Греется ноутбук

[JustJazZ]

Всем доброе время суток. Возникла проблема. На ноутбук поставил Debian Wheezy + KDE , установил и настроил bumblebbe , после cpufreqd выбрал режим conservative.
температура с просто запущенным браузером 67 + пару программ и уже 73,74. Частота постоянно 2100. Посоветуйте утилиты или возможно есть советы по снижению температуры.

и может кто знает, Xfce в плане потребления ресурсов проще чем KDE?

[JustJazZ]

помогите пожалуйста , я уже и Xfce поставил, все равно температура высокая , неужели на винду обратно

[Bizdelnick]

Температура чего, CPU? Если да, то какой он? В top ничего подозрительного? Вентиляторы нормально работают? Вывод cpufreq-info сюда.

[taaroa]

неужели на винду обратно

доктор сказал: "на винду!", значит - на винду!

модель ноутбука (хотя бы) напишите, по-жа-луй-ста.

[liaonau]

температура с просто запущенным браузером 67 + пару программ и уже 73,74.

У меня всегда так, месяца через 3 после чистки кулера. Может быть и вам просто стоит почистить?

[JustJazZ]

Модель ноутбука: Asus k53sj

optirun --status

Bumblebee status: Ready (3.0). X inactive.

sensors

acpitz-virtual-0
Adapter: Virtual device
temp1: +67.0°C (crit = +88.0°C)

asus-isa-0000
Adapter: ISA adapter
temp1: +67.0°C

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +67.0°C (high = +71.0°C, crit = +85.0°C)
Core 0: +67.0°C (high = +71.0°C, crit = +85.0°C)
Core 1: +64.0°C (high = +71.0°C, crit = +85.0°C)

cpufreq-info

cpufrequtils 008: cpufreq-info © Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.10 GHz
available frequency steps: 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 2.10 GHz and 2.10 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.10 GHz (asserted by call to hardware).
cpufreq stats: 2.10 GHz:21,96%, 2.00 GHz:0,39%, 1.90 GHz:1,22%, 1.80 GHz:0,72%, 1.70 GHz:3,47%, 1.60 GHz:0,09%, 1.50 GHz:0,11%, 1.40 GHz:0,09%, 1.30 GHz:0,12%, 1.20 GHz:0,16%, 1.10 GHz:0,20%, 1000 MHz:0,34%, 900 MHz:0,44%, 800 MHz:70,69% (2808)
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.10 GHz
available frequency steps: 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 2.10 GHz and 2.10 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.10 GHz (asserted by call to hardware).
cpufreq stats: 2.10 GHz:19,66%, 2.00 GHz:0,06%, 1.90 GHz:1,11%, 1.80 GHz:0,08%, 1.70 GHz:2,81%, 1.60 GHz:0,04%, 1.50 GHz:0,04%, 1.40 GHz:0,06%, 1.30 GHz:0,07%, 1.20 GHz:0,03%, 1.10 GHz:0,09%, 1000 MHz:0,12%, 900 MHz:0,53%, 800 MHz:75,29% (1256)
analyzing CPU 2:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.10 GHz
available frequency steps: 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 2.10 GHz and 2.10 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.10 GHz (asserted by call to hardware).
cpufreq stats: 2.10 GHz:19,04%, 2.00 GHz:0,10%, 1.90 GHz:0,86%, 1.80 GHz:0,11%, 1.70 GHz:2,96%, 1.60 GHz:0,03%, 1.50 GHz:0,03%, 1.40 GHz:0,02%, 1.30 GHz:0,06%, 1.20 GHz:0,03%, 1.10 GHz:0,02%, 1000 MHz:0,06%, 900 MHz:0,24%, 800 MHz:76,43% (783)
analyzing CPU 3:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 3
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.10 GHz
available frequency steps: 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 2.10 GHz and 2.10 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.10 GHz (asserted by call to hardware).
cpufreq stats: 2.10 GHz:19,24%, 2.00 GHz:0,04%, 1.90 GHz:0,63%, 1.80 GHz:0,08%, 1.70 GHz:2,27%, 1.60 GHz:0,04%, 1.50 GHz:0,05%, 1.40 GHz:0,04%, 1.30 GHz:0,05%, 1.20 GHz:0,07%, 1.10 GHz:0,06%, 1000 MHz:0,05%, 900 MHz:0,23%, 800 MHz:77,16% (757)

[liaonau]

available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 2.10 GHz and 2.10 GHz.
The governor "performance" may decide which speed to use
within this range.

Вроде бы используется "perfomance", а не "conservative".

[JustJazZ]

available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 2.10 GHz and 2.10 GHz.
The governor "performance" may decide which speed to use
within this range.

Вроде бы используется "perfomance", а не "conservative".

echo "conservative"> /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo "conservative"> /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo "conservative"> /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
echo "conservative"> /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor

cpufrequtils 008: cpufreq-info © Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.10 GHz
available frequency steps: 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 2.10 GHz and 2.10 GHz.
The governor "conservative" may decide which speed to use
within this range.

watch grep \"cpu MHz\" /proc/cpuinfo


показывает

cpu MHz : 2100.000
cpu MHz : 2100.000
cpu MHz : 2100.000
cpu MHz : 2100.000

[liaonau]

Какая-то программа постоянно занимает процессор?
Посмотрите какая с помощью чего-то там, не помню, графического, htop или на худой конец top или

Код: Выделить всё

watch -n 1 'ps -Ao pcpu,pid,user,args | sort -nrk 1|head -n10'

[JustJazZ]

watch -n 1 'ps -Ao pcpu,pid,user,args | sort -nrk 1|head -n10'

4.0 6620 dima /opt/google/chrome/chrome
2.7 9838 dima /opt/google/chrome/chrome --type=renderer --lang=ru --force-fieldtrials=ConnCountImpact/conn_count_6/ConnnectBackupJobs/Co
2.2 2236 root /usr/bin/Xorg :0 -br -verbose -novtswitch -auth /var/run/gdm3/auth-for-Debian-gdm-GQ4nfX/database -nolisten tcp vt7
1.3 11146 dima /opt/google/chrome/chrome --type=renderer --lang=ru --force-fieldtrials=ConnCountImpact/conn_count_6/ConnnectBackupJobs/Co
1.2 7342 dima /opt/google/chrome/chrome --type=renderer --lang=ru --force-fieldtrials=ConnCountImpact/conn_count_6/ConnnectBackupJobs/Co
0.9 6725 dima /opt/google/chrome/chrome --type=renderer --lang=ru --force-fieldtrials=ConnCountImpact/conn_count_6/ConnnectBackupJobs/Co
0.4 7064 dima /opt/google/chrome/chrome --type=renderer --lang=ru --force-fieldtrials=ConnCountImpact/conn_count_6/ConnnectBackupJobs/Co
0.3 7033 dima /opt/google/chrome/chrome --type=renderer --lang=ru --force-fieldtrials=ConnCountImpact/conn_count_6/ConnnectBackupJobs/Co
0.3 6854 dima /opt/google/chrome/chrome --type=ppapi --channel=6620.18.673639306 --lang=ru
0.2 928 root [rts5139-polling]

может с куллерерами что-то не так? sensors их вообще не опознал, что шумит слышно, но вдруг один из них не работает , я вообще не знаю сколько их.

[Ism]

Похоже это проблема многих Asus
перегревается бук

В ссылке как правильно настроить cpufreq