Решено: Помогите правильно собрать MySQL для kde/amarok

[UserOnStart]

Доброго времени. Прошу помощи в сборке MySQL для kde/amarok.

Получил с официального сайта исходники mysql-5.5.8 Далее распаковал их, выяснил что configure там теперь нет, все конфигуряет cmake. Но у меня был исходник предыдущего rc, а там оно еще было. Потому я просто влил в исходники 5.5.8 недостающие файлы.
Далее конфигурирую так:
./configure --prefix=/usr --libdir=/usr/lib --sysconfdir=/etc --libexecdir=/usr/sbin --localstate=/srv/mysql --enable-thread-safe-client --enable-assembler --enable-local-infile --with-named-thread-libs=-lpthread --with-unix-socket-path=/var/run/mysql/mysql.sock --without-debug --without-readline --with-pic --with-embedded-server
После make, make install, сборка пакета. Далее пытаюсь mysql_install_db, но он в системных путях не находится. Он лежит в /usr/scripts. Топаю туда, запускаю - скрипт не находит набор каталога data. Правлю в mysql_install_db поля basedir="/usr" ldata=".data". Вроде как проходит нормально:

Код: Выделить всё

Installing MySQL system tables...
OK
Filling help tables...
OK

To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:

/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h uix password 'new-password'

Alternatively you can run:
/usr/bin/mysql_secure_installation

which will also give you the option of removing the test
databases and anonymous user created by default.  This is
strongly recommended for production servers.

See the manual for more instructions.

You can start the MySQL daemon with:
cd /usr; /usr/bin/mysqld_safe &

You can test the MySQL daemon with mysql-test-run.pl
cd /usr/mysql-test; perl mysql-test-run.pl

Please report any problems with the /usr/scripts/mysqlbug script!

Далее пробую:

Код: Выделить всё

bash-3.1# mysqld_safe &
110205 02:40:17 mysqld_safe Logging to '/usr/data/uix.err'.
110205 02:40:18 mysqld_safe Starting mysqld daemon with databases from /usr/data
110205 02:40:18 mysqld_safe mysqld from pid file /usr/data/uix.pid ended

При попытке обращения к серверу выдает: ERROR 2002 (HY000):

Код: Выделить всё

bash-3.1# mysql -u root
Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)

Очевидно причина в том что сервер не запущен. Стартовый скрипт показывает что сервер запускается и тут же останавливается. Я с sql не знаком и все что мне попадалось в нете написано (для меня) очень невнятно и ориентировано на старые версии.
Подскажите что делать.
(дистр 13-ая Slackware)

[Aectann]

Было бы неплохо посмотреть содержимое /etc/my.cnf (основной конфиг mysql) и /usr/data/uix.err (лог-файл).

[kisil]

А не проще было собрать так, как рекомендовали разработчики - с помощью cmake?

[UserOnStart]

Не проще ли собрать через cmake? Может и проще, только вот какие ключи при сборке передавать я не знаю. Среди тех пояснения которых я нашел есть не все нужные. Если бы попалось какое более-менее внятное описание, сделал бы по нему.
Спасибо что напомнили про my.cnf. Он не создается сам, потому скопировал в качестве него my-medium.cnf

Код: Выделить всё

# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password    = your_password
port        = 3306
socket        = /tmp/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port        = 3306
socket        = /tmp/mysql.sock
skip-external-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id    = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password>;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Uncomment the following if you are using InnoDB tables
innodb_data_home_dir = /var/lib/mysql
#innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = /var/lib/mysql
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

Ну и uix.err такой:

Код: Выделить всё

110120 15:59:29 mysqld_safe Starting mysqld daemon with databases from /usr/data
/usr/bin/mysqld: File './mysql-bin.index' not found (Errcode: 13)
110120 15:59:29 [ERROR] Aborting

110120 15:59:29 [Note] /usr/bin/mysqld: Shutdown complete

110120 15:59:30 mysqld_safe mysqld from pid file /usr/data/uix.pid ended
110205 02:40:18 mysqld_safe Starting mysqld daemon with databases from /usr/data
/usr/bin/mysqld: File './mysql-bin.index' not found (Errcode: 13)
110205  2:40:18 [ERROR] Aborting

110205  2:40:18 [Note] /usr/bin/mysqld: Shutdown complete

110205 02:40:18 mysqld_safe mysqld from pid file /usr/data/uix.pid ended

[Aectann]

Закомментируйте в конфиге вот эти строки:

...
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed
...

Ошибка при запуске скорее всего возникла из-за неправильно установленного владельца каталога /usr/data. Сделайте

chown -R mysql:mysql /usr/data

[UserOnStart]

Все оказалось именно так. Правда пришлось еще открыть /usr/scripts/mysql_install_db и подправить строку:

Код: Выделить всё

ldata="/usr/data"

Раньше там стояло "./data"
Ну потом /usr/scripts/mysql_install_db --user=mysql, а дальше понятно.