.
// The query should select the user's e-mail address as first column
// and optional identity name as second column
$rcmail_config['virtuser_query'] = '';
// use this host for sending mails.
// to use SSL connection, set ssl://smtp.host.com
// if left blank, the PHP mail() function is used
// Use %h variable as replacement for user's IMAP hostname
$rcmail_config['smtp_server'] = 'mail.zap-info.com';
// SMTP port (default is 25; 465 for SSL)
$rcmail_config['smtp_port'] = 25;
// SMTP username (if required) if you use %u as the username RoundCube
// will use the current username for login
$rcmail_config['smtp_user'] = '';
// SMTP password (if required) if you use %p as the password RoundCube
// will use the current user's password for login
$rcmail_config['smtp_pass'] = '';
// SMTP AUTH type (DIGEST-MD5, CRAM-MD5, LOGIN, PLAIN or empty to use
// best server supported one)
$rcmail_config['smtp_auth_type'] = '';
// SMTP HELO host
// Hostname to give to the remote server for SMTP 'HELO' or 'EHLO' messages
// Leave this blank and you will get the server variable 'server_name' or
// localhost if that isn't defined.
$rcmail_config['smtp_helo_host'] = '';
// Log sent messages
$rcmail_config['smtp_log'] = TRUE;
// Log SQL queries to <log_dir>/sql or to syslog
$rcmail_config['sql_debug'] = false;
// Log IMAP conversation to <log_dir>/imap or to syslog
$rcmail_config['imap_debug'] = false;
// Log LDAP conversation to <log_dir>/ldap or to syslog
$rcmail_config['ldap_debug'] = false;
// Log SMTP conversation to <log_dir>/smtp or to syslog
$rcmail_config['smtp_debug'] = false;
// How many seconds must pass between emails sent by a user
$rcmail_config['sendmail_delay'] = 0;
// These cols are shown in the message list. Available cols are:
// subject, from, to, cc, replyto, date, size, flag, attachment
$rcmail_config['list_cols'] = array('subject', 'from', 'date', 'size', 'flag', 'attachment');
// Includes should be interpreted as PHP files
$rcmail_config['skin_include_php'] = FALSE;
// Session lifetime in minutes
// must be greater than 'keep_alive'/60
$rcmail_config['session_lifetime'] = 10;
// check client IP in session athorization
$rcmail_config['ip_check'] = false;
// Use an additional frequently changing cookie to athenticate user sessions.
// There have been problems reported with this feature.
$rcmail_config['double_auth'] = false;
// this key is used to encrypt the users imap password which is stored
// in the session record (and the client cookie if remember password is enabled).
// please provide a string of exactly 24 chars.
$rcmail_config['des_key'] = 'qw=F%TAEpqvwXC+awBP!3Ej4';
// the default locale setting (leave empty for auto-detection)
// RFC1766 formatted language name like en_US, de_DE, de_CH, fr_FR, pt_BR
$rcmail_config['language'] = null;
// use this format for short date display (date or strftime format)
$rcmail_config['date_short'] = 'D H:i';
// use this format for detailed date/time formatting (date or strftime format)
$rcmail_config['date_long'] = 'd.m.Y H:i';
// use this format for today's date display (date or strftime format)
$rcmail_config['date_today'] = 'H:i';
// add this user-agent to message headers when sending
$rcmail_config['useragent'] = 'RoundCube Webmail/'.RCMAIL_VERSION;
// use this name to compose page titles
$rcmail_config['product_name'] = 'RoundCube Webmail';
// store draft message is this mailbox
// leave blank if draft messages should not be stored
$rcmail_config['drafts_mbox'] = 'Drafts';
// store spam messages in this mailbox
$rcmail_config['junk_mbox'] = 'Junk';
// store sent message is this mailbox
// leave blank if sent messages should not be stored
$rcmail_config['sent_mbox'] = 'Sent';
// move messages to this folder when deleting them
// leave blank if they should be deleted directly
$rcmail_config['trash_mbox'] = 'Trash';
// display these folders separately in the mailbox list.
