Debian testing
Ядро 2.6.38-2-686
Ati xpress 1100
Драйвера
aptitude install firmware-linux-nonfree
aptitude install libgl1-mesa-dri
cp /var/log/Xorg.0.log /var/log/Xorg.1.log
Xorg -configure :1
Код: Выделить всё
X.Org X Server 1.10.2
Release Date: 2011-05-28
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
Current Operating System: Linux solnce 2.6.38-2-686 #1 SMP Sun May 8 14:49:45 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=7d1c1ffd-ca33-47d2-b6bd-2f1c52afde1f ro quiet
Build Date: 14 June 2011 01:03:32PM
xorg-server 2:1.10.2-1+b1 (i386 Build Daemon (murphy) <buildd_i386-murphy@buildd.debian.org>)
Current version of pixman: 0.21.8
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Jun 19 12:50:53 2011
List of video drivers:
mach64
vboxvideo
geode
vmware
intel
s3virge
mga
r128
rendition
fglrx
tseng
voodoo
tdfx
s3
ztv
radeon
openchrome
sis
i128
siliconmotion
ati
cirrus
neomagic
savage
apm
trident
sisusb
vmwlegacy
nouveau
chips
i740
ark
fbdev
vesa
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to to load module/driver vmwgfx
(EE) No supported AMD display adapters were found
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting.
Number of created screens does not match number of detected devices.
Configuration failed.gedit /root/xorg.conf.new
Код: Выделить всё
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "dri2"
Load "record"
Load "fglrx-libglx"
Load "dri"
Load "dbe"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:5:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # <str>
#Option "fbdev" # <str>
#Option "debug" # [<bool>]
Identifier "Card1"
Driver "fbdev"
BusID "PCI:1:5:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card2"
Driver "vesa"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Card2"
Monitor "Monitor2"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionНапример при запуске 3D игры (хотя 3d панель cairo dock работатет)
Код: Выделить всё
/usr/games/nexuiz
Nexuiz Linux 18:20:08 Mar 25 2011 - debug
Trying to load library... "libz.so.1" - loaded.
Added packfile /usr/share/games/nexuiz/data/data.pk3 (3664 files)
Added packfile /usr/share/games/nexuiz/data/music.pk3 (18 files)
Added packfile /usr/share/games/nexuiz/data/textures.pk3 (5370 files)
Trying to load library... "libcurl.so.4" - loaded.
Failed to init SDL joystick subsystem:
Trying to load library... "libvorbis.so.0" - loaded.
Trying to load library... "libvorbisfile.so.3" - loaded.
Trying to load library... "libmodplug.so.0" "libmodplug.so" "/usr/games/libmodplug.so.0" "/usr/games/libmodplug.so" - failed.
Trying to load library... "libogg.so.0" - loaded.
Trying to load library... "libtheora.so.0" - loaded.
Trying to load library... "libvorbis.so.0" - loaded.
Trying to load library... "libvorbisenc.so.2" - loaded.
Trying to load library... "libOffscreenGecko.so" "/usr/games/libOffscreenGecko.so" - failed.
execing quake.rc
execing default.cfg
execing defaultNexuiz.cfg
execing physics26.cfg
execing ctfscoring-div0.cfg
execing balance.cfg
execing effects-normal.cfg
execing turrets.cfg
execing unit_machinegun.cfg
execing unit_hk.cfg
execing unit_hellion.cfg
execing unit_mlrs.cfg
execing unit_flac.cfg
execing unit_fusreac.cfg
execing unit_plasma.cfg
execing unit_plasma2.cfg
execing unit_tesla.cfg
execing unit_phaser.cfg
execing unit_walker.cfg
execing unit_ewheel.cfg
couldn't exec unit_repulsor.cfg
execing config.cfg
execing data/campaign.cfg
execing config_update.cfg
couldn't exec autoexec.cfg
Client using an automatically assigned port
Client opened a socket on address local:2
Client opened a socket on address 0.0.0.0:0
Client opened a socket on address [0:0:0:0:0:0:0:0]:0
Initializing Video Mode: fullscreen 1024x768x32x60hz
Linked against SDL version 1.2.14
Using SDL library version 1.2.14
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 15
Current serial number in output stream: 15glxgears
Код: Выделить всё
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 14
Current serial number in output stream: 14glxinfo | grep render
Код: Выделить всё
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 14
Current serial number in output stream: 14