// these folders will also be displayed with localized names
$rcmail_config['default_imap_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash');
// automatically create the above listed default folders on login
$rcmail_config['create_default_folders'] = TRUE;
// protect the default folders from renames, deletes, and subscription changes
$rcmail_config['protect_default_folders'] = TRUE;
// if in your system 0 quota means no limit set this option to TRUE
$rcmail_config['quota_zero_as_unlimited'] = FALSE;
// Behavior if a received message requests a message delivery notification (read receipt)
// 0 = ask the user, 1 = send automatically, 2 = ignore (never send or ask)
$rcmail_config['mdn_requests'] = 0;
// Use this charset as fallback for message decoding
$rcmail_config['default_charset'] = 'ISO-8859-1';
// Make use of the built-in spell checker. It is based on GoogieSpell.
// Since Google only accepts connections over https your PHP installatation
// requires to be compiled with Open SSL support
$rcmail_config['enable_spellcheck'] = TRUE;
// Set the spell checking engine. 'googie' is the default. 'pspell' is also available,
// but requires the Pspell extensions. When using Nox Spell Server, also set 'googie' here.
$rcmail_config['spellcheck_engine'] = 'googie';
// For a locally installed Nox Spell Server, please specify the URI to call it.
// Get Nox Spell Server from http://orangoo.com/labs/?page_id=72
// Leave empty to use the Google spell checking service, what means
// that the message content will be sent to Google in order to check spelling
$rcmail_config['spellcheck_uri'] = '';
// These languages can be selected for spell checking.
// Configure as a PHP style hash array: array('en'=>'English', 'de'=>'Deutsch');
// Leave empty for default set of available language.
$rcmail_config['spellcheck_languages'] = NULL;
// path to a text file which will be added to each sent message
// paths are relative to the RoundCube root folder
$rcmail_config['generic_message_footer'] = '';
// add a received header to outgoing mails containing the creators IP and hostname
$rcmail_config['http_received_header'] = false;
// Whether or not to encrypt the IP address and the host name
// these could, in some circles, be considered as sensitive information;
// however, for the administrator, these could be invaluable help
// when tracking down issues.
$rcmail_config['http_received_header_encrypt'] = false;
// this string is used as a delimiter for message headers when sending
// leave empty for auto-detection
$rcmail_config['mail_header_delimiter'] = NULL;
// session domain: .example.org
$rcmail_config['session_domain'] = '';
// This indicates which type of address book to use. Possible choises:
// 'sql' (default) and 'ldap'.
// If set to 'ldap' then it will look at using the first writable LDAP
// address book as the primary address book and it will not display the
// SQL address book in the 'Address Book' view.
$rcmail_config['address_book_type'] = 'sql';
// In order to enable public ldap search, configure an array like the Verisign
// example further below. if you would like to test, simply uncomment the example.
$rcmail_config['ldap_public'] = array();
//
// If you are going to use LDAP for individual address books, you will need to
// set 'user_specific' to true and use the variables to generate the appropriate DNs to access it.
//
// The recommended directory structure for LDAP is to store all the address book entries
// under the users main entry, e.g.:
//
// o=root
// ou=people
// uid=user@domain
// mail=contact@contactdomain
//
// So the base_dn would be uid=%fu,ou=people,o=root
// The bind_dn would be the same as based_dn or some super user login.
/*
* example config for Verisign directory
*
$rcmail_config['ldap_public']['Verisign'] = array(
'name' => 'Verisign.com',
'hosts' => array('directory.verisign.com'),
'port' => 389,
'use_tls' => false,
'user_specific' => false, // If true the base_dn, bind_dn and bind_pass default to the user's IMAP login.
// %fu - The full username provided, assumes the username is an email
// address, uses the username_domain value if not an email address.
// %u - The username prior to the '@'.
// %d - The domain name after the '@'.
'base_dn' => '',
'bind_dn' => '',
'bind_pass' => '',
'writable' => false, // Indicates if we can write to the LDAP directory or not.
// If writable is true then these fields need to be populated:
// LDAP_Object_Classes, required_fields, LDAP_rdn
'LDAP_Object_Classes' => array("top", "inetOrgPerson"), // To create a new contact these are the object classes to specify (or any other classes you wish to use).
'required_fields' => array("cn", "sn", "mail"), // The required fields needed to build a new contact as required by the object classes (can include additional fields not required by the object classes).
'LDAP_rdn' => 'mail', // The RDN field that is used for new entries, this field needs to be one of the search_fields, the base of base_dn is appended to the RDN to insert into the LDAP directory.
'ldap_version' => 3, // using LDAPv3
'search_fields' => array('mail', 'cn'), // fields to search in
'name_field' => 'cn', // this field represents the contact's name
'email_field' => 'mail', // this field represents the contact's e-mail
'surname_field' => 'sn', // this field represents the contact's last name
'firstname_field' => 'gn', // this field represents the contact's first name
'sort' => 'cn', // The field to sort the listing by.
'scope' => 'sub', // search mode: sub|base|list
'filter' => '', // used for basic listing (if not empty) and will be &'d with search queries. example: status=act
'fuzzy_search' => true); // server allows wildcard search
*/
// An ordered array of the ids of the addressbooks that should be searched
// when populating address autocomplete fields server-side. ex: array('sql','Verisign');
$rcmail_config['autocomplete_addressbooks'] = array('sql');
// don't allow these settings to be overriden by the user
$rcmail_config['dont_override'] = array();
// Set identities access level:
// 0 - many identities with possibility to edit all params
// 1 - many identities with possibility to edit all params but not email address
// 2 - one identity with possibility to edit all params
// 3 - one identity with possibility to edit all params but not email address
$rcmail_config['identities_level'] = 0;
// try to load host-specific configuration
// see http://trac.roundcube.net/wiki/Howto_Config for more details
$rcmail_config['include_host_config'] = false;
// don't let users set pagesize to more than this value if set
$rcmail_config['max_pagesize'] = 200;
// mime magic database
$rcmail_config['mime_magic'] = '/usr/share/misc/magic';
// default sort col
$rcmail_config['message_sort_col'] = 'date';
// default sort order
$rcmail_config['message_sort_order'] = 'DESC';
// THIS OPTION WILL ALLOW THE INSTALLER TO RUN AND CAN EXPOSE SENSITIVE CONFIG DATA.
// ONLY ENABLE IT IF YOU'RE REALLY SURE WHAT YOU'RE DOING!
$rcmail_config['enable_installer'] = false;
// Log successful logins
$rcmail_config['log_logins'] = false;
/**
* 'Delete always'
* This setting reflects if mail should be always marked as deleted,
* even if moving to "Trash" fails. This is necessary in some setups
* because a) people may not have a Trash folder or b) they are over
* quota (and Trash is included in the quota).
*
* This is a failover setting for iil_C_Move when a message is moved
* to the Trash.
*/
$rcmail_config['delete_always'] = false;
// Minimal value of user's 'keep_alive' setting (in seconds)
// Must be less than 'session_lifetime'
$rcmail_config['min_keep_alive'] = 60;
// Enable DNS checking for e-mail address validation
$rcmail_config['email_dns_check'] = false;
/***** these settings can be overwritten by user's preferences *****/
// skin name: folder from skins/
$rcmail_config['skin'] = 'default';
// show up to X items in list view
$rcmail_config['pagesize'] = 40;
// use this timezone to display date/time
$rcmail_config['timezone'] = 'auto';
// is daylight saving On?
$rcmail_config['dst_active'] = (bool)date('I');
// prefer displaying HTML messages
$rcmail_config['prefer_html'] = TRUE;
// display remote inline images
// 0 - Never, always ask
// 1 - Ask if sender is not in address book
// 2 - Always show inline images
$rcmail_config['show_images'] = 0;
// compose html formatted messages by default
$rcmail_config['htmleditor'] = FALSE;
// show pretty dates as standard
$rcmail_config['prettydate'] = TRUE;
// save compose message every 300 seconds (5min)
$rcmail_config['draft_autosave'] = 300;
// default setting if preview pane is enabled
$rcmail_config['preview_pane'] = FALSE;
// focus new window if new message arrives
$rcmail_config['focus_on_new_message'] = true;
// Clear Trash on logout
$rcmail_config['logout_purge'] = FALSE;
// Compact INBOX on logout
$rcmail_config['logout_expunge'] = FALSE;
// Display attached images below the message body
$rcmail_config['inline_images'] = TRUE;
// Encoding of long/non-ascii attachment names:
// 0 - Full RFC 2231 compatible
// 1 - RFC 2047 for 'name' and RFC 2231 for 'filename' parameter (Thunderbird's default)
// 2 - Full 2047 compatible
$rcmail_config['mime_param_folding'] = 0;
// Set TRUE if deleted messages should not be displayed
// This will make the application run slower
$rcmail_config['skip_deleted'] = FALSE;
// Set true to Mark deleted messages as read as well as deleted
// False means that a message's read status is not affected by marking it as deleted
$rcmail_config['read_when_deleted'] = TRUE;
// Set to TRUE to newer delete messages immediately
// Use 'Purge' to remove messages marked as deleted
$rcmail_config['flag_for_deletion'] = FALSE;
// Default interval for keep-alive/check-recent requests (in seconds)
// Must be greater than or equal to 'min_keep_alive' and less than 'session_lifetime'
$rcmail_config['keep_alive'] = 60;
// If true all folders will be checked for recent messages
$rcmail_config['check_all_folders'] = FALSE;
// If true, after message delete/move, the next message will be displayed
$rcmail_config['display_next'] = FALSE;
// If true, messages list will be sorted by message index instead of message date
$rcmail_config['index_sort'] = TRUE;
// end of config file
?>db.inc.php
Код: Выделить всё
<?php
/*
+-----------------------------------------------------------------------+
| Configuration file for database access |
| |
| This file is part of the RoundCube Webmail client |
| Copyright (C) 2005-2009, RoundCube Dev. - Switzerland |
| Licensed under the GNU GPL |
| |
+-----------------------------------------------------------------------+
*/
$rcmail_config = array();
// PEAR database DSN for read/write operations
// format is db_provider://user:password@host/database
// For examples see http://pear.php.net/manual/en/package.database.mdb2.intro-dsn.php
// currently supported db_providers: mysql, mysqli, pgsql, sqlite, mssql
$rcmail_config['db_dsnw'] = 'mysql://roundcube:1qasw23edfr4@localhost/roundcube';
// postgres example: 'pgsql://roundcube:pass@localhost/roundcubemail';
// Warning: for SQLite use absolute path in DSN:
// sqlite example: 'sqlite:////full/path/to/sqlite.db?mode=0646';
// PEAR database DSN for read only operations (if empty write database will be used)
// useful for database replication
$rcmail_config['db_dsnr'] = '';
// maximum length of a query in bytes
$rcmail_config['db_max_length'] = 512000; // 500K
// use persistent db-connections
// beware this will not "always" work as expected
// see: http://www.php.net/manual/en/features.persistent-connections.php
$rcmail_config['db_persistent'] = FALSE;
// you can define specific table names used to store webmail data
$rcmail_config['db_table_users'] = 'users';
$rcmail_config['db_table_identities'] = 'identities';
$rcmail_config['db_table_contacts'] = 'contacts';
$rcmail_config['db_table_session'] = 'session';
$rcmail_config['db_table_cache'] = 'cache';
$rcmail_config['db_table_messages'] = 'messages';
// you can define specific sequence names used in PostgreSQL
$rcmail_config['db_sequence_users'] = 'user_ids';
$rcmail_config['db_sequence_identities'] = 'identity_ids';
$rcmail_config['db_sequence_contacts'] = 'contact_ids';
$rcmail_config['db_sequence_cache'] = 'cache_ids';
$rcmail_config['db_sequence_messages'] = 'message_ids';
// end db config file
?>